Advantech FWA-3270A Manuel d'installation et d'exploitation

FWA-3270 Startup Manual 1

Before you begin installing your card, please make sure

that the following items have been shipped:

• 1 x FWA-3270 Internet Security Platform

• 1 x Accessory Box

• 1 x Warranty Card

If any of these items are missing or damaged, please con-

tact your distributor or sales representative immediately.

Note 1: Acrobat Reader is required to view any PDF

ﬁle.Acrobat Reader can be downloaded at:

www.adobe.com/Products/acrobat/readstep2.

html (Acrobat is a trademark of Adobe)

Express Modules

• ExpressModule:Supports 4/8-port RJ-45 GE, 2-port SFP

GE, 2-port SFP 10GE, 4-port SFP GE and 4-port SFP

10GE

For a complete list of NMC support, please contact

Advantech.

• Dimensions(WxD):

72 x 172 mm

FWA-3270A/B 1RU Network Application Platform

with x86 Based Intel® Xeon™ E3 Series and Gen

6 Core™ i7/i5/i3 Processor

Startup Manual

Main Board Functions

• CPU:Intel®Xeon E3-1275/E3-1225/E3-1268LV5, Gen

6 Intel® Core™ i7-6700/i7-6700TE/i5-6500/i5-6500TE/

i3-6100/i3-6100TE, Intel® Pentium® processor G4400/

G4400TE, Intel® Celeron® G3900/G3900TE processor

• Chipset:Intel® C236/H110

• Memory:Supports dual channel DDR4 2133 MHz ECC

(only for Xeon® processor) or Non-ECC memory, up to

64 GB

• PCI-eBus:1xPCIe x8 gen.3, 2xPCIe x4 gen.2 for FH/HL

PCI-e card

• Network:

- NMC Module: 2 x NMC modules, support up to PCI-e

x8 gen.3 NMC module

- Management Interface: 2 x Intel I210-AT Gigabyte

Ethernet ports

• MassStorage:1 x 3.5 or 2 x 2.5”internal SATA HDD/SSD,

1 x mSATA/M.2 SSD, with transmission speed up to 6

GB/S

• Pripherials:

- LCD Module: 32 x 128 screen, with 5 buttons

- Console: 1 x RJ45 Console interface

- USB: 2 x USB3.0 connectors

- LAN: Supports up to 8 on-board Intel i210-AT

10/100/1000 Ethernet ports

- TPM: TPM2.0 (Inﬁneon_SLB9635TT)

• IPMI:Optional

• PowerSupply:300 W, 3Y AC and DC redundent power

supply, 250W AC single power supply

• Dimensions(WxHxD):

430 x 44 x 550 mm / 430 x 44 x 375 mm

• Weight:10 KG

• Environment:Operating Non-operating

• Temperature:0 ~ 40°C -20 ~ 60°C

(32 ~ 104°F) (-4 ~ 140°F)

• Humidity:5 ~ 85% @ 40°C, 5 ~ 95% @ 40°C

SpecicationsPacking List

For more information on this and other Advantech

products, please visit our website at:

http://www.advantech.com

For technical support and service, please visit our

support website at:

http://support.advantech.com

This manual is for the FWA-3270 Series.

Part No. 2002327010

Print in Taiwan

1st Edition

July 2016

2 FWA-3270 Startup Manual

Installation Installation (Cont.)

Unpack the box and take FWA-3270 out of it. Unfasten the

screws indicated with the red arrows in the below ﬁgure,

then remove the top cover. (Left one is FWA-3270A, while

the right one is FWA-3270B)

Front

前部

Rear

前部

Installing CPU

1. Press the holding clamp to take out the dust shield.

2. Place the CPU onto the four footstands. Note that the

fool-proof connectors of CPU and the triangle mark

should align with CPU footstands.

3. Press the holding clamp to ensure the CPU is hooked

ﬁrmly.

Installing Heatsink and Fan Cover

1. Take the heatsink, the fan cover and four screws out of

accessory box. Follow the below ﬁgures to ﬁx the fan

cover and the heatsink.

2. Firstly, ﬁx the heatsink onto the CPU bracket with four

screws. Then, use two screws in the accessory box to

ﬁx the fan cover.

Installing Memory

1. Insert the memory into DIMM slot and make sure it is

placed properly.

FWA-3270 Startup Manual 3

Installation (Cont.) Installation (Cont.)

Installing PCI-E Card

Note:

PCI-E card is applicable only to FWA-3270A

standard version. Since it can not be used with

3.5” HDD at the same time, please choose HDD

carefully when both are needed. PCI-E device

in the following ﬁgures is shown as a reference,

and the installation procedures may vary for dif-

ferent devices. If FWA-3270A and PCI-E card are

not used, please ignore this section.

1. Unfasten the four screws indicated with the red arrows

to remove the HDD bracket.

2. Unfasten the four screws indicated with the red arrows

to remove the plate modules.

3. Release the screw on the plate module for future use,

then remove the plate.

4. Get a PCI-E card (here a network card is taken as an

example). Install the PCI-E card onto the bracket and

ﬁx it with the screw removed in the previous step.

5. Insert the network card module into PCI-E slot and ﬁx

the bracket with four screws to the position indicated

with the red arrows in the below.

Installing 3.5” HDD

1. Release the screws and remove the 3.5” HDD bracket.

This bracket is in the rear side for FWA-3270A (left

ﬁgure) and in the front for FWA-3270B (right ﬁure).

2. Install the 3.5” HDD on the bracket with six screws in

the accessory box.

4 FWA-3270 Startup Manual

Installation (Cont.)Installation (Cont.)

3. According to the selected model, follow the different

procedures below to install the 3.5” HDD.

FWA-3270A:

a. Release two screws indicated with the red arrows in

the below.

b. Move the fan bracket to the left and lift the bracket a

little bit. Get the SATA cable (in accessory box) across

the fan bracket.

c. Connect the SATA and power cables to the HDD.

d. Fix the HDD bracket with four screws to the position

indicated with the red arrows, and then connect the

other end of the SATA cable to the main board.

FWA-3270B:

a. Fix the HDD bracket with four screws to the position

indicated with the red arrows.

b. Get the SATA cable from the accessory box. Refer to

the below ﬁgure to connect the SATA and power

cables to the HDD and arange them properly.

Installing 2.5”HDD

According to the selected model, follow the different proce-

dures below to install the 2.5” HDD.

FWA-3270A:

a. Release the screws and remove the 2.5” HDD bracket.

FWA-3270 Startup Manual 5

b. Take eight shockproof washers from the accessory

box and place them onto the HDD bracket as shown

in the below.

c. Take eight screws from the accessory box and ﬁx the

2.5” HDD onto the bracket as shown in the below.

Use the removed screws in the previous step to ﬁx the

HDD bracket into the chssis.

e. Get two SATA cables from the accessory box. Refer

to the below ﬁgure to connect the SATA and power

cables to the HDD and arange them properly.

FWA-3270B:

Release the screws and remove the 2.5” HDD bracket.

b. Take eight shockproof washers from the accessory

box and place them onto the HDD bracket as

shown in the below.

c. Take eight screws from the accessory box and ﬁx the

2.5” HDD onto the bracket as shown in the below.

d. Take eight screws from the accessory box and ﬁx the

2.5” HDD onto the bracket as shown in the below.

Installation (Cont.) Installation (Cont.)

6 FWA-3270 Startup Manual

2. Take one screw from the accessory box and insert it

into the maked position.

3. Fasten the screw onto the main board.

Installing NMC Card

1. Remove the blank plates in the direction as shown in

the below.

e. Get the SATA cable from the accessory box. Refer to

the below ﬁgure to connect the SATA and power

cables to the HDD and arange them properly.

Installing mSATA

1. Take one mSATA (only supports half-size) and push it

into DIMM slot in the direction as shown in the below.

全长

半长

2. Take one Nylok screw from the accessory box and

insert it into the position marked with a red arrow to ﬁx

mSATA onto the main board.

Installing M.2 SSD

1. Push the M.2 into the slot in the direction as shown in

the below.

Installation (Cont.)Installation (Cont.)

FWA-3270 Startup Manual 7

2. Align the NMC card with the NMC rail inside the chas-

sis, then insert it into the PCI-E slot and ensure it has

been hooked ﬁrmly.

Installation (Cont.)

The board has a number of jumpers that allow you to con-

ﬁgure your system to suit your application. The table below

lists the function of each of the jumpers and connectors.

Jumpers and Connectors List

Label Function

JCMOS1 Clear CMOS

JC8051_JSPI1 Switch Advanced/Legacy bypass

status

JUART1_SW1 Switch BMC detecting mode

BAT1 Button battery holder

ATX12V1 ATX 4-pin power connector

EATXPWR1 ATX 24-pin power connector

LPC1 LPC 80-Port connector

USB34 USB pin header

SYSFAN1 ~

SYSFAN4 FAN connector

LOM1 IPMI connector for BMC module

DP1 DP/HDMI display port

MSATA1 m-SATA slot

DIMMA1,

DIMMA2,

DIMMB1,

DIMMB2

DDR4 memory slot

CPU1

LGA 1151 CPU footstand, supports

Intel Xeon/i7/i5/i3/Pentium/Celeron

CPU

GF1 PCI-e Gen3 x8 golden nger

GF2 PCI-e Gen2 x4 golden nger

SATA0 ~ SATA3 SATA connector

SPI1, SPI2 BIOS footstand

NGFF_SSD1 M.2 connector

JCMOS1

Pins Result

1-2 Normal status*

2-3 Clear CMOS

*: Default

1 2 3

Keep CMOS data* Clear CMOS data

Jumpers and Connectors

8 FWA-3270 Startup Manual

JC8051_JSPI1

Pins Result

4-8-12

12-8 jumper short: BMC accesses SPI1

4-8 jumper short: BMC GPIO controls swtich

No jumpers short: PCH accesses SPI1

3-7-11 3-7 jumper short: Advanced bypass

7-11 jumper short: Legacy bypass

2-6-10 2-6 jumper short: Advanced bypass

6-10 jumper short: Legacy bypass

1-5-9 1-5 jumper short: Advanced bypass

5-9 jumper short: Legacy bypass

JUART1_SW1

Pins Result

1-2 UART1 SWITCHED BY COM_SOL_

CTRL(Default)

2-3 When BMC is loaded, BMC_DETECT#

changes to 0, while UART1 changes to SOL.

ATX12V1

Pin Pin Name

1 GND

2 GND

3 12V

4 12V

LPC1

Pin Pin Name

1 L_FRAME#

2 GND

3 LAD0

4 CLK

5 LAD1

6 SERIRQ

7 LAD2

8 RESET

9 LAD3

10 VCC3

X12V1

Pin Pin Name

1 3.3V

2 3.3V

3 GND

4 5V

5 GND

6 5V

7 GND

8 POK

9 5VSB

10 12V

11 12V

12 3.3V

13 3.3V

14 -12V

15 GND

16 PSON

17 GND

18 GND

19 GND

20 -5V

21 5V

22 5V

23 5V

24 GND

Jumpers and Connectors (Cont.) Jumpers and Connectors (Cont.)

FWA-3270 Startup Manual 9

SYSFAN1~SYSFAN4

Pin Pin Name

1 GND

2 Power

3 FANIN

4 PWM

USB34

Pin Pin Name

1 +V5_USB34

2 USB3X1_RX-

3 USB3X1_RX+

4 GND

5 USB3X1_TX-

6 USB3X1_TX+

7 GND

8 USB 2.0-

9 USB 2.0+

10 NC

11 USB 2.0+

12 USB 2.0-

13 GND

14 USB3X1_TX+

15 USB3X1_TX-

16 GND

Jumpers and Connectors (Cont.)

USB34

Pin Pin Name

1 GND

2 NC

3 DTR

4 RI

5 TXD

6 CTS

7 RXD

8RTS

9 DCD

10 DSR

Software List:

• Windows 10

• Fedora 22

• CentOS 7.2

Jumpers and Connectors (Cont.)

Software Installation

10 FWA-3270 Startup Manual

SYSFAN1~3

ATX12V1

DIMMB2

DIMMB1

DIMMA2

DIMMA1

BAT1

SATA2

SATA1

ATXPWR1

RST_BTN1

PWR_BTN1

MGMT1~2 LAN1~6

USB34

MSATA1

SPI2

SPI1

NGFF_SSD1

SATA4

SATA0

SYSFAN4

DP1

GF2

CPU1

GF1

Board Layout

Safety Instructions

1. Read these safety instructions carefully.

2. Keep this user manual for later reference.

3. Disconnect this equipment from AC outlet before cleaning. Do not use liquid or spray detergents for cleaning.

4. For pluggable equipment, the power outlet shall be installed near the equipment and shall be easily accessible.

5. Keep this equipment away from humidity.

6. Put this equipment on a reliable surface during installation. Dropping it or letting it fall could cause damage.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Advantech Matériel informatique

Advantech

Advantech IPC-619 Manuel utilisateur

Advantech

Advantech SKY-MXM-A1000 Manuel utilisateur

Advantech

Advantech SOM-6894 Manuel utilisateur

Advantech

Advantech SOM-7583 Manuel utilisateur

Advantech

Advantech MIC-6311 Manuel utilisateur

Advantech

Advantech PPC RFID 98R3P300010 Manuel d'installation et d'exploitation

Advantech

Advantech PCA-6119P7 Manuel d'installation et d'exploitation

Advantech

Advantech PCM-26R1EC Manuel utilisateur

Advantech

Advantech SOM-4463D-S8B2E Manuel utilisateur

Advantech

Advantech MIC-3393 Manuel utilisateur

Advantech

Advantech B+B SMARTWORX IE-iMcV-E1-Mux/4 Manuel utilisateur

Advantech

Advantech ASMB-610 Manuel utilisateur

Advantech

Advantech PCA-6151 Manuel utilisateur

Advantech

Advantech PCM-3362 Manuel utilisateur

Advantech

Advantech ASMB-815 Series Manuel utilisateur

Advantech

Advantech AIMB-707 Manuel d'installation et d'exploitation

Advantech

Advantech PCA-6184 Manuel utilisateur

Advantech

Advantech PPC-6150A Manuel utilisateur

Advantech

Advantech PCL-740 Manuel utilisateur

Advantech

Advantech AIMC-3421 Manuel d'installation et d'exploitation

Advantech

Advantech PCA-6277-B Manuel utilisateur

Advantech

Advantech APAX-5070 Manuel utilisateur

Advantech

Advantech PCA-6190 Manuel utilisateur

Advantech

Advantech PCIE-1816 Manuel utilisateur

Manuels Matériel informatique populaires d'autres marques

EMC2

EMC2 VNX Series Manuel du propriétaire

Panasonic

Panasonic DV0PM20105 Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuel utilisateur

Raidon

Raidon iT2300 Manuel utilisateur

National Instruments

National Instruments PXI-8186 Manuel utilisateur

Hauppauge

Hauppauge WinTV-HVR-2250 Manuel utilisateur

Kontron

Kontron CP6002 Manuel utilisateur

Manhattan

Manhattan 702843 Manuel utilisateur

Aphex

Aphex 230 Manuel utilisateur

AMD

AMD Phenom II Manuel d'exploitation

Intel

Intel NUC 12 Pro Manuel utilisateur

dbx

dbx Zone Pro 1260 Manuel utilisateur

Galaxy

Galaxy GHDX2-2430S-24F4D Manuel utilisateur

Intel

Intel AXXRMFBU4 Manuel utilisateur

Kontron

Kontron DIMM-PC/MD Manuel utilisateur

ST X-NUCLEO-SAFEA1B Mode d'emploi

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuel utilisateur