Digitus DA-70544 Manuel utilisateur

- 1 -

DUAL Docking Station

User Manual

DA-70544

Introduction：

DA-70544 is an USB2.0/E-SATA to dual SATA HDD docking station that

allows direct data exchanging between SATA II 3.0G and High-speed

USB. It supports Offline Clone, which is able to copy data and system

files from Source HDD to Target HDD completely via finger touch.

Function Chart：

1、Power switch (ON/OFF) 2、DC input 3、USB interface

4、E-SATA interface 5、Power indicator

6、Bay‘A’ indicator 7、Bay ‘B’ indicator

8、Clone processing indicator 9、Clone button

- 2 -

Caution:

1. Once using E-SATA interface, it can only recognize one HDD

in PC. If 2 HDDs are inserted in the dock, it can only recognize

Bay ‘A’ HDD. If only insert one HDD in the dock, both Bay’A’ and

Bay ’B’ can be recognized.

Function：

* Complies with Serial ATA International Organization:

Serial ATA Revision 2.6

* Supports SATA 1.5G/3.0G Speed

* Supports SATA Hot swap

* Supports SATA Host/Device controller configuration

* Complies with USB 2.0 electrical specification

* Supports USB 2.0 High-Speed and Full-Speed

* Complies with USB Mass Storage Class, Bulk-Only Transport

Specification

* Supports clone function

* Supports Win 98/ME/2000/XP/VISTA /WIN7

Mac OS 9.X/10.X /Linux

CLONE:

Please note the below conditions before clone:

-Bay ‘A’ = SOURCE HDD,

-Bay ’B’ = TARGET HDD

-TARGET HDD ‘s capacity MUST be larger than SOURCE

HDD, otherwise the CLONE cannot be completed. (Same

capacity is also not acceptable)

- 3 -

-Before CLONE function starts, make sure the information

in TARGET HDD is not important; once CLONE started, all

information from the SOURCE HDD will be covered into

TARGET HDD..

-Once the docking is connected to USB interface, the offline

Clone will be invalid.

Offline clone

a、Insert source HDD to Bay ‘A’; target HDD to Bay ‘B’, and then

turn on the power

b、Once the Bays indicators are on, that means DA-70544 is

ready for clone.

- 4 -

c、Press and hold the clone button for 3 seconds until the

indicator light is on, press the button once more for Clone

confirmation. Offline clone is starting to process.

d、Clone progress indicator flashes and shows the progress

(25%, 50%, 75%, 100%).

- 5 -

e、Once clone is finished, all progress indicators will light up.

f、Turn off power and take out the HDD carefully

HDD Partition

a、Open Disk management and select the unallocated area

b、Right click 〝New partition〞for further action

- 6 -

c、“Next”

- 7 -

d、Base on your need and click “Next”

e、Please enter the new partition capacity and click “Next” for

further action

- 8 -

f、Assign the drive letter and “Next”

g、Select “quick format” to format the new partition

- 9 -

h、Click “finish”

i、Partition completed, the new partition can be found.

Table des matières

Autres manuels Digitus Station d'accueil

Digitus

Digitus DA-70548 Manuel utilisateur

Digitus

Digitus DA-70881 Manuel utilisateur

Digitus

Digitus DA-70541-1 Manuel utilisateur

Digitus

Digitus DA-71545 Manuel utilisateur

Digitus

Digitus DA-70863 Manuel utilisateur

Digitus

Digitus DA-70875 Manuel utilisateur

Digitus

Digitus DA-70884 Manuel utilisateur

Digitus

Digitus DA-70543 Manuel utilisateur

Digitus

Digitus DA-70891 Manuel utilisateur

Digitus

Digitus DA-70868 Manuel utilisateur

Digitus

Digitus DA-70862 Manuel utilisateur

Digitus

Digitus DA-70896 Manuel utilisateur

Digitus

Digitus USB 3.0 Dual SATA HDD Manuel utilisateur

Digitus

Digitus DA-71540-1 Manuel utilisateur

Digitus

Digitus DA-70876 Manuel utilisateur

Digitus

Digitus DA-70890 Manuel utilisateur

Digitus

Digitus DA-70590 Manuel utilisateur

Digitus

Digitus DA-70541 Manuel utilisateur

Digitus

Digitus DA-71547 Manuel utilisateur

Digitus

Digitus DA-70897 Manuel utilisateur

Digitus

Digitus USB Type-C DA-70864 Manuel utilisateur

Digitus

Digitus 4016032435396 Manuel utilisateur

Digitus

Digitus DA-70895 Manuel utilisateur

Digitus

Digitus DA-70543-1 Manuel utilisateur

Manuels Station d'accueil populaires d'autres marques

Sony

Sony Dream Machine XDR-DS12iP Manuel utilisateur

Acer

Acer USB Type-C Dock II Manuel utilisateur

ATEN

ATEN UC-2000 Manuel utilisateur

Xcellon

Xcellon HDD-202 Manuel utilisateur

Dok

Dok CR09 Manuel utilisateur

Philips

Philips BTM630/12 Manuel utilisateur

IOGear

IOGear Travel Pro GUD3C09 Manuel utilisateur

RKI

RKI SDM-E2 Manuel utilisateur

iHome

iHome iP15 Manuel utilisateur

VITURE ONE

VITURE ONE MOBILE DOCK Manuel utilisateur

Lindy

Lindy 42984 Manuel utilisateur

CipherLab

CipherLab 8001 Manuel utilisateur

Pyle

Pyle PIPDSP2 Manuel utilisateur

Avol

Avol AS2350 Manuel utilisateur

Datalogic

Datalogic JoyaTouch Manuel utilisateur

Philips

Philips DC190/79 Manuel utilisateur

Targus

Targus DOCK315EUZ Manuel utilisateur

Akasa

Akasa DuoDockX3 AK-DK08U3-BK Manuel utilisateur