Advantech UbiQ-480 Manuel utilisateur

User Manual

UbiQ-480

Residential e-Home Terminal

UbiQ-480 User Manual ii

The documentation and the software included with this product are copyrighted 2009

by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right

to make improvements in the products described in this manual at any time without

notice. No part of this manual may be reproduced, copied, translated or transmitted

in any form or by any means without the prior written permission of Advantech Co.,

Ltd. Information provided in this manual is intended to be accurate and reliable. How-

ever, Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringe-

ments of the rights of third parties, which may result from its use.

Acknowledgements

Intel and Pentium are trademarks of Intel Corporation.

Microsoft Windows and MS-DOS are registered trademarks of Microsoft Corp.

All other product names or trademarks are properties of their respective owners.

Part No. 2008048000 Edition 1

Printed in Taiwan October 2009

iii UbiQ-480 User Manual

Warnings and Cautions

Warning! Warnings indicate conditions, which if not observed, can cause personal

injury!

Caution! Cautions are included to help you avoid damaging hardware or losing

data.

e.g.:

There is a danger of a new battery exploding if it is incorrectly installed.

Do not attempt to recharge, force open, or heat the battery. Replace the

battery only with the same or equivalent type recommended by the man-

ufacturer. Discard used batteries according to the manufacturer's

instructions.

UbiQ-480 User Manual iv

Declaration of Conformity

This product has passed the CE test for environmental specifications when shielded

cables are used for external wiring. We recommend the use of shielded cables.

This product has passed the CE test for environmental specifications. Test conditions

for passing included the equipment being operated within an industrial enclosure. In

order to protect the product from being damaged by ESD (Electrostatic Discharge)

and EMI leakage, we strongly recommend the use of CE-compliant industrial enclo-

sure products.

FCC Class B

Note: This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installa-

tion. This equipment generates, uses and can radiate radio frequency energy and, if

not installed and used in accordance with the instructions, may cause harmful inter-

ference to radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause harmful interfer-

ence to radio or television reception, which can be determined by turning the equip-

ment off and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

!Reorient or relocate the receiving antenna.

!Increase the separation between the equipment and receiver.

!Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Warning! Any changes or modifications made to the equipment which are not

expressly approved by the relevant standards authority could void your

authority to operate the equipment.

v UbiQ-480 User Manual

Safety Instructions

1. Read these safety instructions carefully.

2. Keep this User Manual for later reference.

3. Disconnect this equipment from any AC outlet before cleaning. Use a damp

cloth. Do not use liquid or spray detergents for cleaning.

4. For plug-in equipment, the power outlet socket must be located near the equip-

ment and must be easily accessible.

5. Keep this equipment away from humidity.

6. Put this equipment on a reliable surface during installation. Dropping it or letting

it fall may cause damage.

7. The openings on the enclosure are for air convection. Protect the equipment

from overheating. DO NOT COVER THE OPENINGS.

8. Make sure the voltage of the power source is correct before connecting the

equipment to the power outlet.

9. Position the power cord so that people cannot step on it. Do not place anything

over the power cord.

10. All cautions and warnings on the equipment should be noted.

11. If the equipment is not used for a long time, disconnect it from the power source

to avoid damage by transient overvoltage.

12. Never pour any liquid into an opening. This may cause fire or electrical shock.

13. Never open the equipment. For safety reasons, the equipment should be

opened only by qualified service personnel.

14. If one of the following situations arises, get the equipment checked by service

personnel:

–The power cord or plug is damaged.

–Liquid has penetrated into the equipment.

–The equipment has been exposed to moisture.

–The equipment does not work well, or you cannot get it to work according to

the user's manual.

–The equipment has been dropped and damaged.

–The equipment has obvious signs of breakage.

15. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT WHERE THE

STORAGE TEMPERATURE MAY GO BELOW -20° C (-4° F) OR ABOVE 60° C

(140° F). THIS COULD DAMAGE THE EQUIPMENT. THE EQUIPMENT

SHOULD BE IN A CONTROLLED ENVIRONMENT.

16. CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY

REPLACED. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE

RECOMMENDED BY THE MANUFACTURER, DISCARD USED BATTERIES

ACCORDING TO THE MANUFACTURER'S INSTRUCTIONS.

The sound pressure level at the operator's position according to IEC 704-1:1982 is

no more than 70 dB (A).

DISCLAIMER: This set of instructions is given according to IEC 704-1.Advantech dis-

claims all responsibility for the accuracy of any statements contained herein.

UbiQ-480 User Manual vi

vii UbiQ-480 User Manual

Contents

Chapter 1 Introduction..........................................1

1.1 Overview ................................................................................................... 2

Figure 1.1 Overview of the UBIQ-480.......................................... 3

1.2 System Configuration................................................................................ 3

Chapter 2 Hardware and Software Description..5

2.1 Product Features....................................................................................... 6

2.2 Mechanical Specifications......................................................................... 7

Figure 2.1 UbiQ-480 Dimensions ................................................ 7

Figure 2.2 Wall Box Dimensions.................................................. 8

Figure 2.3 Front View ................................................................ 11

Figure 2.4 Left View................................................................... 11

Figure 2.5 I/O Port View ............................................................ 11

2.3 Hardware and Software Specifications ................................................... 12

Table 2.1: Hardware .................................................................. 12

Chapter 3 Design Requirements........................13

3.1 Environmental Specifications .................................................................. 14

3.2 Reliability................................................................................................. 14

UbiQ-480 User Manual viii

Chapter 1

1Introduction

This chapter briefly introduces the

UbiQ-480 product.

UbiQ-480 User Manual 2

1.1 Overview

The UbiQ-480 residential terminal with Windows operating system built in offers

home appliance control, remote monitoring/security and home service functions. In

addition, the speed of the processor and the LAN-enabled architecture allow the

UBIQ-480 to function as an integrated home gateway. The UBIQ-480 is equipped

with an FreeScale i.MX31 523 MHz processor, a 7" touch screen display, onboard

Ethernet, and audio, serving as the key of a home/building security & automation

solution. It connects services and emergency call and sensor signals of an apartment

unit through the LAN to the administration center.

Congratulations on selecting the UbiQ-480 touch control PC, supported by Microsoft

Windows® CE. This unique touch control computer offers the convenience of highly

configurable features, and is designed for wall-mountable eHome/Building applica-

tions. The FreeScale i.MX 31 processor is mated with the Microsoft Windows® CE

operating system, delivering a high performance, reliable, fanless in-wall touch con-

trol computer system.

Microsoft WinCE® enable a user-friendly and attractive GUI interface that is ideal for

all eHome / eBuilding applications. A built-in FreeScale i.MX31 and a 7" 16:9 true

color TFT LCD together provide excellent graphical performance. The UbiQ-480 is

equipped with a built-in speaker and microphone that function as an intercom, either

through direct analog audio interface, or via LAN. The stylish design features and

smooth glazed finish of the UbiQ-480 makes it an elegant addition, easily mating with

any home or building environment. A variety of I/O interfaces are included for further

expansion, as well as easily-accessed and programmable hotkeys, which are all

available for easy peripheral integration.

The main features of the UbiQ-480 are:

!High performance platform with FreeScale i.MX31

!1.3M pixel CMOS camera

!Built-in Handset, microphone and speaker

!7" TFT LCD with touchscreen

!Six programmable function keys

!2 LAN ports

!Supports RS-485/RS-232, USB2.0, DI/DO

!PoE power (Power over Ethernet, optional)

!Various faceplates (by request)

!Supports VESA (75X75) standard

!Microsoft Windows® CE

!WiFi 802.11 b/g (optional)

!Advantech SUSI API manager is supported for easy SI development

Table des matières

Autres manuels Advantech Terminal tactile

Advantech

Advantech EP-55XX-AR10 Manuel utilisateur

Advantech

Advantech ADAM-3600-C2G Series Manuel utilisateur

Advantech

Advantech POC-S198 Manuel utilisateur

Advantech

Advantech TREK-723 Manuel utilisateur

Advantech

Advantech POC127 Manuel utilisateur

Advantech

Advantech EH-7104G Manuel utilisateur

Advantech

Advantech TREK-733L Manuel utilisateur

Advantech

Advantech TPC-1240 Manuel utilisateur

Advantech

Advantech POC-S155 Manuel utilisateur

Advantech

Advantech WebOP-3000 Series Manuel utilisateur

Advantech

Advantech HIT-W18 Series Manuel utilisateur

Advantech

Advantech MARS-1030F Manuel utilisateur

Advantech

Advantech POC-155 Manuel utilisateur

Advantech

Advantech WP-75**-**10/40 Manuel utilisateur

Advantech

Advantech TREK-725 Manuel utilisateur

Advantech

Advantech PWS 472 Manuel utilisateur

Advantech

Advantech PPC-V106 Manuel utilisateur

Advantech

Advantech POC-S196 Manuel utilisateur

Advantech

Advantech PPC-V106 Manuel utilisateur

Advantech

Advantech WP-5530-PD10 Manuel utilisateur

Advantech

Advantech UPOS-211 Manuel utilisateur

Advantech

Advantech HIT-W101C Manuel d'instructions

Advantech

Advantech ADAM-3968M/PMA Manuel d'installation et d'exploitation

Advantech

Advantech POC-W152 Manuel utilisateur

Manuels Terminal tactile populaires d'autres marques

Wincor Nixdorf

Wincor Nixdorf iPOS plus Advanced Manuel utilisateur

Ingenico

Ingenico AXIUM EX4000 Manuel utilisateur

Heisei Electronics

Heisei Electronics Q-POS 815 Manuel utilisateur

Amano

Amano MTX-15 Manuel utilisateur

FLOWBIRD

FLOWBIRD CWT Compact Touch Manuel utilisateur

Demco

Demco SP7 Manuel utilisateur

Lathem

Lathem PC600 Series Manuel utilisateur

Partner

Partner MF-2352 Manuel utilisateur

NCR

NCR RealPOS 7460-2 Manuel

Simrad

Simrad MS50 Instructions de montage

Unitech

Unitech MR350 MKII Guide de démarrage rapide

Jungheinrich

Jungheinrich WMT 210 Manuel utilisateur

Motorola

Motorola MTP850 Manuel utilisateur

YASKAWA

YASKAWA 62H-MDC0 Manuel utilisateur

MVG industries

MVG industries NeptuLink Manuel utilisateur

Price Industries Limited

Price Industries Limited FDC Manuel d'instructions

Honeywell

Honeywell TemaKey Manuel utilisateur

EBN

EBN BPC65-B-A16G Manuel utilisateur