Philips BTM630/12 Manuel utilisateur
3
1
2
What’s in the Box?
You should find these items upon opening the box.
1
Quick Start Guide
2
User Manual
Aux-in Cable MW antenna
FM antenna
Remote Control with
two AAA batteries
Quick Start Guide
User manual
Quick Start Guide
BTM630
AC power adaptor 8 X iPod dock adaptors
BTM630 QSG_12_Eng 2007.9.24, 16:261
AC power adaptor
MW loop
antenna
FM wire antenna
Connect the MW and FM antennas.
Connect the AC power adaptor of the system.
1
2
Tips
– See the User Manual for how to
connect other equipment to this
system.
– Use the supplied AC power
adaptor only! Using any other
power connection device may
damage your main set!
21
Setting the clock
1
2
3
In standby mode, press PROG on the system (or PROG/CLOCK on the remote control).
➜ SET CLOCK is displayed briefly.Then, 12HR or 24HR is displayed.
Press ALBUM•PRESET +/- on the system (or 3/4on the remote control) to select
clock mode. Press PROG on the system (or PROG/CLOCK on the remote control) to
confirm.
➜The clock digits for the hours continue to flash.
Press ALBUM•PRESET +/- on the system (or 3/4on the remote control) to set the
hours.
Press PROG on the system (or PROG/CLOCK on the remote control) again.
➜The clock digits for the minutes flash.
Press ALBUM•PRESET +/- on the system (or 3/4on the remote control) to set the
minutes.
Press PROG on the system (or PROG/CLOCK on the remote control) to confirm the
time.
4
5
6
BTM630 QSG_12_Eng 2007.9.24, 16:262
Enjoy
C
Playing a disc
1
2
3
Insert a disc into the disc loader.
➜Make sure the label side is facing up.
In DISC mode, press ÉÅ to start playback.
To stop playback, press 9.
1
2
3
Insert the USB device’s USB plug into the socket or fully insert the SD/MMC card into
the SD • MMC slot on the top of the system.
Press SOURCE once or more (or USB/CARD on the remote control) to select USB/
CARD.
Play the available audio files as you do with the albums/tracks on a CD.
Playing a USB mass storage device/SD/MMC card
With the Hi-Fi system, you can use USB flash memory (USB 2.0 or USB1.1),
USB flash players (USB 2.0 or USB1.1), memory cards.
Operating a Bluetooth-enabled device via the system
1
2
3
4
5
6
Place a Bluetooth-enabled device for pairing within 10 meters from the system.
Press SOURCE on the top of the system (or BLUETOOTH on the remote control) to
select the Bluetooth source.
Press and hold ANSWER/PAIRING on the top of the system or the remote control
for more than 3 seconds.
Set the Bluetooth-enabled device to search for other available Bluetooth devices until it
recognizes “PHILIPS BTM630”.
Select “PHILIPS BTM630” and wait until you hear a double beep from the system and the
Bluetooth icon turns on.
➜Enter “0000” when prompted for a keyword.
For a paired HFP and/or HSP mobile phone, you can receive, reject or hold a call via the
system with the ANSWER/PAIRING , REJECT and 9buttons respectively.
●For a paired A2DP device, you can enjoy music from it with the ÉÅ, ¡ / ™, S/Tand
9 buttons via the system.
BTM630 QSG_12_Eng 2007.9.24, 16:263
Enjoy
C
Tip
Detailed playback features and additional functions are described in the
accompany owner's manual.
CRoyal Philips Electronics N.V. 2007
All rights reserved. PDCC-JS-0739 GB
Playing Apple iPod using BTM630
1
2
3
Select the correct dock adaptor, as indicated on each adaptor, then fit it in
the dock.
Correctly place the compatible iPod player into the dock.
Press SOURCE on the system repeatedly or iPod on the remote control
to select the iPod source.
Power on your iPod player.
Select and play your favourite songs stored in the iPod player.
4
5
Programming and tuning to radio stations
1
2
3
Press SOURCE repeatedly (or TUNER on the remote control) to
select the tuner source.
Press PROG on the system (or PROG/CLOCK on the remote
control) for more than two seconds to program all available stations
in order of waveband.
Press ALBUM•PRESET +/- on the system (or 3/4on the remote
control) until the desired preset station is displayed.
Notes for remote control:
–First select the source you wish to
control by pressing one of the source
select keys on the remote control (for
example CD,TUNER).
–Then select the desired function (for
example
ÉÅ
,
à
,
á
).
BTM630 QSG_12_Eng 2007.9.24, 16:264
Autres manuels pour BTM630/12
2
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Philips Station d'accueil
Philips
Philips DCM230 Manuel utilisateur
Philips
Philips DCD778 Manuel utilisateur
Philips
Philips AZD1755 Manuel utilisateur
Philips
Philips DCM250 Manuel utilisateur
Philips
Philips DC5070/10 Manuel utilisateur
Philips
Philips ORD7100R Manuel utilisateur
Philips
Philips DC6210/37 Manuel utilisateur
Philips
Philips DC570 Manuel utilisateur
Philips
Philips DC291/98 Manuel utilisateur
Philips
Philips SBD8000/05 Manuel utilisateur
Philips
Philips DC220 Manuel utilisateur
Philips
Philips DCB242/05 Manuel utilisateur
Philips
Philips Streamium DC1050/12 Manuel utilisateur
Philips
Philips DCB210/05 Manuel utilisateur
Philips
Philips DC315/79 Manuel utilisateur
Philips
Philips DC320/98 Manuel utilisateur
Philips
Philips BTM630/37B Manuel utilisateur
Philips
Philips DC199B Manuel utilisateur
Philips
Philips DCB-352 Manuel utilisateur
Philips
Philips AZ1330D/37B Manuel utilisateur
