Advantech MIC-3376 Manuel utilisateur

MIC-3376

6U-sized Pentium

III / II processor-

based CPU module for

CompactPCICompactPCI

CompactPCI ®®

®®

This document is copyrighted, 1999. All rights are reserved. The

original manufacturer reserves the right to make improvements to the

products described in this manual at any time without notice.

No part of this manual may be reproduced, copied, translated or

transmitted in any form or by any means without the prior written

permission of the original manufacturer. Information provided in this

manual is intended to be accurate and reliable. However, the original

manufacturer assumes no responsibility for its use, nor for any

infringements upon the rights of third parties which may result from its

use.

Acknowledgements

Award is a trademark of Award Software International, Inc.

Fast EtherChannel (FEC) is a trademark of Cisco Systems, Inc.

IBM, PS/2, OS/2, and VGA are trademarks of International Business

Machines Corporation.

Intel,Pentium,andPRO/100+aretrademarksofIntelCorporation.

Windows is a registered trademark of Microsoft Corporation.

NetWare is a trademark of Novell, Inc.

Symbios is a trademark of Symbios Logic Corporation.

PICMG™, CompactPCI™ and the PICMG™, and CompactPCI™ logos

are trademarks of the PCI Industrial Computers Manufacturers Group.

All other product names or trademarks are properties of their

respective owners.

CE Notification

The MIC-3376, developed by Advantech CO., LTD., has passed the

CE test for environment specification when shielded cables and the

LAN cables with cores are used for external wiring. We recommend

the use of shielded cables and LAN cables with cores.

Part No. 2003337610 2nd Edition

Printed in Taiwan July 1999

Product warranty

Advantech warrants to you, the original purchaser, that each of its

products will be free from defects in materials and workmanship for

one year from the date of purchase.

This warranty does not apply to any products which have been

repaired or altered by persons other than repair personnel authorized

by Advantech, or which have been subject to misuse, abuse, accident

or improper installation. Advantech assumes no liability under the

terms of this warranty as a consequence of such events.

Because of Advantech’s high quality-control standards and rigorous

testing, most of our customers never need to use our repair service. If

an Advantech product is defective, it will be repaired or replaced at no

charge during the warranty period. For out-of-warranty repairs, you

will be billed according to the cost of replacement materials, service

time and freight. Please consult your dealer for more details.

If you think you have a defective product, follow these steps:

1. Collect all the information about the problem encountered. (For

example, CPU speed, Advantech products used, other hardware

and software used, etc.) Note anything abnormal and list any on-

screen messages you get when the problem occurs.

2. Call your dealer and describe the problem. Please have your

manual, product, and any helpful information readily available.

3. If your product is diagnosed as defective, obtain an RMA (return

merchandize authorization) number from your dealer. This allows us

to process your return more quickly.

4. Carefully pack the defective product, a fully-completed Repair and

Replacement Order Card and a photocopy proof of purchase date

(such as your sales receipt) in a shippable container. A product

returned without proof of the purchase date is not eligible for

warranty service.

5. Write the RMA number visibly on the outside of the package and

ship it prepaid to your dealer.

Packing List

Before installing your board, ensure that the following materials have

been received:

• 1MIC-3376all-in-onesingleboardcomputer

• 1utilityCD-ROMdiscincludingEthernetutilityprograms,IDEutility

programs, SCSI utility programs, and SVGA utility programs and

drivers for Windows 3.1/95/98/NT and OS/2

• 1 heat sink, 1 bag of heat sink clips, 1 Y-type keyboard/mouse cable,

and1PS/2-DINcable.

• 1 warranty certificate

• This user's manual

If any of these items are missing or damaged, contact your distributor

or sales representative immediately.

Technical Support and Sales Assistance

If you have any technical questions about the MIC-3376 or any other

Advantech products, please visit our support website at:

•http://support.advantech.com.tw

For more information about Advantech's products and sales informa-

tion, please visit:

•http://www.advantech.com

Contents

1. Hardware Configuration......................................................... 1

1.1 Introduction .......................................................................................... 2

1.2Specifications........................................................................................ 3

1.2.1 Standard SBC functions ...........................................................................3

1.2.2 PCI-to-PCI Bridge ...................................................................................4

1.2.3 AGP VGA interface .................................................................................4

1.2.4 10/100Base-TX Ethernet Interface ..........................................................4

1.2.5 Ultra2 Wide SCSI Interface ......................................................................4

1.2.6 Mechanical and environmental specifications ..........................................5

1.3FunctionBlockDiagram........................................................................ 6

1.4 Board Layout: Dimensions ................................................................... 7

1.5 Jumpers, Switches and Connectors ...................................................... 8

1.6 Board Layout: Jumper/Switch Locations ............................................ 9

1.7 Board Layout: Connector Locations................................................... 10

1.8 Front Panel Connectors and Indicators .............................................. 11

1.9 Safety Precautions .............................................................................. 12

1.10 Jumper and Switch Settings .............................................................. 13

1.10.1 CPU clock ratio setting (1-3 of SW2) ..................................................14

1.10.2 JP1 Clear CMOS .................................................................................15

1.10.3 Master/slave selection of CompactFlash (4 of SW2) ..........................15

1.11InstallingSDRAM(DIMMs) ............................................................ 16

1.12 Installing CPU and heat sink ............................................................. 17

1.13 Software support............................................................................... 18

2. Connecting Peripherals....................................................... 19

2.1IDEDeviceandFloppyDrive ............................................................. 20

2.2CompactFlashInterface(CN12) .......................................................... 20

2.3VGADisplayConnector (CN3) ........................................................... 21

2.4ParallelPortConnector(CN1) ............................................................. 21

2.5 PS/2 Keyboard and Mouse Connector (CN6) ..................................... 21

2.6SerialPorts(CN2 and CN8) ................................................................. 21

2.7 CPU fan power supply connector (CN13) ........................................... 22

2.8EthernetConfiguration(CN4& CN5).................................................. 22

2.9USBConnector(CN7) ......................................................................... 22

2.10Ultra2Wide SCSIInterface(CN10).................................................... 23

2.11CardInstallation................................................................................ 23

3. Ethernet Software Configuration ......................................... 27

3.1 Introduction ........................................................................................ 28

3.2UtilityandDrivers............................................................................... 28

4. AGP SVGASetup ................................................................ 31

4.1 Introduction ........................................................................................ 32

4.2InstallationofSVGADriver ................................................................ 32

4.2.1 Installation for Windows 3.1 .................................................................33

4.2.2 Installation for Windows 95 ..................................................................35

4.2.3 Installation for Windows 98 ..................................................................35

4.2.3 Installation for Windows NT .................................................................36

5. SCSI Software Configuration.............................................. 39

5.1 Introduction ........................................................................................ 40

5.2 Utility User's Guide and Installation Instructions ............................... 40

5.3 Building Driver Diskettes .................................................................... 42

5.4DriverandUtilityInstallation.............................................................. 43

6. Award BIOS Setup .............................................................. 45

6.1AWARDBIOSSetup .......................................................................... 46

6.1.1 Entering setup ........................................................................................46

6.1.2 Standard CMOS setup ...........................................................................47

6.1.3 BIOS features setup ...............................................................................48

6.1.4 CHIPSET features setup .......................................................................52

6.1.5 Power management setup ......................................................................53

6.1.6 PCI configuration setup .........................................................................54

6.1.7 Load BIOS defaults ................................................................................54

6.1.8 Load setup defaults ................................................................................54

6.1.9 Integrated Peripherals ............................................................................55

6.1.10 Password setting ..................................................................................55

6.1.11 IDE HDD auto detection .....................................................................55

6.1.12 Save & exit setup .................................................................................56

6.1.13 Exit without saving ..............................................................................56

A. Programming the Watchdog Timer..................................... 57

A.1 Programming the Watchdog Timer .................................................... 58

Figures

Figure1-1: MIC-3376function blockdiagram ........................................6

Figure1-2: MIC-3376 boardlayout: Dimensions ...................................7

Figure1-3: MIC-3376board layout:Jumper locations ...........................9

Figure1-4: MIC-3376 boardlayout: Connectorlocations.....................10

Figure1-5: MIC-3376Front panelconnectorandindicator locations ... 11

Figure1-6: Installing a CPU with a heat sink ......................................17

Figure1-7: Installing a CPU into the slot 1 socket..............................18

Figure2-1: Installing the card into the chassis ...................................24

Figure6-1: Setupprogram initial screen .............................................46

Figure6-2: CMOS setup screen.........................................................47

Figure6-3: BIOSfeatures setup screen..............................................48

Figure6-4: CHIPSETfeatures setupscreen .......................................52

Figure6-5: Power managementsetup screen ....................................53

Figure6-6: PCI configurationscreen...................................................54

Figure6-7: Integratedperipherals .......................................................55

B. Pin Assignments................................................................. 61

B.1VGADisplayConnector (CN3)........................................................... 62

B.2COM1RS-232SerialPort (CN2).......................................................... 62

B.3COM2RS-232SerialPort (CN8).......................................................... 63

B.4 Keyboard and Mouse Connnector (CN6) .......................................... 63

B.5USBConnector(CN7) ........................................................................ 64

B.6 CPUFan PowerConnector(CN13) ..................................................... 64

B.7EthernetRJ-45Connector1 (CN4)...................................................... 65

B.8EthernetRJ-45Connector2 (CN5)...................................................... 65

B.9ParallelPortConnector(CN1)............................................................. 66

B.10InternalPCIConnector(CN9) ........................................................... 67

B.11Ultra2SCSI Connector(CN10).......................................................... 68

B.12CompactFlashSocket(CN12) ........................................................... 70

B.13 System I/O Ports............................................................................... 71

B.14 Interrupt Assignments ..................................................................... 73

B.15 1st MB Memory Map ....................................................................... 73

B.16 J1/J4 connector pin assignments...................................................... 73

B.17 J2/J5 connector pin assignments...................................................... 74

B.18 J3 connector pin assignments .......................................................... 75

Tables

Table 1-1: MIC-3376jumpers andconnectors ....................................8

Table 1-2: CPU clock ratio setting....................................................16

Table 1-3: Master/slaveselection ofCompactFlash..........................17

Table 2-1: MIC-3376serial portdefaultsettings................................22

Table B-2: MIC-3376COM1RS-232serialport.................................62

Table B-3: MIC-3376COM2RS-232serialport.................................63

Table B-4: MIC-3376keyboardconnector .........................................63

Table B-5: USB1/USB2connector....................................................64

Table B-6: MIC-3376CPUfanpowerconnector ................................64

Table B-7: MIC-3376EthernetRJ-45connector1 .............................65

Table B-8: MIC-3376EthernetRJ-45connector2 .............................65

Table B-9: MIC-3376parallelportconnector .....................................66

Table B-10: MIC-3376internal PCIconnector .....................................67

Table B-11: MIC-3376Ultra2SCSIconnector .....................................68

Table B-12: MIC-3376CompactFlash socket......................................70

Table B-13: System I/O ports.............................................................71

Table B-14: Interruptassignments ......................................................73

Table B-15: 1st MB memory map.......................................................73

Table B-16: J1/J4connectorpin assignments.....................................73

Table B-17: J2/J5connectorpin assignments.....................................74

Table B-18: J3 connectorpin assignments .........................................75

Hardware

Configuration

CHAPTER

2MIC-3376 User's Manual

1.1 Introduction

The MIC-3376 is a 6U-sized CompactPCI®

all-in-one single board

Pentium®

III/IICPUcardwhich complies with PICMG 2.0R2.1Com-

pactPCI specifications. The MIC-3376 offers powerful functions on a

single board for performance-demanding applications like computer

telephony and communications.

The MIC-3376 offers a slot 1 socket and accepts an Intel Pentium®

III/II

CPU to provide optimum computing power. Two PCI-to-PCI bridges

allow MIC-3376 to drive two independent CompactPCI bus segments

through J1/J2 and J4/J5 connectors.

On-board features include dual 100/10 Mbps fast Ethernet interfaces,

one 80 MB/s Ultra2 SCSI interface and one AGP VGA interface. The

built-in high speed PCI IDE controller supports both PIO and bus

master modes. Through the J3 connector on MIC-3376, two IDE

channels and one floppy drive interface are available on the transition

board or backplane. The on-board CompactFlash®

socket accepts one

solid state memory card for diskless operation. The MIC-3376 also

supports standard serial and parallel ports, such as two USB ports,

twoRS-232ports,andonemulti-modeparallel (ECP/EPP/SPP) port.

A backup of the CMOS data is stored in the flash memory, which

protects the BIOS configuration even after a battery failure. Also

included is a 63-level watchdog timer, which resets the CPU or

generates an interrupt if a program cannot be executed normally. This

enables reliable operation in unattended environments.

The MIC-3376 is available in four versions:

• MIC-3376:6UCompactPCIPentium III/II CPUboardwithsinglePCI-

to-PCI bridge

• MIC-3376S:6UCompactPCIPentium III/II CPU boardwithsingle

PCI-to-PCIbridgeandUltra2SCSIinterface

• MIC-3376D:6UCompactPCIPentium III/II CPUboardwithdualPCI-

to-PCI bridges

• MIC-3376F:6UCompactPCIPentium III/II CPUboardwithdualPCI-

to-PCI bridges and Ultra2 SCSI interface

Table des matières

Autres manuels Advantech Unité de contrôle

Advantech

Advantech PCM-3643 Manuel d'installation et d'exploitation

Advantech

Advantech MIC-75G30 Manuel d'installation et d'exploitation

Advantech

Advantech RISC SOM-A2558 Series Manuel utilisateur

Advantech

Advantech AMAX-4800 Series Manuel utilisateur

Advantech

Advantech ADAM-5240 Manuel utilisateur

Advantech

Advantech MOS-2110Z-1201E Manuel utilisateur

Advantech

Advantech EH-8100 Manuel utilisateur

Advantech

Advantech WISE-1510 Manuel utilisateur

Advantech

Advantech SOM-7569 Manuel utilisateur

Advantech

Advantech SOM-5897 Manuel utilisateur

Advantech

Advantech ASMB-BMC Manuel d'installation et d'exploitation

Advantech

Advantech MIO-6254 Manuel d'installation et d'exploitation

Advantech

Advantech AMAX-175 Series Manuel utilisateur

Advantech

Advantech PCM-3345 Manuel utilisateur

Advantech

Advantech PCM-23C1CF Manuel utilisateur

Advantech

Advantech IPMI-1000 Manuel d'installation et d'exploitation

Advantech

Advantech MOS-1120Y-0201E Manuel utilisateur

Advantech

Advantech ADAM-3750 3-Wire Series Manuel d'installation et d'exploitation

Advantech

Advantech PCM-3117 Manuel d'installation et d'exploitation

Advantech

Advantech IPMI-1000 Manuel d'installation et d'exploitation

Advantech

Advantech APAX-5202P Manuel utilisateur

Advantech

Advantech WISE-4610 Series Manuel d'installation et d'exploitation

Advantech

Advantech ADAM-2510Z Manuel utilisateur

Advantech

Advantech PCM-3110 Manuel utilisateur

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur