Zte MC7010 Manuel utilisateur
MC7010
Quick Start Guide
EN 1
FI 25
SV 52
NO 79
DK 106
Scan this QR code to download the Install Helper
application.
1
LEGAL INFORMATION
Copyright © 2021 ZTE CORPORATION
All rights reserved.
No part of this publication may be excerpted, reproduced, translated or utilized in
any form or by any means, electronic or mechanical, including photocopying and
microlm, without the prior written permission of ZTE Corporation.
This document is published by ZTE Corporation. We reserve the right to make
modications on print errors or update.
Version No.: R1.0
Unpacking and Preparations
Before installing the device, make sure that all items listed in the packing list are
present. If something is missing or damaged, please contact ZTE technical support.
Packing List
The MC7010 ODU CPE The Quick Start Guide 1 Cover plate set(POE
adapter):
Anti-theft screw * 2, Screw
anti-theft key * 1
2
Mounting Kit: Metal
bracket, Backplane,
Metal clamp, M6
expansion bolts & M6
expansion spigots*4, M3
crosshead screws*5
1 POE adapter and AC
Power cord
1 long network cable(for
connecting the device
and POE adapter), 1
short network cable for
connecting the POE
adapter and PC/Router),
RJ45 socket*2
Prepare the following accessories (not included):
• Crosshead screwdriver
• Flat head screwdriver
• Hammer drill
• Marker pens
Installation Precautions
• Do not install the device in the following directions:
Do not install the device
with the interface side
facing upwards.
Do not install the device
horizontally.
Do not install the device
tilted.
WARNING!
The device must be installed downwards and vertically. It is not recommended
to install the device in other directions (including but not limited to the above
3
scenarios). ZTE is not liable for any problem caused by the installation in other
incorrect directions.
• Do not install the device at a high position (lightning area).
• The device must be placed in a well-ventilated environment for use. If possible,
install the device in a place with less direct sunlight, for example, in the shade.
The device must not be installed at the outlet of the exhaust pipe, or installed
in a place where water passes through, for example, a rain shed.
• The device shall be installed in the position of the site survey design drawings
and within the protection range of 45° of the lightning rod. In high mountains
and areas with heavy lightning (the number of thunderstorm days per year
exceeds 180), ensure that the device is within the protection range of 30°of the
lightning rod.
• When the device is mounted on the wall, it should better be more than 1 m
away from the grounding cable of the lightning rod and more than 20 cm away
from the lightning protection zone.
• When installing the device against a pole, do not install a lightning rod on the
pole. It is recommended that an independent lightning rod be installed near
the pole. If a lightning rod is installed on the pole, it is recommended that the
lightning rod be led out and grounded directly.
• The mounting pole must be rm, cannot be shaken and must meet the wind-
resistant requirements (not less than level-10 wind speed).
• The mounting pole should be vertical, and the vertical error should be less
than ±2°.
Installation Modes
You can install the device in either of the following ways:
Install the device on a wall. Install the device against a pole.
4
Requirements of Installation Space and Medium
• Installation space requirements
• Installation medium requirements
Mounting pole
5
Recommended Installation Locations
6
Installing the nano-SIM Card
Insert the nano-SIM card to the SIM card slot as shown.
WARNING!
Your device does not support (U) SIM cards, micro-SIM cards or any other non-
standard SIM cards. To avoid damage to the device, do not use those cards or any
card holders.
Installing the Network Cable
1. Connect the RJ45 to the network port on the MC7010 while the two screws are
also inserted into the holes at the bottom of the device.
7
2. Push the cover plate upwards until it is secured, and use a screw anti-theft
removal wrench to install the cover plate on the device.
NOTES:
If the mains cable is more than 0.8m visible outside the house after installation, it
must be attached to a wall or rod to avoid damage.
Autres manuels pour MC7010
2
Table des matières
Langues :
Autres manuels Zte Routeur sans fil
Zte
Zte Telstra MF985T Manuel utilisateur
Zte
Zte MC7010 Manuel utilisateur
Zte
Zte ZXHN F680 Manuel utilisateur
Zte
Zte MF10 Manuel utilisateur
Zte
Zte MF920U Manuel utilisateur
Zte
Zte MF63 Manuel utilisateur
Zte
Zte mf910l Manuel utilisateur
Zte
Zte Unite III Manuel utilisateur
Zte
Zte MC801A Manuel utilisateur
Zte
Zte MF91D Manuel utilisateur
Zte
Zte AT&T Velocity MF923 Manuel utilisateur
Zte
Zte MC801A Manuel utilisateur
Zte
Zte Centinel MF275/9 Manuel utilisateur
Zte
Zte MF985 Manuel utilisateur
Zte
Zte Unite II Manuel utilisateur
Zte
Zte mobile hotspot Manuel utilisateur
Zte
Zte ZXV10 W300 Instructions d'utilisation et d'entretien
Zte
Zte MF60 Manuel utilisateur
Zte
Zte 4G LTERouter with Voice Manuel utilisateur
Zte
Zte MF60 Manuel utilisateur
