Advantech Network Device USB-4761 Manuel d'installation et d'exploitation

1 Startup Manual

STARTUP MANUAL

USB-4761

8-ch Relay, 8-ch IDI USB Module

Before installation, please make sure that you have

received the following:

• USB-4761 Module with DIN-rail mounting kit

• Shielded USB 2.0 Cable (1.8 m)

• Companion CD-ROM (DLL driver included)

• Startup Manual

If anything is missing or damaged, contact your dis-

tributor or sales representative immediately.

User Manual

For more detailed information on this product, please

refer to the USB-4761 User Manual on the CD-ROM

(PDF format). CD:\Documents\Hardware Manu-

als\USB\USB-4761.

FCC Class A

This equipment has been tested and found to comply with

the limits for a Class A digital device, pursuant to part 15 of

the FCC Rules. These limits are designed to provide reason-

able protection against harmful interference when the equip-

ment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residen-

tial area is likely to cause interference in which case the user

is required to correct interference at his own expense.

This product has passed the CE test for environmental speci-

fications when shielded cables are used for external wiring.

We recommend the use of shielded cables. This kind of cable

is available from Advantech. Please contact your local sup-

plier for ordering information.

The Advantech USB-4761 is a powerful data acquisition

(DAS) module for the USB port. It features a unique circuit

design and complete functions for data acquisition and con-

trol.

1. Touch the metal part on the surface of your

computer to neutralize the static electricity that

might be in your body.

2. Plug your USB module into the selected USB port.

Hold the module only by its edges. Plug the mod-

ule firmly into place. Use of excessive force must

be avoided; otherwise the module might get dam-

aged.

Packing List Software Installation

Declaration of Conformity

Overview

Notes

For more information on this and other Advantech prod-

ucts, please visit our websites at:

http://www.advantech.com/eAutomation

For technical support and service:

http://www.advantech.com/support/

This startup manual is for USB-4761

Part No.2003476111 2nd Edition

March 2011

Hardware Installation

2 Startup Manual

Pin Assignments

The USB Module is equipped with an LED indicator to

show the current status of the device. When you plug

the USB device into the USB port, the LED indicator

will blink five times and then stay lit to indicate that it is

on. Please refer to the following table for detailed LED

indicator status information

Single-ended Channel Connections

USB-4761 has 8 isolated digital input channels. Each of

isolated digital input channel accepts 10~30 VDC volt-

age inputs, and accept bi-directional input. It means that

you can apply positive or negative voltage to an isolated

input pin (Vin ). The figure below shows how to con-

nect an external input source to one of the card's iso-

lated input channels.

After power on, the initial relay output status is shown

as below:

Pin Assignments LED Definitions

Isolated Digital Input Connections

Relay Connections

Autres manuels pour Network Device USB-4761

Autres manuels Advantech Unité de contrôle

Advantech

Advantech iDAQ-815 Manuel utilisateur

Advantech

Advantech MIC-75G30 Manuel d'installation et d'exploitation

Advantech

Advantech ROM-7510 Manuel utilisateur

Advantech

Advantech SOM 144 Mode d’emploi

Advantech

Advantech USB-5801 Manuel d'installation et d'exploitation

Advantech

Advantech ADAM-6217 Manuel utilisateur

Advantech

Advantech MIO-3121 Manuel d'installation et d'exploitation

Advantech

Advantech WISE-1510 Manuel utilisateur

Advantech

Advantech PCM-3116 Manuel d'installation et d'exploitation

Advantech

Advantech SOM-5780 Mode d’emploi

Advantech

Advantech IPMI-1000 Manuel d'installation et d'exploitation

Advantech

Advantech PCM-3618 Manuel utilisateur

Advantech

Advantech SOM-5892 Manuel utilisateur

Advantech

Advantech IPMI-2000 Manuel d'installation et d'exploitation

Advantech

Advantech PCA-TPMSPI Manuel d'installation et d'exploitation

Advantech

Advantech Network Device USB-4761 Manuel d'installation et d'exploitation

Advantech

Advantech PCM-3110 Manuel utilisateur

Advantech

Advantech PCM-3531 Manuel d'installation et d'exploitation

Advantech

Advantech ADAM-2510Z Manuel utilisateur

Advantech

Advantech USB-4716 Manuel utilisateur

Advantech

Advantech PCM-233A Manuel d'installation et d'exploitation

Advantech

Advantech SOM-6898 Manuel utilisateur

Advantech

Advantech SOM-5894 Manuel utilisateur

Advantech

Advantech ADAM-3656 Manuel d'installation et d'exploitation

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur