FIC PA-2006 Manuel utilisateur

PA-2006

MAINBOARD

MANUAL

DOC No. : 15579

Rev. : A2

Date : 4, 1997

Part No. : 25-10580-05

Chapter 1 Overview

Main Features........................................................................................ 2

This User Manual .................................................................................. 4

Something Interesting............................................................................. 5

The BIOS Setup Utility................................................................. 5

IRQ Functionality.......................................................................... 6

DMA Channels of ISA Cards ........................................................ 7

Enhanced IDE............................................................................... 7

Serial Infrared (SIR) Connections.................................................. 8

Highly Convenient Integrated I/O Connectors................................ 9

Chapter 2 Installation Procedures

Mainboard Layout.................................................................................. 12

1). Set System Jumpers .......................................................................... 13

Jumpers ........................................................................................ 13

Clear Password: CPW............................................................ 14

Flash EPROM Type Selection: EP1, EP2............................... 14

CPU to SRAM Data Transacting Mode Selection: SRAM3 ... 15

2). Install DRAM Modules..................................................................... 16

DRAM and SDRAM..................................................................... 16

RAM Module Configuration.......................................................... 17

Install SIMMs............................................................................... 20

Remove SIMMs............................................................................ 20

Install DIMMs .............................................................................. 21

Remove DIMMs............................................................................ 21

Cache Memory.............................................................................. 22

Install Cache SRAM Module......................................................... 22

Onboard Cache SRAM (256KB/512KB) ....................................... 23

Onboard Cache SRAM and SDRAM Module Mixture

(512KB/1MB)............................................................................... 24

SRAM Module (256KB/512KB)................................................... 25

3). Install the CPUs................................................................................ 26

System Clock Selection:

CLK1, CLK2, CLK3.............................................................. 27

Table of Contents

PA-2006 Mainboard Manual

CPU to Bus Frequency Ratio Selection:

FREQ1, FREQ2..................................................................... 27

Intel Pentium CPUs............................................................... 28

Frequency......................................................................... 28

Voltage............................................................................. 29

AMD-K5/K6 CPUs................................................................ 30

Frequency......................................................................... 30

Voltage............................................................................. 31

Cyrix 6x86 CPUs................................................................... 32

Frequency......................................................................... 32

Voltage............................................................................. 33

IBM 6x86 CPUs.................................................................... 34

Frequency......................................................................... 34

Voltage............................................................................. 35

Installation of Cyrix (or IBM) 6x86 CPU Fan......................... 36

4). Install Expansion Cards .................................................................... 37

5). Connect Cables and Power Supply .................................................... 39

Keyboard Connector: AT_KB ................................................ 39

Serial Port Connectors: COM1 and COM2............................. 39

CPU Fan Connectors: FAN.................................................... 40

Floppy Diskette Drive Connector: FLOPPY ........................... 40

Front Panel Block Connector: F_PNL .................................... 41

Infrared Connector: IR ........................................................... 42

Outlet Connector: OUTLET................................................... 42

Power Connector: POWER .................................................... 43

IDE HDD Device Connectors:

PRIMARY and SECONDARY .............................................. 44

Printer Block Connector: PRINTER....................................... 44

Remote Power Connector: RPW_CON................................... 45

Universal Serial Bus Connector: USB1 and USB2

(Reserved For Future Upgrade).............................................. 45

Chapter 3 Award BIOS Setup

CMOS Setup Utility............................................................................... 47

Standard CMOS Setup........................................................................... 48

BIOS Features Setup.............................................................................. 50

Installation Procedures

iii

Chipset Features Setup........................................................................... 53

Power Management Setup...................................................................... 58

PCI Configuration Setup......................................................................... 61

PnP Configuration Setup........................................................................ 63

Load BIOS Defaults............................................................................... 64

Load Setup Defaults............................................................................... 64

Supervisor/User Password...................................................................... 64

IDE HDD Auto Detection....................................................................... 65

Save and Exit Setup............................................................................... 66

Exit without Saving................................................................................ 66

Appendix A Applicatin Note

PA-2006 Mainboard Manual

This Page Intentionally Left Blank

Overview

The PA-2006 mainboard combines the advanced capabilities of the VIA 580VP

chipset with a high-performance concurrent PCI local bus architecture to

provide the ideal platform for unleashing the unsurpassed speed and power of

the Intel Pentium processor.

This highly-flexible mainboard is designed to run a full range of Intel Pentium,

Cyrix 6x86 (M1/M2), IBM 6x86 (M1/ M2), and AMD-K5/K6 processors, and

can be easily upgraded using its 321-pin ZIF socket. The processor's advanced

performance is complemented by a second level write back Pipeline Burst

SRAM cache of up to 1MB (by one cache RAM module slot for 1MB PBSRAM

cache module) and main memory of up to 384MB DRAM. The main memory is

installed using the board's two 72-pin SIMM sockets and two 168-pin DIMM

sockets that accept a choice of lightning-fast synchronous DRAM (SDRAM)

and high-speed EDO DRAM.

The PA-2006 integrates a full set of I/O features onboard, including two

16550A UART compatible serial ports, one EPP/ECP capable parallel port, and

one Floppy Disk Drive controller. It also comes with a built in Enhanced IDE

controller that provides convenient, high-speed PCI Bus Master connections

with up to four IDE devices, including Hard Disk and CD-ROM drives. Four

16-bit ISA slots and four 32-bit PCI slots provide ample room for further

expansion. The mainboard also features support for the state-of-the-art

Universal Serial Bus (USB) that provides ease-of-use and high-speed Plug &

Play connections to future USB compliant peripheral devices. The IrDA

compliant serial port and onboard SIR support further enhance system I/O

connectivity.

This chapter gives you a brief overview of the PA-2006 mainboard. In addition

to basic information on the board's main components and features, it also

provides advice on how to upgrade and expand it. For updated BIOS, drivers,

or product release information, please visit FIC's home page at:

http://www.fic.com.tw.

Chapter 1

PA-2006 Mainboard Manual

Main Features

The PA-2006 mainboard comes with the following high-performance features:

nEasy Installation

Award BIOS with support for Plug and Play, auto detection of Hard Drive

and IDE features, MS Windows 95, and Windows NT compatible.

nFlexible Processor Support

Onboard 321-pin ZIF socket and switching voltage regulator support

complete range of leading-edge processors:

Intel Pentium75MHz – 200MHz (P55C with MMXtechnology;

P54C/P54CS)

AMD-K6-PR166 – PR233

AMD-K5-PR75 – PR166

Cyrix M2 Series processors

Cyrix 6x86-PR120+ – PR200+*

IBM M2 Series processors

IBM 6x86-PR120+ – PR200+*0.

NOTE : * Support for Cyrix 6x86-PR200+ and IBM 6x86-PR200+ is optional.

nLeading Edge Chipset

VIA 580VP chipset, including a CPU interface controller, advanced

cache controller, integrated DRAM controller, synchronous ISA bus

controller, PCI local bus interface, integrated power management unit.

nUltra-fast Level II Cache

Supports onboard 256KB/512KB synchronous PBSRAM cache memory

and one cache module slot for 1MB PBSRAM cache module.

nVersatile Main Memory Support

Accepts up to 256MB RAM in one bank using 72-pin SIMMs of 4, 8, 16,

32, 64, 128MB or up to 128MB RAM in two banks using two 168-pin

DIMMs of 8, 16, 32, 64MB with support for SDRAM and EDO memory.

nISA & PCI Expansion Slots

Four 16-bit ISA and four 32-bit PCI expansion slots provide all the room

you need to install a full range of add-on cards.

Overview

nUSB Support

Onboard support for two Universal Serial Bus connectors via a plug-in

connector.

nEnhanced PCI Bus Master IDE Controller

Integrated Enhanced PCI local bus IDE controller with two connectors

supports up to four IDE devices such as Hard Disk, CD-ROM or Tape

Backup drives via two channels for high speed data throughput. This

controller supports PIO Modes 3 and 4, and DMA Mode 2 for optimized

system performance.

nSuper Multi I/O

Integrated Winbond 83877F chipset features two 16550A UART

compatible serial ports, one EPP/ECP capable parallel port, one IR port,

and

one Floppy Disk Drive connector.

PA-2006 Mainboard Manual

This User Manual

This manual is designed to guide you and facilitate your use of the PA-2006

mainboard. It contains a description of the design and features of the

mainboard, and also includes useful information for changing the configuration

of the board and the system it is installed in. The manual is divided into three

chapters:

nChapter 1 - Overview

gives an overview of the mainboard and describes its major components

and features.

nChapter 2 - Installation Procedures

gives instructions on how to set up the mainboard, including jumper

settings and CPU installation guides.

nChapter 3 - Award BIOS Setup

briefly explains the mainboard's BIOS system setup in general and tells

you

how to run it and change the system configuration settings.

NOTE : The material in this manual is for information only and is subject to

change without notice. We reserve the right to make changes in the product

design without reservation and without notification to its users. We shall not be

liable for technical or editorial omissions made herein; nor for incidental or

consequential damages resulting from the furnishing, performance, or use of

this material.

Overview

Something Interesting

This section provides useful information that you will need to know should you

decide to modify or upgrade the configuration of the mainboard and the system

it is installed in. If you do not have the confidence to upgrade the mainboard

yourself, we advise that you consult a qualified service technician for

assistance.

The BIOS Setup Utility

The BIOS (Basic Input Output System) is the basic firmware that instructs the

computer how to operate. For the BIOS to work properly, there must be a

record of the computer's hardware and configuration settings for it to refer to.

This record is created using the Setup Utility, a program that is stored

permanently in the BIOS ROM chip on the mainboard.

The system configuration record created by the Setup Utility is also stored on

the mainboard, but not permanently. This section of the memory it is stored is

in the NVRAM.

When you buy your computer, the system configuration record will already be

set and may in some cases differ from the basic defaults. The first time you use

your computer or when you need to re-configure your system, you should run

the Setup Utility and write down the settings.

Table des matières

Autres manuels FIC Carte mère

Manuels Carte mère populaires d'autres marques

DFI

DFI SD170 Manuel utilisateur

ASROCK

ASROCK ROMED8-2T Manuel utilisateur

Asus

Asus P2L97A Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Asus

Asus MES-B Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

Commell

Commell MS-C73 Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Biostar

Biostar M7VIT Bravo Instructions d'utilisation et d'installation

Intel

Intel D33217CK Manuel utilisateur

Asus

Asus F1A55-M LX PLUS R2.0 Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

Asus

Asus EX-B760M-V5 D4 Manuel utilisateur

EPOX

EPOX MU-8KHA0010 Manuel utilisateur