Advantech PCA-6277-B Manuel utilisateur

PCA-6277-B

Full-size dual socket 370

Intel®Pentium® III proces-

sor based PCI/ISA-bus

CPU card

This document is copyrighted, 2004, by Advantech Co., Ltd. All rights

are reserved. Advantech Co., Ltd. reserves the right to make improve-

ments to the products described in this manual at any time without

notice.

No part of this manual may be reproduced, copied, translated or trans-

mitted in any form or by any means without the prior written permission

of Advantech Co., Ltd. Information provided in this manual is intended

to be accurate and reliable. However, Advantech Co., Ltd. assumes no

responsibility for its use, nor for any infringements upon the rights of

third parties which may result from its use.

Acknowledgements

• AWARD is a trademark of Phoenix Technologies Ltd., Inc.

• IBM and PC are trademarks of International Business Machines Cor-

poration.

•Intel

®and Pentium®III are trademarks of Intel Corporation.

• MS-DOS is a trademark of Microsoft Corporation.

• SMC is a trademark of Standard Microsystems Corporation.

• WinBond is a trademark of Winbond Corporation.

• VIA is a registered trademark of VIA Technologies Inc.

• Adaptec is a registered trademark of Adaptec Inc.

All other product names or trademarks are the properties of their respec-

tive owners.

Part No. 2002627712 3rd Edition

Printed in Taiwan April 2004

A Message to the Customer

Advantech customer services

Each and every Advantech product is built to the most exacting

specifications to ensure reliable performance in the harsh and

demanding conditions typical of industrial environments. Whether

your new Advantech equipment is destined for the laboratory or the

factory floor, you can be assured that your product will provide the

reliability and ease of operation for which the name Advantech has

come to be known.

Your satisfaction is our primary concern. Here is a guide to

Advantech’s customer services. To ensure you get the full benefit of

our services, please follow the instructions below carefully.

Technical support

We want you to get the maximum performance from your products.

So if you run into technical difficulties, we are here to help. For the

most frequently asked questions, you can easily find answers in your

product documentation. These answers are normally a lot more

detailed than the ones we can give over the phone.

So please consult this manual first. If you still cannot find the answer,

gather all the information or questions that apply to your problem, and

with the product close at hand, call your dealer. Our dealers are well

trained and ready to give you the support you need to get the most

from your Advantech products. In fact, most problems reported are

minor and are able to be easily solved over the phone.

In addition, free technical support is available from Advantech

engineers every business day. We are always ready to give advice on

application requirements or specific information on the installation

and operation of any of our products.

elbatnosirapmocseireSB-7726-ACP

ledoM1B00-V7726-ACP1B00-EV7726-ACP1B00-2E7726-ACP1B00-F7726-ACP

:UPC letnIlauD

muitneP

073tekcoSIII

✓✓ ✓✓

troPBSU

22 44

stroplellarap1,laires2

✓✓ ✓✓

:AGV AGV/PGA

)LX4orP821egaRITA(

✓✓ ✓✓

:NALlauD tenrehtET-esaB001/01

)C9318ketlaeR:tespihc(

✕elgniS lauDlauD

)9987CIAcetpadA(ISCS061artlU

✕✕ ✕✓

MARDSAGV

BM23 BM23BM23BM23

Product warranty

Advantech warrants to you, the original purchaser, that each of its

products will be free from defects in materials and workmanship for

two years from the date of purchase.

This warranty does not apply to any products which have been

repaired or altered by persons other than repair personnel authorized

by Advantech, or which have been subject to misuse, abuse, accident

or improper installation. Advantech assumes no liability under the

terms of this warranty as a consequence of such events.

If an Advantech product is defective, it will be repaired or replaced at

no charge during the warranty period. For out-of-warranty repairs, you

will be billed according to the cost of replacement materials, service

time and freight. Please consult your dealer for more details.

If you think you have a defective product, follow these steps:

1. Collect all the information about the problem encountered. (For

example, type of PC, CPU speed, Advantech products used, other

hardware and software used, etc.) Note anything abnormal and list

any on-screen messages you get when the problem occurs.

2. Call your dealer and describe the problem. Please have your

manual, product, and any helpful information readily available.

3. If your product is diagnosed as defective, obtain an RMA (return

material authorization) number from your dealer. This allows us to

process your return more quickly.

4. Carefully pack the defective product, a fully-completed Repair and

Replacement Order Card and a photocopy proof of purchase date

(such as your sales receipt) in a shippable container. A product

returned without proof of the purchase date is not eligible for

warranty service.

5. Write the RMA number visibly on the outside of the package and

ship it prepaid to your dealer.

Initial Inspection

Before you begin installing your card, please make sure that the follow-

ing materials have been shipped:

• 1 PCA-6277-B dual socket 370 Pentium® III processor-based single

board computer

• 2 Pentium® III processor with cooling fans (optional)

• 1 PCA-6277-B startup Manual

• 1 CD driver utility and manual (in PDF format)

• 1 SCSI driver disk (optional)

• 1 FDD cable, P/N: 1700340640

• 2 UDMA 66/100 HDD cables, P/N: 1701400452

• 1 printer (parallel port) cable & COM port cable kit, P/N:

1700060305

• 1 ivory cable for PS/2 keyboard and PS/2 mouse (optional), P/N:

1700060202

• 1 SCSI cable (optional), P/N 1701060000

• 1 USB cable (optional), P/N 1700100170

If any of these items are missing or damaged, contact your distributor

or sales representative immediately.

We have carefully inspected the PCA-6277-B mechanically and

electrically before shipment. It should be free of marks and scratches

and in perfect working order upon receipt.

As you unpack the PCA-6277-B, check it for signs of shipping damage.

(For example, damaged box, scratches, dents, etc.) If it is damaged or it

fails to meet the specifications, notify our service department or your lo-

cal sales representative immediately. Also notify the carrier. Retain the

shipping carton and packing material for inspection by the carrier. After

inspection, we will make arrangements to repair or replace the unit.

Contents

Chapter 1 Hardware Configuration .............................. 1

1.1 Introduction ........................................................................2

1.2 Features ...............................................................................3

1.3 Specifications ......................................................................5

1.3.1 System .........................................................................5

1.3.2 Memory .......................................................................5

1.3.3 Input/Output ................................................................6

1.3.4 VGA interface .............................................................6

1.3.5 SCSI interface .............................................................6

1.3.6 Ethernet LAN ..............................................................6

1.3.7 Industrial features ........................................................7

1.3.8 Mechanical and environmental specifications ............7

1.4 Jumpers and Connectors ...................................................8

1.5 Board Layout: Jumper and Connector Locations ........ 11

1.6 Safety Precautions ............................................................14

1.7 Jumper Settings ................................................................15

1.7.1 How to set jumpers.................................................... 15

1.7.2 CMOS clear (J1) .......................................................16

1.7.3 Watchdog timer output (J2) ...................................... 16

1.8 System Memory ................................................................ 17

1.8.1 Sample calculation: DIMM memory capacity .......... 17

1.8.2 Supplementary information about DIMMs ...............18

1.9 Memory Installation Procedures ....................................19

1.10 Cache Memory .................................................................19

1.11 CPU Installation ...............................................................20

1.12 Dual Processor Systems ...................................................21

Chaper 2 Connecting Peripherals .............................. 23

2.1 Introduction ......................................................................24

2.2 Primary (CN1) and Secondary (CN2) IDE Connectors 24

2.3 Floppy Drive Connector (CN3) .......................................25

2.4 Parallel Port (CN4) ..........................................................26

2.5 USB Port (CN6) ................................................................27

2.6 USB Ports (CN31 and CN32) ..........................................27

2.7 VGA Connector (CN7) .....................................................28

2.8 10/100Base-T Ethernet Connectors (CN8 and CN34) ...28

2.9 Serial Ports (CN9: COM1; CN10: COM2) ....................29

2.10 PS/2 Keyboard & Mouse Connectors (CN11, CN33) ....31

2.11 External Keyboard Connector (CN12) ..........................31

2.12 CPU_1 Fan Connector (CN14)........................................32

2.13 CPU_2 Fan Connector (CN15)........................................32

2.14 Front Panel Conn(CN16,17,18,19,21,22) ........................32

2.14.1 Keyboard lock and power LED (CN16) .................33

2.14.2 External speaker (CN17) .........................................33

2.14.3 Reset (CN18) ...........................................................34

2.14.4 HDD LED (CN19) ..................................................34

2.15 ATX Power Control Connectors (CN20 and CN21) .....35

2.15.1 ATX conn (CN20)& soft pwr switch conn (CN21) 35

2.15.2 Controlling the soft power switch ...........................36

2.16 SNMP-1000 Remote Manager Connector ......................36

Chapter 3 Award BIOS Setup ..................................... 37

3.1 Introduction ......................................................................38

3.1.1 CMOS RAM backup .................................................38

3.2 Entering Setup ..................................................................39

3.3 Standard CMOS Setup ....................................................39

3.4 Advanced BIOS Features ................................................40

3.4.1 Virus Warning............................................................40

3.4.2 CPU Internal Cache...................................................40

3.4.3 CPU L2 Cache ECC Checking .................................41

3.4.4 First/Second/Third/Other Boot Device .....................41

3.4.5 Swap Floppy Drive ...................................................41

3.4.6 Boot UP Floppy Seek ................................................41

3.4.7 Boot Up NumLock Status .........................................41

3.4.8 Gate A20 Option .......................................................41

3.4.9 Typematic Rate Setting .............................................42

3.4.10 Typematic Rate (Chars/Sec) ....................................42

3.4.11 Typematic Delay (msec) .......................................... 42

3.4.12 Security Option ....................................................... 42

3.4.13 MPS Version Control For OS [1.1] .........................42

3.4.14 OS Select for DRAM > 64MB ................................ 42

3.4.15 Video BIOS Shadow ............................................... 43

3.5 Advanced Chipset Features ............................................. 43

3.5.1 DRAM Clock ............................................................44

3.5.2 SDRAM Cycle Length .............................................. 44

3.5.3 Bank Interleave .........................................................44

3.5.4 Memory Hole ............................................................45

3.5.5 System BIOS Cacheable ........................................... 45

3.5.6 AGP Aperture Size .................................................... 45

3.5.7 AGP-4X Mode ..........................................................45

3.5.8 AGP Driving Control ................................................45

3.5.9 AGP Fast Write.......................................................... 45

3.5.10 Onboard USB ..........................................................46

3.5.11 USB Keyboard Support ........................................... 46

3.5.12 USB Mouse Support ............................................... 46

3.5.13 CPU to PCI Write Buffer ........................................46

3.5.14 PCI Dynamic Bursting ............................................46

3.5.15 PCI Master 0 WS Write........................................... 47

3.5.16 PCI Delay Transaction ........................................... 47

3.5.17 AGP Master 1 WS Write ......................................... 47

3.5.18 AGP Master 1 WS Read .......................................... 47

3.5.19 Memory Parity/ ECC Check ...................................47

3.6 Integrated Peripherals .....................................................48

3.6.1 On-Chip Primary/Secondary PCI IDE ......................48

3.6.2 IDE Primary Master/Slave PIO/UDMA Mode,

IDE Secondary Master/Slave PIO/UDMA Mode (Auto) ... 48

3.6.3 Init Display First ....................................................... 49

3.6.4 Onboard LAN1/LAN2 Chip .....................................49

3.6.5 IDE HDD Block Mode.............................................. 49

3.6.6 Onboard FDD Controller ..........................................50

3.6.7 Onboard Serial Port 1 (3F8/IRQ4) ............................50

3.6.8 Onboard Serial Port 2 (2F8/IRQ3) ............................50

3.6.9 UART 2 Mode ...........................................................50

3.6.10 Onboard Parallel Port (378/IRQ7) ..........................51

3.6.11 Onboard Parallel Mode (ECP + EPP) ..................... 51

3.6.12 ECP Mode Use DMA ..............................................51

3.6.13 Parallel Port EPP Type ............................................51

3.7 Power Management Setup ...............................................52

3.7.1 Power Supply Type ...................................................52

3.7.2 ACPI function ...........................................................52

3.7.3 Power Management ...................................................53

3.7.4 PM Control by APM .................................................53

3.7.5 Video Off Option.......................................................54

3.7.6 Video Off Method .....................................................54

3.7.7 MODEM Use IRQ ....................................................54

3.7.8 Soft-Off by PWRBTN...............................................54

3.7.9 State After Power Failure ..........................................55

3.7.10 Wake Up Events ......................................................55

3.8 Wake Up Event .................................................................56

3.8.1 VGA ..........................................................................56

3.8.2 LPT & COM .............................................................56

3.8.3 HDD & FDD .............................................................56

3.8.4 Power On by LAN ....................................................56

3.8.5 Power On by Modem ................................................57

3.8.6 Power On by Alarm ...................................................57

3.9 PnP/PCI Configurations ..................................................58

3.9.1 PnP OS Installed ....................................................... 58

3.9.2 Reset Configuration Data ..........................................58

3.9.3 Resources Controlled By: .........................................58

3.9.4 PCI/VGA Palette Snoop ............................................ 59

3.9.5 Assign IRQ for VGA ................................................59

3.9.6 Assign IRQ for US13 ................................................59

3.10 PC Health Status ..............................................................59

Table des matières

Autres manuels Advantech Matériel informatique

Advantech

Advantech ASMB-935 Series Manuel utilisateur

Advantech

Advantech ADAM-3956 Manuel d'installation et d'exploitation

Advantech

Advantech PCIe-1674 Manuel utilisateur

Advantech

Advantech ACP-7000 Manuel utilisateur

Advantech

Advantech MIC-75M20 Manuel d'installation et d'exploitation

Advantech

Advantech PCM-4380 Manuel d'installation et d'exploitation

Advantech

Advantech EPC-T4286 Series Manuel utilisateur

Advantech

Advantech ROM-5722 Manuel utilisateur

Advantech

Advantech UNO-2372G V2 Manuel utilisateur

Advantech

Advantech PCA-6275 Manuel utilisateur

Advantech

Advantech PCA-6753 Manuel d'installation et d'exploitation

Advantech

Advantech AIMB-278 Manuel utilisateur

Advantech

Advantech ECU-479 Series Manuel utilisateur

Advantech

Advantech SOM-6897 Manuel utilisateur

Advantech

Advantech PCL-725 Manuel utilisateur

Advantech

Advantech PCI-1716 Manuel utilisateur

Advantech

Advantech PCA-6119P7 Manuel d'installation et d'exploitation

Advantech

Advantech PCIE-1158 Manuel d'installation et d'exploitation

Advantech

Advantech UNO-2484G Manuel utilisateur

Advantech

Advantech MIC-75M20 Manuel d'installation et d'exploitation

Advantech

Advantech AIMB-786 Manuel d'installation et d'exploitation

Advantech

Advantech AdvLinuxTU Manuel utilisateur

Advantech

Advantech PCIE-1756 Manuel utilisateur

Advantech

Advantech SOM-4450 ETX Manuel utilisateur

Manuels Matériel informatique populaires d'autres marques

EMC2

EMC2 VNX Series Manuel du propriétaire

Panasonic

Panasonic DV0PM20105 Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuel utilisateur

Raidon

Raidon iT2300 Manuel utilisateur

National Instruments

National Instruments PXI-8186 Manuel utilisateur

Hauppauge

Hauppauge WinTV-HVR-2250 Manuel utilisateur

Kontron

Kontron CP6002 Manuel utilisateur

Manhattan

Manhattan 702843 Manuel utilisateur

Aphex

Aphex 230 Manuel utilisateur

AMD

AMD Phenom II Manuel d'exploitation

Intel

Intel NUC 12 Pro Manuel utilisateur

dbx

dbx Zone Pro 1260 Manuel utilisateur

Galaxy

Galaxy GHDX2-2430S-24F4D Manuel utilisateur

Intel

Intel AXXRMFBU4 Manuel utilisateur

Kontron

Kontron DIMM-PC/MD Manuel utilisateur

ST X-NUCLEO-SAFEA1B Mode d'emploi

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuel utilisateur