Advantech AIMB-786 Manuel d'installation et d'exploitation

AIMB-786 Startup Manual 1

AIMB-786 LGA1151 Intel® Core™ i7/i5/i3 ATX with

Triple Display, Dual GbE LAN, SATA 3.0, USB 3.1, DDR4

Startup Manual

Specications (Cont.)

Packing List

For more information on this and other Advantech prod-

ucts, please visit our website at:

http://www.advantech.com

For technical support and service, please visit our sup-

port website for AIMB-786 at:

http://advt.ch/aimb786spt

extra warranty for free at:

http://www.register.advantech.com

This manual is for the AIMB-786 series Rev. A1.

Part No. 2001078612

Printed in China

3rd Edition

February 2023

Note: Due to the inherent limitations of PC architecture,

the system may not fully detect 64 GB RAM

when 64 GB RAM is installed.

• SATA interface: Five onboard Serial ATA 3.0 connec-

tors support data transmission rates of up to 600 MB/s.

All ve SATA 3.0 ports support Advanced Host Controller

Interface (AHCI) technology.

• PCIe and PCI slots: 1 PCIe x16 expansion slot, 4 PCIe

x4 expansion slots, 2 PCI slots 32-bit/33 MHz PCI 2.2

compliant

• LPC interface: Advantech-designed LPC connector sup-

ports dTPM 2.0 module.

• Serial ports: Six serial ports: COM1, COM2 and COM4 ~

6 are RS-232; COM3 is RS-232/422/485 with jumper and

BIOS menu options.

• Keyboard/mouse connector: An external keyboard and

mouse connector on the motherboard is supported. No

PS/2 keyboard/mouse connector is supported in the rear

I/O.

• Watchdog timer: 255 sec timer intervals

• USB 3.1/2.0: 2 USB 3.1 (Gen 2) ports on rear with up to

10 Gb/s data rate, 4 USB 3.1 Gen 1 ports (2 rear, 2 via

header), 7 USB 2.0 ports (4 rear, 2 via header, 1 internal

Type-A)

Graphics Interface

• Chipset: CPU integrated graphics controller

• Display memory: 1 GB maximum shared memory with 2

GB and above system memory installed

• DisplayPort: Resolution up to 4096 x 2304 @ 60 Hz

refresh rate

• DVI-D: Resolution up to 1920 x 1200 @ 60 Hz refresh

rate

• VGA: Resolution up to 1920 x 1200 @ 60 Hz refresh rate

Ethernet Interface

• Interface: 10/100/1000 Mbps

• Controller: LAN1: Intel® I219-LM; LAN2: Intel® I210-AT

Mechanical and Environmental

• Dimensions (L x W): 304.8 x 244 mm (12” x 9.6”)

• Power supply voltage: +3.3 V, +5 V, +12 V, +5 Vsb

• Power consumption:

Intel® Core™ i7-8700 3.2 GHz; DDR4 16 GB x 4

Maximum: +3.3 V at 2.8 A, +5 V at 1.77 A, +12 V at 3.77 A,

+5 Vsb at 0.1 A, -5 V at 0.06 A, -12 V at 0.04 A

• Operating temperature: 0 ~ 60 °C (depending on CPU)

• Weight of board: 0.7 kg (1.54 lb)

Before you begin installing your card, please make sure that

the following items have been shipped:

• 1 AIMB-786 motherboard

• 1 AIMB-786 Startup Manual

• 2 Serial ATA HDD data cables

• 2 Serial ATA HDD power cables

• 1 I/O port bracket

If any of these items are missing or damaged, please con-

tact your distributor or sales representative immediately.

Note: Acrobat Reader is required to view any PDF

le. Acrobat Reader can be downloaded at:

www.adobe.com/Products/acrobat/readstep2.

html (Acrobat is a trademark of Adobe)

Standard Functions

• CPU: LGA1151 socket supporting 8/9th Gen Intel®

Core™ i7/i5/i3 and Pentium®/Celeron® processors

• BIOS: AMI 256 Mbit SPI BIOS

• Chipset: Intel® Q370 PCH

• System memory: Up to 64 GB in four 288-pin DIMM

sockets, supporting dual-channel DDR4 2400/2666

SDRAM. AIMB-786 supports non-ECC unbu󰀨ered DIMMs

and does not support any memory conguration that

mixes non-ECC with ECC unbu󰀨ered DIMMs.

Specications

2 AIMB-786 Startup Manual

The board has a number of jumpers that allow you to con-

gure your system to suit your application. The table below

lists the function of each jumper and connector.

Connector/Jumper List

Label Function

LAN1, LAN2 LAN1, LAN2

USB3C1 USB 3.1 Gen 2 port 1, 2

USB3C2 USB 3.1 Gen 1 port 1, 2

USB3H1 USB 3.1 Gen 1 port 1, 2

(20-pin header)

USB2C1 USB 2.0 port 1, 2, 3, 4

USB2A1 USB 2.0 port (internal Type-A)

USB2H2 USB 2.0 port 1, 2 (10-pin header)

VGA1+DVI1 VGA connector / DVI-D connector

COM1+DP1 Serial port: RS-232 (DB-9 connec-

tor) / DP connector

DP2 Connector for optional DP/DVI/

HDMI cable

COM2,

COM4 ~ COM6 Serial port: RS-232 (9-pin header)

COM3 Serial port: RS-232/422/485 (9-pin

header)

KBMS1 External keyboard and mouse con-

nector (6-pin header)

CPUFAN1 CPU fan connector (4-pin)

SYSFAN1 ~

SYSFAN3 System fan connector (4-pin)

JFP3

Keyboard lock and power LED

Suspend: fast ash (ATX/AT)

System on: ON (ATX/AT)

System o󰀨: OFF (AT/ATX)

JFP2 External speaker / HDD LED con-

nector / SMBus connector

JFP1 Power switch / reset connector

AUDIO1+AUDIO2 Audio connector (Line-Out, Mic-In)

VOLT1 Alarm board power connector

JCASE1 Case open connector

LANLED1 Front panel LAN indicator con-

nector

SATA1 ~ SATA5 Serial ATA 3.0 port

PCI1 PCI slot

PCI2 PCI slot

PCIE1 PCIe x16 slot

PCIE2 PCIe x4 slot

PCIE3 PCIe x4 slot

PCIE4 PCIe x4 slot

PCIE5 PCIe x4 slot

DIMMA1 Channel A DIMM1

DIMMA2 Channel A DIMM2

DIMMB1 Channel B DIMM1

DIMMB2 Channel B DIMM2

ATX12V1 ATX 12 V auxiliary power connector

(for CPU)

EATXPWR1 ATX 24-pin main power connector

(for system)

SPI_CN1 Update BIOS pin header

SPDIF_OUT1 SPDIF audio out pin header

GPIO1 8-bit GPIO from super I/O

SMBUS1 SMBus connector from PCH

FPAUD1 Front panel audio connector

LPC1

Low pin count connector for

Advantech dTPM 2.0 and RS232

modules.

JCMOS1 Clear CMOS

JME1 Intel® ME update

JWDT1 Watchdog timer reset

JOBS1 Hardware monitor alarm

PSON1 AT/ATX mode selection

JUSB_1

USB power source switch between

+5 V and +5 V_ DUAL for rear

USB ports

JUSB_2

USB power source switch between

+5 V and +5 V_ DUAL for onboard

USB ports

JPCICLK1 PCI clock selection

JSETCOM3 COM3 RS-232/422/485 jumper

setting

JT1, JR1 COM3 RS-422/485 termination

resistor

JFV1 VGA dummy load setting

PSON1: ATX/AT Mode Selection

Closed Pins

Result

1-2 AT mode

2-3 *ATX mode

* Default

AT mode *ATX mode

1 2 3

Jumpers and Connectors Jumpers and Connectors (Cont.)

AIMB-786 Startup Manual 3

JCMOS1: Clear CMOS

JME1: Clear ME

Pins Result

1-2 *Keep CMOS data

*Enable ME update

2-3

Clear CMOS data

Disable ME update

* Default

*Keep CMOS data Clear CMOS data

*Enable ME update Disable ME update

JWDT1+JOBS1: Watchdog Timer Output and OBS

Alarm

Closed Pins

Result

2-4, 8-10 Watchdog timer disable (2-4)

OBS beep (8-10)

4-6, 8-10 *Watchdog timer reset (4-6)

OBS beep (8-10)

* Default

Watchdog timer disable (2-4) *Watchdog timer reset (4-6)

OBS beep (8-10) OBS beep (8-10)

JUSB1 (Rear USB), JUSB2 (Onboard USB): USB

Power Source Switch Between +5V and +5V_DUAL

Closed Pins

Result

1-2 *USB +5V_DUAL power

2-3 USB +5V power

* Default

*USB +5 V_DUAL power USB +5 V power

JPCICLK1: PCI Clock Selection

Closed Pins

Result

1-2 *33/66 MHz autodetected

2-3 33 MHz

* Default

*33/66 MHz autodetected 33 MHz

1 2 3

JSETCOM3: COM3 RS-232/422/485 Jumper Settings

Closed Pins

Result

5-6, 7-9, 8-10,

13-15, 14-16 *RS-232

3-4, 9-11,

10-12, 15-17,

16-18

RS-422

1-2, 9-11,

10-12, 15-17,

16-18

RS-485

* Default

Note!

If RS-485 is selected, it is necessary to change device

mode to RS-485 for further choice of auto ow control

under BIOS menu. Please refer to Chapter 3.2.2.10 of user

manual for additional settings.

JT1 (TX Signal), JR1 (RX Signal): COM3 RS-422/485

Termination Resistor

Closed Pins

Result

1-2 Disable termination

2-3 *Enable termination

* Default

Disable termination *Enable termination

*RS-232

RS-422

RS-485

Jumpers and Connectors (Cont.) Jumpers and Connectors (Cont.)

4 AIMB-786 Startup Manual

JFV1: VGA Dummy Load Setting

Closed Pins

Result

1-2 Enable VGA dummy load

2-3 *Disable VGA dummy load

* Default

Enable VGA dummy load *Disable VGA dummy load

Note!

It is recommended to leave this function disabled if you

useDVI/DP as your main display.

1 2 3

Board Layout

Jumpers and Connectors (Cont.)

Caution! The computer is supplied with a battery-powered

realtime clock circuit. There is a danger of

explosion if the battery is incorrectly replaced.

Replace only with the same or equivalent type

recommended by the manufacturer. Discard

used batteries according to the manufacturer’s

instructions.

This device complies with the requirements in Part 15 of

the FCC rules. Operation is subject to the following two

conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received,

including interference that may cause undesired opera-

tion.

Figure 1: Board Layout: Jumper and Connector Locations

COM2

SATA1 SATA3 SATA5

SATA2 SATA4

DIMMB2

DIMMB1

DIMMA2

DIMMA1

PCI1

PCIE4

PCIE1

Intel Q370 PCH

Intel LGA1151

Core i7/i5/i3

USB2A1

USB3H1

COM3

USB2H2

AUDIO1+AUDIO2

LAN2

USB3C2

LAN1

USB3C1

VGA1

DVI1

USB2C1

COM1

DP1

SYSFAN1

SYSFAN3

VOLT1 EATXPWR1 PSON1

SPI_CN1 GPIO1 SMBUS1

JCASE1

COM4

COM5

COM6

LPC1

JSETCOM3

JT1, JR1

JWDT1+JOBS1

JFP3

JFP1+JFP2

CPUFAN1

JUSB_2

JCMOS1

JME1

PCIE2

PCIE3

PCIE5

PCI2

JPCICLK1

SPDIF_OUT1 FPAUD1

LANLED1

KBMS1

JVF1

DP2

ATX12V1

JUSB_1

SYSFAN2

3 6 9 12

25811

PWRSW RESET

HDDLED

SNMP

JFP1

2 5 8 11

1 4 7 10

HDDLED

SM_BUS

SPEAKER

JFP2

PWRLED & KEYLOCK

12345

JFP3

Jumpers and Connectors (Cont.)

Autres manuels pour AIMB-786

Autres manuels Advantech Matériel informatique

Advantech

Advantech MIC-300 Manuel d'installation et d'exploitation

Advantech

Advantech PPC RFID 98R3P300010 Manuel d'installation et d'exploitation

Advantech

Advantech MIO-5376 Manuel d'installation et d'exploitation

Advantech

Advantech POC-W243 Series Manuel utilisateur

Advantech

Advantech MIO-5376 Manuel utilisateur

Advantech

Advantech PCA-6119P7 Manuel d'installation et d'exploitation

Advantech

Advantech PCE-5B05V-30B1E Manuel d'installation et d'exploitation

Advantech

Advantech AIMB-788 Manuel utilisateur

Advantech

Advantech AMAX-5070 Manuel utilisateur

Advantech

Advantech PCM-9366 Manuel d'installation et d'exploitation

Advantech

Advantech PPC-IPS Manuel utilisateur

Advantech

Advantech FWA-3270A Manuel d'installation et d'exploitation

Advantech

Advantech PCM-4380 Manuel d'installation et d'exploitation

Advantech

Advantech ITA-260 Series Manuel d'installation et d'exploitation

Advantech

Advantech SOM-MZ10 Manuel d'installation et d'exploitation

Advantech

Advantech SKY-MXM-A500 Manuel utilisateur

Advantech

Advantech PCL-818L Manuel utilisateur

Advantech

Advantech FWA-3033-00A1R Manuel d'installation et d'exploitation

Advantech

Advantech MIC-7 Series Manuel d'installation et d'exploitation

Advantech

Advantech MIC-715-OX Manuel utilisateur

Advantech

Advantech SOM-4463D-S8B2E Manuel utilisateur

Advantech

Advantech PPC-6150A Manuel utilisateur

Advantech

Advantech USB-4750 Manuel utilisateur

Advantech

Advantech ACP-2020G Manuel utilisateur

Manuels Matériel informatique populaires d'autres marques

EMC2

EMC2 VNX Series Manuel du propriétaire

Panasonic

Panasonic DV0PM20105 Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuel utilisateur

Raidon

Raidon iT2300 Manuel utilisateur

National Instruments

National Instruments PXI-8186 Manuel utilisateur

Hauppauge

Hauppauge WinTV-HVR-2250 Manuel utilisateur

Kontron

Kontron CP6002 Manuel utilisateur

Manhattan

Manhattan 702843 Manuel utilisateur

Aphex

Aphex 230 Manuel utilisateur

AMD

AMD Phenom II Manuel d'exploitation

Intel

Intel NUC 12 Pro Manuel utilisateur

dbx

dbx Zone Pro 1260 Manuel utilisateur

Galaxy

Galaxy GHDX2-2430S-24F4D Manuel utilisateur

Intel

Intel AXXRMFBU4 Manuel utilisateur

Kontron

Kontron DIMM-PC/MD Manuel utilisateur

ST X-NUCLEO-SAFEA1B Mode d'emploi

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuel utilisateur