DMP Electronics 780 Guide d'installation

INSTALLATION AND PROGRAMMING GUIDE

780 Keypad

Demonstrator Module

About the 780............................................. 1

Compatibility.......................................................... 1

Included Items ....................................................... 1

780 Features ...............................................2

Install the 780 .............................................3

Mount the Demo Module.................................. 3

Power Up to Demo Module............................. 4

Connect the Keypad .......................................... 6

Program Keypads for Demonstrations....8

Icon Series Keypad ............................................. 8

Thinline™ Keypad................................................. 8

Keypad Address................................................... 8

Keypad Mode ....................................................... 8

7800 Keypad......................................................... 9

Keypad Address................................................... 9

Keypad Mode ....................................................... 9

TABLE OF CONTENTS

Program Keypads for Fire Panic

Demonstrations ........................................10

Icon Series Keypad ............................................10

Fire Key (F 1) ........................................................10

Thinline Keypad....................................................11

7800 Keypad.........................................................11

Arm Panic Keys ...................................................11

Program the Graphic Keypad for

Z-Wave Demonstrations.......................... 12

Program an Arming System

for the 780................................................. 13

Icon Series Keypad ............................................13

All/Perimeter........................................................13

Home/Sleep/Away.............................................13

Thinline Keypad...................................................14

7800 Keypad........................................................14

Programer .............................................................14

Arming System ...................................................14

Programer .............................................................14

Arming System ...................................................14

7800 Keypad........................................................15

780 Demonstration .................................. 16

Keypad Operation..............................................16

User Menu Options ............................................17

Keypad Shortcut Key Options.......................19

7800 Keypads Carousel

Menu Options......................................................20

Arm an Area System .........................................21

Arm an All/Perim

and H S A Systems............................................22

Disarm an Area System...................................23

Disarm an All/Perim

and H S A Systems............................................24

Front Door Zone Alarm

for an Area System ...........................................25

Front Door Zone Alarm

for an All/Perim

and H S A Systems............................................26

Fire Alarm for Icon

or Thinline Keypads.......................................... 27

Fire Alarm for 7800 Keypad.........................28

Weather Demonstration

for Thinline and 7800 Series Keypads ......29

Z-Wave Demonstration

for 7800 Series Keypads .............................. 30

Accessories................................................32

Digital Monitoring Products, Inc. | 780 Installation and Programming Guide 1

The DMP 780 Keypad Demonstrator Module is a portable module that connects to any

DMP Thinline, Icon Series, or 7800 Series Graphic Touchscreen keypad to demonstrate

keypad operation for sales and training presentations.

The module can demonstrate the Area, All/Perimeter, or Home/Sleep/Away systems and

can simulate arming and disarming. The 780 Demo also provides access to the following

User Menu options: ALARM SILENCE, SENSOR RESET, ARMED AREAS, ZONE MONITOR,

and USER CODES.

Compatibility

• Thinline keypad

• Icon Series keypad

• 7800 Series Graphic Touchscreen

keypad

Included Items

• One 780 Module (base and cover)

• One 9 V Battery

• One DC Power Supply

• Hardware pack

ABOUT THE 780

2 780 Installation and Programming Guide | Digital Monitoring Products, Inc.

780 FEATURES

Figure 1: Product Features

699 DMP Desk Stand

780 Demo Module

Thinline Keypad

DC Power Supply Connection

4-Wire Harness from Keypad

to 780 Module J2 or J8 Connector

Digital Monitoring Products, Inc. | 780 Installation and Programming Guide 3

INSTALL THE 780

Mount the Demo Module

The 780 can be permanently mounted to the lower section of any Model 699 DMP

Keypad Desk Stand.

Use the included adhesive foam or screws to attach the demo module to the desk

stand base.

The mounting location is shown in Figure 1.

4 780 Installation and Programming Guide | Digital Monitoring Products, Inc.

Power Up to Demo Module

Battery Operation for Thinline or Icon Series

Use the following steps to install and activate 9 VDC Battery operation.

1. Squeeze the top and bottom of the 780 module case to remove the cover.

2. Install the 9 VDC battery in the battery compartment. Observe polarity when

installing the battery. See Figure 2.

3. Install the jumper on the battery header (Battery ON/OFF) to enable battery

operation. See Figure 2.

DC Power Supply Operation

Use the following steps to connect the DC power supply.

1. Plug the barrel connector into the DC power supply plug on the side of the

780 module. See Figure 2.

2. Plug the DC Power Supply into a 110 Volt AC outlet.

Note: DC power supply operation automatically overrides and internally

disconnects battery operation. The DC Power Supply is required for use with the

7800 Series Graphic Touchscreen keypad.

Digital Monitoring Products, Inc. | 780 Installation and Programming Guide 5

Power

Supply

To Keypad

To Keypad PWR

BATTERY

ON/OFF

RED

BLK

RED

BLK

DC Power Supply Plug

Battery

Compartment

MODEL

780

Figure 2: 780 PCB Layout and Power Options

6 780 Installation and Programming Guide | Digital Monitoring Products, Inc.

Connect the Keypad

RED

BLK

RED

BLK

4-pin Header Locations

Main Optional

Figure 3: Keypad Connectors

Icon or Thinline Keypad

1. Remove the keypad cover, with circuit board and components attached, from the

keypad base.

2. Align the keypad base to the four keypad mounting holes on the 699 Deskstand.

3. Insert the screws through the keypad base and deskstand.

4. Use a Phillips-head screwdriver to tighten the four screws into place.

5. Run the 4-wire harness through the opening in the deskstand and keypad base.

6. Observe wire colors and plug one end of the 4-wire harness into the back of

the keypad.

7. Connect the opposite end of the 4-wire harness to the 4-wire header in the top

of the 780 housing. When using a second keypad, connect the second 4-wire

harness to the 4-wire header.

Note: It is not necessary to remove the 780 module cover to complete the

keypad connection.

Table des matières

Autres manuels DMP Electronics Unité de contrôle

DMP Electronics

DMP Electronics SCS-104 Manuel utilisateur

DMP Electronics

DMP Electronics 734 Guide d'installation

DMP Electronics

DMP Electronics 263EXT Manuel utilisateur

DMP Electronics

DMP Electronics 714N-POE Guide d'installation

DMP Electronics

DMP Electronics 734B Guide d'installation

DMP Electronics

DMP Electronics X1 Guide d'installation

DMP Electronics

DMP Electronics 867 W LX-BUS Manuel utilisateur

DMP Electronics

DMP Electronics 1116 Manuel utilisateur

DMP Electronics

DMP Electronics 867 Style W Manuel utilisateur

DMP Electronics

DMP Electronics 736P Radionics Manuel utilisateur

DMP Electronics

DMP Electronics RoBoard RM-G146 Manuel utilisateur

DMP Electronics

DMP Electronics 865 Manuel utilisateur

DMP Electronics

DMP Electronics RoBoard RM-G211 Manuel utilisateur

DMP Electronics

DMP Electronics Wiegand 734N Guide d'installation

DMP Electronics

DMP Electronics 716 Manuel utilisateur

DMP Electronics

DMP Electronics 734 Guide d'installation

DMP Electronics

DMP Electronics Wiegand 734N Manuel utilisateur

DMP Electronics

DMP Electronics 861 Manuel utilisateur

DMP Electronics

DMP Electronics 893A Manuel utilisateur

DMP Electronics

DMP Electronics 734 Guide d'installation

DMP Electronics

DMP Electronics RoBoard RM-G144 Manuel utilisateur

DMP Electronics

DMP Electronics 1134 Guide d'installation

DMP Electronics

DMP Electronics 734N Series Guide d'installation

DMP Electronics

DMP Electronics XR100 Manuel utilisateur

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur