ACME TRACK 10 Manuel utilisateur

Features

E-10T/E-40T is Track Version, uniform light, sharp image edge, and

self-locking focus lens.

The product takes advantage of the heat pipe heat conduction and housing

feature to dissipate heat without fan to prolong LED life.

Specifications

Power Voltage: AC 85~127V, 50/60Hz

AC 175~264V, 50/60Hz

Power Consumption: 15W (E-10T)

30W (E-40T)

Light Source:

E-10T CW DXX: LTAW1202-012-007-5500

E-10T WW DXX: LTAW1202-012-007-3150

E-40T CW DXX: C117C1206-036-001

E-40T WW DXX: C117W1206-036-001

Color Temperature: 5600K±150K (E-10T/40T CW)

3200K±150K (E-10T/40T WW)

Beam Angle: 19°/26°/36°/50°(optional)

CRI≥95

Dimension/Weight: 273x231x128mm, 1.3kgs

10.7”x9.1”x5”in, 2.9lbs

Photometric diagram:

E-10T

273

231

128

Distance(m) 2 4 6 8

310 77 34 19

212 53 23 13

540 135 60 33

415 103 46 25

Distance(m) 6

Diameter(m)

СW/WW 1.31 2.59 3.91 5.19

Diameter(m)

CW/WW 1.87 3.73 5.59 7.46

1898 475 211 120

981 246 109 62

2002 501 223 125

Diameter(m)

CW/WW 0.68 1.34 2.01 2.68

1095 274 122 68

Diameter(m)

CW/WW 0.94 1.85 2.78 3.70

E-40T

How To Change The Gobo

At first, put the gobo by hand as the arrow into the gobo gel splint, and

insert the gobo gel splint into the slot of the unit, please turn the hand

knob to left or right in order to take out gobo gel splint.

Note: The diameter of the inner and outer rings of the gobo, the size and

thickness of the gobo gel splint are shown in the following figure:

Distance(m)

2 4 6 8

Diameter(m)

CW/WW 1.31 2.59 3.91 5.19

Diameter(m)

CW/WW 1.87 3.73 5.59 7.46

Diameter(m)

CW/WW 0.68 1.34 2.01 2.68

Diameter(m)

CW/WW 0.94 1.85 2.78 3.70

1170 290 130 70

1010 250 112 62

1842 461 205 115

1950 488 215 121

2920 730 322 180

2758 680 310 170

596 150 66 37

517 130 56 32

The Color Gel Splint Installation

At first, please push the Lock Cap button by hand as the arrow, and move

away the Lock as the arrow, then insert the color gel splint into the inside

slot from topside, and fasten the lock.

How To Change The Focus Lens

At first, please push the screws on both side of the fixture by hand as the

arrow, and move away the focus lens silently by hand as the arrow.

Then insert the focus lens as the arrow silently, and insert the screws in

place by hand as the arrow, and fasten the lens.

Installation

First fix the track on the ceiling with the screws，put the dial on “OFF” of

the twist switch and rotate the tumbler switch 90 degrees clockwise.

Three wire Connector

Tumbler Switch

Twist Switch OFF：

Tumbler Switch:

Twist Switch

Rotae 90degreesclockwise

Put the three wire connector into the track groove, the lamp body is fixed.

Then rotate the tumbler switch 90 degrees counter clockwise and make

sure the twist switch on“ON”.

After the lamp body is fixed, it can be energized.

Reference Diagram for choice of connectors

Troubleshooting

The fixture does not work, no light

1. Check the connection of power and main fuse.

2. Measure the mains voltage on the main connector.

Fixture Cleansing

The cleaning of internal and external optical lenses and/or mirrors must be

carried out periodically to optimize light output. Cleaning frequency

depends on the environment in which the fixture operates: damp, smoky

or particularly dirty surrounding can cause greater accumulation of dirt on

the unit’s optics.

Clean with soft cloth and use normal glass to clean liquid.

Always dry the parts carefully.

Clean the external optics at least every 20 days. Clean the internal

optics at least every 30 days.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels ACME Équipement d'éclairage

ACME

ACME iSolution Manuel utilisateur

ACME

ACME LS-1005 Manuel utilisateur

ACME

ACME Xperior 700SZ Spot Manuel utilisateur

ACME

ACME Xperior 1500SZ Manuel utilisateur

ACME

ACME LED-HC101 II Manuel utilisateur

ACME

ACME XP-5000WZ Manuel utilisateur

ACME

ACME Spider FC Manuel utilisateur

ACME

ACME STAGE PAR 100 COLOUR IP Manuel utilisateur

ACME

ACME LED-0408 Manuel utilisateur

ACME

ACME Theatre Spot 150m Manuel utilisateur

ACME

ACME LED-900 A Manuel utilisateur

ACME

ACME ANIMA C Manuel utilisateur

ACME

ACME BIG BANG Manuel utilisateur

ACME

ACME Solar Flare Manuel utilisateur

ACME

ACME ENERGY SPOT XA-400 SPOT Manuel utilisateur

ACME

ACME TV LIGHT PANEL 2000 Manuel utilisateur

ACME

ACME Sandane Manuel utilisateur

ACME

ACME Energy Spot PRO Manuel utilisateur

ACME

ACME CHIRON Manuel utilisateur

ACME

ACME Dynamic 25 Spin LED?GF25 Manuel utilisateur

ACME

ACME Dragon Scan 50 LED-SC50B Manuel utilisateur

ACME

ACME LED-767 RGBW Manuel utilisateur

ACME

ACME IL-2420 II Manuel utilisateur

ACME

ACME SAMURAI SCAN 50 Manuel utilisateur

Manuels Équipement d'éclairage populaires d'autres marques

Brizo

Brizo 8SP-MU-4 Manuel utilisateur

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manuel utilisateur

IKEA

IKEA BJÖRKSPIREA Manuel utilisateur

Laserworld

Laserworld Evolution Series ES-400RGB Manuel utilisateur

Alien

Alien RG STAR Manuel utilisateur

EuroLite

EuroLite LED B-40 Manuel utilisateur

Qazqa

Qazqa Suplux SL 3 Black 103062 Manuel utilisateur

Commercial Electric

Commercial Electric 54568141 Manuel utilisateur

CREE LIGHTING

CREE LIGHTING 304 Series Manuel utilisateur

Goobay

Goobay 49867 Manuel utilisateur

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manuel utilisateur

Alkalite

Alkalite Krypton KT-81 Manuel utilisateur

Clas Ohlson

Clas Ohlson GU10 Manuel utilisateur

DTS

DTS DELTA 10 F Manuel utilisateur

ring

ring Solar Steplight Manuel utilisateur

One Stop Gardens

One Stop Gardens 57696 Instructions de montage

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manuel utilisateur

SIREM

SIREM Swimeo A2 Manuel utilisateur