Zte MF253V Manuel utilisateur
MF253V
Let’s go
Getting started with your device
ZTE CORPORATION
NO. 55, Hi-tech Road South, ShenZhen, P.R.China
Postcode: 518057
Tel: +86-755-26779999
URL: www.ztedevice.com
E-mail: mobile@zte.com.cn
2
LEGAL INFORMATION
Copyright © 2019 ZTE CORPORATION.
All rights reserved.
No part of this publication may be excerpted, reproduced, translated or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without the prior written permission of
ZTE Corporation.
The manual is published by ZTE Corporation. We reserve the right to make modifications on print errors
or update specifications without prior notice.
Version No. : R1.0
Edition Time: March 4, 2019
3
Getting to Know Your Device
Appearance
NOTE:
Please use the original external antenna if necessary.
Interface Description
USB jack
Insert the device to USB interface.
LAN
• Ethernet connections to computer in Wireless Broadband
mode.
• Connect to the Internet in Cable Broadband mode.
Phone
Standard RJ11 connector for telephone.
Reset
Restore factory default configurations.
WPS button
Start Wi-Fi Protected Setup authentication process.
Power socket
Connector to the external power supply.
On/Off
Turn the router on or off.
4
Indicators
Indicator
State
Description
POWER
Blue on
Power is on and external power supply is
working normally.
Off
Power is off or external power supply is
working abnormally.
WIFI
Blue on
Wi-Fi works normally with no data
transmission.
Blue blinking
Wi-Fi works normally with data
transmission.
Off
Wi-Fi works abnormally or the Wi-Fi
function is disabled.
PHONE
Off
The phone is not in use.
Blue blinking
The phone is ringing.
Blue on
The phone is in calling.
SIG
Blue on
Signal strength is very good or good.
Blue blinking
Signal strength is weak.
Off
There is no signal.
2G/3G/4G
Red
The device is turned on but not registered to
the mobile network.
Blue blinking
The device is connected to the 4G/LTE
network and data is being transferred.
Blue solid
The device is registered to the 4G/LTE
network.
Green blinking
The device is connected to the 2G/3G
network and data is being transferred.
Green solid
The device is registered to the 2G/3G
network.
Green on
The LAN port is connected.
Green blinking
The LAN port is connected with data
5
Indicator
State
Description
LAN
transmission.
Off
The network cable is not connected.
NOTE:
The phone function needs the network support.
Connecting Your Device
Follow the picture to connect your device.
Please refer to the chapter “Accessing the Internet”. If you want to use the mobile network to
connect to the Internet or use your home phone, you need insert your (U)SIM card first.
CAUTION:
Put your device at least 2 meters away from the connected phone, TV sets, radio and other electronic devices
to avoid electromagnetic interference.
6
Configuring Your PC
The following procedure describes how to configure the Internet Protocol in the Windows 7 for your Wi-
Fi connection.
1. Right-click Network and select Properties.
2. Select Change adapter settings.
3. Right-click Wireless Network Connection and select Properties.
4. Select Internet Protocol Version 4 (TCP/IPv4) and click Properties.
7
5. Select Obtain an IP address automatically and Obtain DNS server address automatically, and
click OK.
8
Accessing the Internet
Before accessing the Internet, please make sure that the following operations are finished.
• Your device is connected via a network cable or Wi-Fi.
• Your PC is configured.
To access the Internet:
Log in the CPE configuration page.
1. Launch the Internet browser and enter http://192.168.0.1 in the address bar. The login page
appears.
2. Input the password and then click Login. The default password is admin.
3. View the current mode on the left top of the CPE configuration page, and then click Change.
4. Select an operation mode which you want to use and then click Apply.
9
NOTE:
If you change the operation mode, the device will be restarted automatically.
5. Set the detail parameters for the operation mode.
Voice Function
Making a Call
You can make a call through (U)SIM card.
1. Pick up the handset.
2. Key in the telephone number.
3. You can either press the # key on the telephone to send the call, or wait 4～8 seconds for the call to be
connected automatically.
The call will be connected.
NOTE:
If there is no signal indication, the radio signal is unavailable. Change the location of the device and make
sure nothing is blocking it.
Answering a Call
When the phone rings, pick up the handset to answer it. If the telephone has hands-free function you also
can answer the call by pressing the Hands-free button. Press the Hands-free button again to end the call.
WPS Function
Your device supports WPS function. You can use this function to connect the client to your device.
10
1. Power on your device, and enable the Wi-Fi function on your device.
2. Enable the WPS function. Please check the WPS Setting on the CPE Configuration Page.
3. Press the WPS button on your device to start Wi-Fi Protected Setup authentication process.
4. Enable the WPS function on your client to respond to this authentication process.
5. Follow the system prompts on your client to finish the connection.
Wireless Connection (Optional)
If you want to use Wi-Fi to connect your device, please refer to the following steps.
1. Make sure that the Wi-Fi works normal. Please check the Wi-Fi Setting on the CPE configuration page
or check the Wi-Fi indicator.
2. Power on your device. Use the Wi-Fi application on a client to search for available wireless networks.
NOTE:
Set the client to obtain an IP address automatically. For the detailed procedure, refer to Configuring Your
PC. The client gets an IP address, for example, 192.168.0.101.
3. Select the SSID (wireless network name) of your device, and then click Connect.
NOTE:
Autres manuels pour MF253V
1
Table des matières
Autres manuels Zte Routeur sans fil
Zte
Zte MF60 Manuel utilisateur
Zte
Zte MF51 Manuel utilisateur
Zte
Zte MF65 Manuel utilisateur
Zte
Zte MF29 Manuel utilisateur
Zte
Zte MF971L Instructions d'installation
Zte
Zte Z288L Manuel utilisateur
Zte
Zte Telstra MF90 Manuel utilisateur
Zte
Zte MF65 Manuel utilisateur
Zte
Zte Z289L Manuel utilisateur
Zte
Zte MF970 Manuel utilisateur
Zte
Zte MF910 Manuel utilisateur
Zte
Zte Verizon 4G Manuel utilisateur
Zte
Zte MF910 Manuel utilisateur
Zte
Zte MF23 Manuel utilisateur
Zte
Zte MF937 Manuel utilisateur
Zte
Zte O2 MF60 Manuel utilisateur
Zte
Zte WF821E Manuel utilisateur
Zte
Zte MF612 Manuel utilisateur
Zte
Zte MC801A Manuel utilisateur
Zte
Zte Z6200 Instructions originales
