Advantech PPC-IPS Manuel utilisateur

User Manual

PPC-IPS

Intelligent Power System for PCs

PPC-IPS User Manual ii

The documentation and the software included with this product are copyrighted 2021

by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right

to improve the products described in this manual at any time without notice. No part

of this manual may be reproduced, copied, translated, or transmitted in any form or

by any means without the prior written permission of Advantech Co., Ltd. The infor-

mation provided in this manual is intended to be accurate and reliable. However,

Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringements

of the rights of third parties that may result from its use.

Acknowledgments

Intel and Pentium are trademarks of Intel Corporation.

Microsoft Windows is registered trademark of Microsoft Corp.

All other product names or trademarks are properties of their respective owners.

Product Warranty (2 years)

Advantech warrants the original purchaser that each of its products will be free from

defects in materials and workmanship for two years from the date of purchase.

This warranty does not apply to any products that have been repaired or altered by

persons other than repair personnel authorized by Advantech, or products that have

been subject to misuse, abuse, accident, or improper installation. Advantech

assumes no liability under the terms of this warranty as a consequence of such

events.

Because of Advantech’s high quality-control standards and rigorous testing, most

customers never need to use our repair service. If an Advantech product is defective,

it will be repaired or replaced free of charge during the warranty period. For out-of-

warranty repairs, customers will be billed according to the cost of replacement mate-

rials, service time, and freight. Please consult your dealer for more details.

If you believe your product to be defective, follow the steps outlined below.

1. Collect all the information about the problem encountered. (For example, CPU

speed, Advantech products used, other hardware and software used, etc.) Note

anything abnormal and list any onscreen messages displayed when the prob-

lem occurs.

2. Call your dealer and describe the problem. Please have your manual, product,

and any helpful information readily available.

3. If your product is diagnosed as defective, obtain a return merchandise authori-

zation (RMA) number from your dealer. This allows us to process your return

more quickly.

4. Carefully pack the defective product, a completed Repair and Replacement

Order Card, and a proof of purchase date (such as a photocopy of your sales

receipt) into a shippable container. Products returned without a proof of pur-

chase date are not eligible for warranty service.

5. Write the RMA number clearly on the outside of the package and ship the pack-

age prepaid to your dealer.

Part No. 200K0IPS11 Edition 2

Printed in China July 2021

iii PPC-IPS User Manual

Declaration of Conformity

This product has passed the CE test for environmental specifications when shielded

cables are used for external wiring. We recommend the use of shielded cables. This

type of cable is available from Advantech. Contact your local supplier for ordering

information.

Test conditions for passing also include the equipment being operated within an

industrial enclosure. In order to protect the product from damage due to electrostatic

discharge (ESD) and EMI leakage, we strongly recommend the use of CE-compliant

industrial enclosure products.

FCC Class A

This equipment has been tested and found to comply with the limits for a Class A dig-

ital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-

vide reasonable protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio communications. Opera-

tion of this equipment in a residential area is likely to cause harmful interference. In

this event, users are required to correct the interference at their own expense.

Technical Support and Assistance

1. Visit the Advantech website at www.advantech.com/support to obtain the latest

product information.

2. Contact your distributor, sales representative, or Advantech's customer service

center for technical support if you need additional assistance. Please have the

following information ready before calling:

–Product name and serial number

–Description of your peripheral attachments

–Description of your software (operating system, version, application software,

etc.)

–A complete description of the problem

–The exact wording of any error messages

PPC-IPS User Manual iv

Safety Instructions

1. Read these safety instructions carefully.

2. Retain this user manual for future reference.

3. Disconnect the equipment from all power outlets before cleaning. Use only a

damp cloth for cleaning. Do not use liquid or spray detergents.

4. For pluggable equipment, the power outlet socket must be located near the

equipment and easily accessible.

5. Protect the equipment from humidity.

6. Place the equipment on a reliable surface during installation. Dropping or letting

the equipment fall may cause damage.

7. The openings on the enclosure are for air convection. Protect the equipment

from overheating. Do not cover the openings.

8. Ensure that the voltage of the power source is correct before connecting the

equipment to a power outlet.

9. Position the power cord away from high-traffic areas. Do not place anything over

the power cord.

10. All cautions and warnings on the equipment should be noted.

11. If the equipment is not used for a long time, disconnect it from the power source

to avoid damage from transient overvoltage.

12. Never pour liquid into an opening. This may cause fire or electrical shock.

13. Never open the equipment. For safety reasons, the equipment should be

opened only by qualified service personnel.

14. If any of the following occurs, have the equipment checked by qualified service

personnel:

–The power cord or plug is damaged.

–Liquid has penetrated the equipment.

–The equipment has been exposed to moisture.

–The equipment is malfunctioning, or does not operate according to the user

manual.

–The equipment has been dropped and damaged.

–The equipment shows obvious signs of breakage.

15. Do not leave the equipment in an environment with a storage temperature of

below -20 °C (-4 °F) or above 50 °C (122 °F) as this may damage the compo-

nents. The equipment should be kept in a controlled environment.

16. CAUTION: Batteries are at risk of exploding if incorrectly replaced. Replace only

with the same of equivalent type as recommended by the manufacturer. Discard

used batteries according to the manufacturer’s instructions.

17. ATTENTION: Danger d'explosion si la batterie est inexactement remplacée.

Remplacez seulement avec la même chose ou le type équivalent recommandé

par le fabricant. Jettent les batteries utilisées instructions de s selon fabricant

des.

18. In accordance with IEC 704-1:1982 specifications, the sound pressure level at

the operator’s position does not exceed 70 dB (A).

19. 이 기기는 업무용 환경에서 사용할 목적으로 적합성평가를 받은 기기로서 가정용

환경에서 사용하는 경우 전파간섭의 우려가 있습니다.

20. The power outlet socket should have a ground connection.

DISCLAIMER: These instructions are provided according to IEC 704-1 standards.

Advantech disclaims all responsibility for the accuracy of any statements contained

herein.

v PPC-IPS User Manual

Safety Precautions - Static Electricity

Follow these simple precautions to protect yourself from harm and the products from

damage.

To avoid electrical shock, always disconnect the power from the PC chassis

before manual handling. Do not touch any components on the CPU card or

other cards while the PC is powered on.

Disconnect the power before making any configuration changes. A sudden rush

of power after connecting a jumper or installing a card may damage sensitive

electronic components.

Battery Information

Batteries, battery packs, and accumulators should not be disposed of as unsorted

household waste. Please use the public collection system to return, recycle, or treat

them in compliance with local regulations.

Do not replace the battery with a substandard battery of incorrect type (i.e.,

some lithium battery types) (用不合格的電池替換可能會破壞安全的電池)

Do not attempt to dispose of the battery by throwing it into a fire or hot oven, or

by crushing or cutting it open as this can cause an explosion (將電池投入火中或

熱烤箱中，或將其機械破碎或切割，可能導致爆炸)

Leaving the battery in environments with extremely high temperatures can

cause an explosion or leakage of flammable liquid or gas (將電池放置在極端高

溫的環境中，可能導致爆炸或易燃液體或氣體洩漏)

PPC-IPS User Manual vi

vii PPC-IPS User Manual

Contents

Chapter 1 General Information ............................1

1.1 Introduction ............................................................................................... 2

1.2 Specifications............................................................................................ 2

1.3 Dimensions ............................................................................................... 3

Figure 1.1 PPC-IPS with Baseboard ........................................... 3

Figure 1.2 PPC-IPS without Baseboard ...................................... 3

Figure 1.3 Installation via DIN-Rail Mount ................................... 4

Figure 1.4 DIN-Rail Bracket Dimensions ..................................... 4

Chapter 2 Installation Instructions ......................5

2.1 Introduction ............................................................................................... 6

2.2 Dual Auto-Shutdown Modes ..................................................................... 7

2.3 System I/O ................................................................................................ 9

Figure 2.1 PPC-IPS Module Overview ........................................ 9

Figure 2.2 I/O Layout ................................................................... 9

2.4 Installation Procedures............................................................................ 10

2.4.1 VESA Mount Installation ............................................................. 10

Figure 2.3 VESA Mount Diagram .............................................. 10

2.4.2 DIN-Rail Installation .................................................................... 11

Figure 2.4 DIN Rail Mounting .................................................... 11

Figure 2.5 Mounting the DIN-Rail Bracket ................................. 11

2.4.3 Power and Control Cable Installation.......................................... 12

Figure 2.6 Power Cable ............................................................. 12

Figure 2.7 Connecting the Power Cable and Adapter ............... 12

Figure 2.8 Positive and Negative Poles..................................... 13

Figure 2.9 Assembled Power Cable and Adapter...................... 13

Figure 2.10Control Cable............................................................ 14

Figure 2.11COM Port Cable ....................................................... 14

Figure 2.12Screw Locations ....................................................... 15

Figure 2.13Punch Hole Location ................................................ 15

Figure 2.14Route Cable Through Punch Hole............................ 16

Figure 2.15Installed Power Cable............................................... 16

Figure 2.16Connected cables..................................................... 17

Figure 2.17RS-232 Cable ........................................................... 17

Figure 2.18Separated Cable....................................................... 18

Figure 2.19Connected Power and Control Cables ..................... 18

2.4.4 Module Installation ...................................................................... 19

Figure 2.20Module Screw Locations .......................................... 19

Figure 2.21Module Baseboard ................................................... 19

Figure 2.22Baseboard Screw Location....................................... 20

Figure 2.23PPC-IPS Module at Rear.......................................... 20

2.4.5 Replace the IPS Battery.............................................................. 21

Figure 2.24Top Cover Screw Locations ..................................... 21

Figure 2.25Open Power Connector ............................................ 21

Chapter 3 IPS Settings........................................23

3.1 I/O Connector Specifications................................................................... 23

3.2 PS_ON Shutdown Mode......................................................................... 25

PPC-IPS User Manual viii

Chapter 4 PPC-IPS-AE Adjustment Tool .......... 29

4.1 Notice of Use .......................................................................................... 30

4.1.1 PC Support ................................................................................. 30

4.2 UI Introduction - Basic............................................................................. 30

4.2.1 Select COM Port......................................................................... 30

4.2.2 Power State Selection (S4 or S5) ............................................... 30

4.2.3 Status Indicators ......................................................................... 31

4.2.4 Final Countdown for Shutdown................................................... 31

4.2.5 Operating Temperature for Battery Pack.................................... 31

4.2.6 Maximum Time to Turn Off ......................................................... 31

4.2.7 Automatic Run ............................................................................ 31

4.3 UI Introduction - Advanced ..................................................................... 32

4.3.1 Time to Shutdown after Power Outage....................................... 32

4.3.2 Maximum Time to Shutdown after Power Outage ...................... 32

4.3.3 Time to Turn-Off IPS after Shutdown Command........................ 32

Chapter 1

1General Information

Introduction

Specifications

Dimensions

PPC-IPS User Manual 2

1.1 Introduction

The PPC-IPS module is a lightweight intelligent power management system

designed to protect panel PCs from electrical damage. During power interruptions/

fluctuations, the module can serve as a temporary power source to ensure safe shut-

downs and reduce the risk of data losses. Moreover, the module can be easily

installed on a DIN rail or affixed to the rear of a panel PC for easy deployment.

1.2 Specifications

This product is intended to be supplied by a listed power adapter or DC power source

rated 12 ~ 30VDC, 8.5 ~ 3.5A minimum, with a TMA of 50 °C/122 °F. Should you

require further assistance with selecting an appropriate power source, please contact

your local Advantech representative.

Input

Input Voltage 12 ~ 30 VDC

Input Power Rating 8.5 ~ 3.5 A

Charging Current 2 A

Output

Output Voltage 24 VDC

Output Current 2.5 A max.

Battery

Battery Capacity 14.4 VDC, 1950mAH

Lifecycle 300 recharge cycles (above 60% capacity com-

pared to the initial state)

Protections

Short-Circuit Protection Yes

Over-Discharge Protection IPS shuts down at 5% battery capacity (default)

Certification

EMC CE, FCC, CCC, BSMI

Safety UL, CB, CCC, BSMI

Dimensions 151.8 x 125 x 37.2 mm/5.98 x 4.92 x 1.46 in

Environment

Operating Temperature

0 ~ 50 °C/32 ~ 122 °F (with DIN rail mount)

0 ~ 45 °C/32 ~113 °F (with VESA mount)

Storage Temperature -20 ~ 50 °C/-4 ~ 122 °F

Autres manuels pour PPC-IPS

Table des matières

Autres manuels Advantech Matériel informatique

Advantech

Advantech SOM-C350 Manuel utilisateur

Advantech

Advantech AIMC-3422 Manuel d'installation et d'exploitation

Advantech

Advantech PCLD-8751 Manuel utilisateur

Advantech

Advantech ARK-1380 Manuel utilisateur

Advantech

Advantech HPC-8000 Manuel utilisateur

Advantech

Advantech AdvLinuxTU Manuel utilisateur

Advantech

Advantech ACP-2020G Manuel utilisateur

Advantech

Advantech MIO-5270 Manuel d'installation et d'exploitation

Advantech

Advantech EPD-332 Manuel utilisateur

Advantech

Advantech MIC-75M20 Manuel d'installation et d'exploitation

Advantech

Advantech FWA-3033-00A1R Manuel d'installation et d'exploitation

Advantech

Advantech SOM-6897 Manuel utilisateur

Advantech

Advantech PCA-6654 Manuel utilisateur

Advantech

Advantech PCM-3643 Manuel utilisateur

Advantech

Advantech PCA-6742 Series Manuel d'installation et d'exploitation

Advantech

Advantech ASMB-588 Manuel d'installation et d'exploitation

Advantech

Advantech PCI-6870 Series Manuel utilisateur

Advantech

Advantech EPD-660 Manuel utilisateur

Advantech

Advantech PCA-6119P7 Manuel d'installation et d'exploitation

Advantech

Advantech MIC-715 Manuel utilisateur

Advantech

Advantech ECU-479 Series Manuel utilisateur

Advantech

Advantech MIO-2263 Manuel d'installation et d'exploitation

Advantech

Advantech UNO-238 V2 Manuel d'installation et d'exploitation

Advantech

Advantech PCE-7B13-0AA1 Manuel d'installation et d'exploitation

Manuels Matériel informatique populaires d'autres marques

EMC2

EMC2 VNX Series Manuel du propriétaire

Panasonic

Panasonic DV0PM20105 Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuel utilisateur

Raidon

Raidon iT2300 Manuel utilisateur

National Instruments

National Instruments PXI-8186 Manuel utilisateur

Hauppauge

Hauppauge WinTV-HVR-2250 Manuel utilisateur

Kontron

Kontron CP6002 Manuel utilisateur

Manhattan

Manhattan 702843 Manuel utilisateur

Aphex

Aphex 230 Manuel utilisateur

AMD

AMD Phenom II Manuel d'exploitation

Intel

Intel NUC 12 Pro Manuel utilisateur

dbx

dbx Zone Pro 1260 Manuel utilisateur

Galaxy

Galaxy GHDX2-2430S-24F4D Manuel utilisateur

Intel

Intel AXXRMFBU4 Manuel utilisateur

Kontron

Kontron DIMM-PC/MD Manuel utilisateur

ST X-NUCLEO-SAFEA1B Mode d'emploi

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuel utilisateur