ACME V-BOX Manuel utilisateur

CONTENTS

1. Technical Specifications ......................................................................... 2

2. Control Panel ......................................................................................... 3

3. Connections ........................................................................................... 4

4. Test Instructions..................................................................................... 5

4.1 ACME luminaire pressure test.......................................................... 5

4.2 User-defined pressure test ............................................................... 7

4.3 Air leakage test................................................................................. 9

5. System Setting ..................................................................................... 10

6. System Upgrade ................................................................................... 12

1. Technical Specifications

Power Voltage:

AC 100~240V, 50/60Hz

Power Consumption:

Positive pressure: 40W

Negative pressure: 30W

Lux:

15L/minute

Maximum positive pressure:

80kpa

Maximum negative pressure:

-60kpa

Construction:

Display: LCD display

Accessories: An air pump; Four air pressure valves; Power Cable

Protection Rating: IP65

Control:

Firmware Upgrade: Update via USB link

Features:

V-BOX is a portable air tightness tester. The test objects are waterproof luminaires.

It is a non-destructive testing instrument based on the principle of pressure drop method and

using compressed air (or vacuum) as the medium to test products，The utility model has the

advantages of simple structure, complete functions and sensitive precision, which can be used

only by connecting the power interface and the luminaire interface, and can be used as an

emergency test equipment to test whether the luminaire is waterproof or leaky.

Dimension/Weight:

285x355x165mm, 7kgs

14”x6.5”x12.6”in, 15.4lbs

2. Control Panel

4 Pressure/Vacuum.To Fixture

5.USB

6 STOP.

1 Display.2 Button.

7 POWER IN.

8 POWER SWITCH.

9 START.

3 User Manual.

1. Display:To show the various menus and the selected function

2. Button:

To enter into move backward or leave the menu

To go backward to move up in the menu

DOWN

To go forward to move down in the menu

ENTER

To perform the desired functions

3. User Manual

4. Pressure/Vacuum To Fixture:

Used to connect the air hose to pump/transfer gas for the luminaire

5. USB:

Used to upgrade the system or export the test record

6. Stop:

Press to stop testing

7. Power In:

Used to connect to supply power

8. Power Switch:

Turn on/off the power

9. Start:

Press to start testing

3. Connections

1. Connect the power cable to the fixture (Figure 1) and plug it in.

Figure 1

2. Take out the air hose (Figure 2), which has a quick-connect fitting and a bigger nozzle at each end

(Figure 3). Connect the air hose quick-connect fitting to the fixture (Figure 4). Carefully insert the

threaded end of the nozzle into the air relief valve hole of the luminaire and twist it until it is finger

tight (Figure 5), then switch the fixture on (Figure 6).

Figure 2

Figure 3

Figure 4 Figure 5

Figure 6

3. To switch the fixture off, press the power switch again or remove the power cable directly.

4. Test Instructions

Attention: The connection between the luminaire and the V-BOX should be kept sealed, otherwise the

test will be affected.

4.1 ACME luminaire pressure test

1. Enter the Main Menu and use the UP/DOWN button to select Air Pressure Test (Figure 1), press the

ENTER button to confirm, press the MENU button to exit.

Figure 1

2. Enter the Test Menu and use the UP/DOWN button to select Fixture Model(Figure 2), press the

ENTER button to confirm, press the MENU button to exit.

Figure 2

3. Use the UP/DOWN button to select the corresponding model on Select Model page (Figure 3), press

the ENTER button to restore, press the MENU button to exit.

Figure 3

4. Enter into the test page (Figure 4, Figure 5) and press the green button to start testing.

Figure 4 Figure 5

5. If there is any problem during the test, please press the red button to stop the test.

6. “Test Pass” will be displayed when the test passes (Figure 6) and “Test Failed” will be displayed

when the test fails (Figure 7).

Figure 6 Figure 7

4.2 User-defined pressure test

1. Enter the Main Menu and use the UP/DOWN button to select Air Pressure Test (Figure 1), press the

ENTER button to confirm, press the MENU button to exit.

Figure 1

2. Enter the Test Menu and use the UP/DOWN button to select Manual Setting (Figure 2),press the

ENTER button to confirm. Adjust the parameters of the time and pressure on the Manual Setting page

(Figure 3), press the ENTER button to restore and the system will automatically return to the Test

Menu.

Figure 2 Figure 3

3. Enter the Test Menu and use the UP/DOWN button to select Vacuum Test (Figure 4) or Pressure

Test (Figure 5) as needed, press the ENTER button to confirm, press the MENU button to exit.

Figure 4 Figure 5

4. Enter into the test page (Figure 6, Figure 7) and press the green button to start testing.

Figure 6 Figure 7

5. If there is any problem during the test, please press the red button to stop the test.

6. “Test Pass” will be displayed when the test passes (Figure 8) and “Test Failed” will be displayed

when the test fails (Figure 9).

Figure 8Figure 9

4.3 Air leakage test

1. Enter into the Main Menu and use the UP/DOWN button to select Air Leakage Test (Figure 1), press

the ENTER button to confirm, press the MENU button to exit.

Figure 1

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels ACME Équipement d'éclairage

ACME

ACME PIXEL LINE IP Manuel utilisateur

ACME

ACME DAZZLED COLORLED-430 Manuel utilisateur

ACME

ACME DIABOLO 500 Manuel utilisateur

ACME

ACME RAYZOR HYBRID Manuel utilisateur

ACME

ACME Spartan Hybrid Manuel utilisateur

ACME

ACME Building wash Manuel utilisateur

ACME

ACME SAMURAI SCAN 50 Manuel utilisateur

ACME

ACME VOGUE Manuel utilisateur

ACME

ACME LED-PS10D RGBW Manuel utilisateur

ACME

ACME LED-PS10 Manuel utilisateur

ACME

ACME VENOM LED-460 Manuel utilisateur

ACME

ACME DMX512 Dynamic Scan Manuel utilisateur

ACME

ACME Warrior Scan 50 LED-SC50C Manuel utilisateur

ACME

ACME ICARUS 620 Manuel utilisateur

ACME

ACME BP-183 RGBW S R DXX Manuel utilisateur

ACME

ACME Diamonds II Manuel utilisateur

ACME

ACME Energy Spot PRO Manuel utilisateur

ACME

ACME CB-16TC Manuel utilisateur

ACME

ACME Gemini Manuel utilisateur

ACME

ACME XP-5000SZ F Manuel utilisateur

ACME

ACME iSolution Manuel utilisateur

ACME

ACME LED-0408 Manuel utilisateur

ACME

ACME Splendor 220 II Manuel utilisateur

ACME

ACME BTDG40 Manuel utilisateur

Manuels Équipement d'éclairage populaires d'autres marques

Brizo

Brizo 8SP-MU-4 Manuel utilisateur

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manuel utilisateur

IKEA

IKEA BJÖRKSPIREA Manuel utilisateur

Laserworld

Laserworld Evolution Series ES-400RGB Manuel utilisateur

Alien

Alien RG STAR Manuel utilisateur

EuroLite

EuroLite LED B-40 Manuel utilisateur

Qazqa

Qazqa Suplux SL 3 Black 103062 Manuel utilisateur

Commercial Electric

Commercial Electric 54568141 Manuel utilisateur

CREE LIGHTING

CREE LIGHTING 304 Series Manuel utilisateur

Goobay

Goobay 49867 Manuel utilisateur

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manuel utilisateur

Alkalite

Alkalite Krypton KT-81 Manuel utilisateur

Clas Ohlson

Clas Ohlson GU10 Manuel utilisateur

DTS

DTS DELTA 10 F Manuel utilisateur

ring

ring Solar Steplight Manuel utilisateur

One Stop Gardens

One Stop Gardens 57696 Instructions de montage

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manuel utilisateur

SIREM

SIREM Swimeo A2 Manuel utilisateur