Zte Z Manuel utilisateur

ZTE MF50

Quick Guide

ZTE CORPORATION

NO. 55, Hi-tech Road South, ShenZhen, P.R.China

Postcode: 518057

Tel: +86-755-26779999

URL: http://www.zte.com.cn

E-mail: mobile@zte.com.cn

LEGAL INFORMATION

No part of this publication may be excerpted, reproduced, translated or utilized in any form or by

any means, electronic or mechanical, including photocopying and microfilm, without the prior

written permission of ZTE Corporation.

The manual is published by ZTE Corporation. We reserve the right to make modifications on print

errors or update specifications without prior notice.

Version No. : R1.0

Confidential and Proprietary Information of ZTE CORPORATION 1

Quick Guide

Introduction

ZTE MF50 is a 3G mobile hotspot device, working in GPRS/EDGE/WCDMA/HSPA network. It provides

Internet connection via USB or Wi-Fi to clients, enabling you to communicate anytime and anywhere.

Specification

Data Service

HSPA:

DL 14.4 Mbps

UL 5.76Mbps

WCDMA CS: UL 64kbps/DL 64kbps

WCDMA PS: UL 384kbps/DL 384kbps

Interface

USB and Wi-Fi

Wi-Fi Standard

802.11b/g/11n

Wi-Fi Security

WEP/WPA/WPA2

USB Version

USB 2.0 HIGH SPEED

USB Interface Type

Micro USB

Weight

80g

Dimensions (W×H×D):

101.8mm*51.8mm*13.65mm

microSD card

Support up to 32GB microSD card

Battery

1500mAh Li-ion battery

*Standby time

100 hours

*Working time

4 hours

Charge time

3 hours

Operate system

Windows 7, Windows Vista, Windows XP (SP2 or later), Mac OS (10.4 or later)

Web Browser

IE (6.0 or later), Firefox (1.0 or later), Opera (6.0 or later), Safari (3.0 or later), Chrome

(6.0 or later)

Working temperature

-10℃~ +45℃

Storage temperature

-20℃~ +70℃

Charging temperature

0℃~ +40℃

2 Confidential and Proprietary Information of ZTE CORPORATION

Humidity

5%~ 95%

Notes:

microSD is a trademark of SD Card Association.

The device’s standby and working time are only for your reference, and based on ideal working

environment.

Getting to Know Your Device

The following figure shows the appearance of the device. It is only for your reference. The actual device

may be different.

Interface and Buttons

1.Power

Hold the Power button to switch on/off the device.

2. Internet

Press to connect to or disconnect from the Internet.

Hold for about five seconds to change between manual and automatic

connection.

3.WPS

This button is used to start Wi-Fi Protected Setup authentication process and

enable/disable the Wi-Fi function.

Hold it for about five seconds to activate the WPS process.

Hold it for about two seconds to enable/disable Wi-Fi function.

4. LED Screen

It is to indicate the signal type, signal strength, battery, Wi-Fi, etc.

5.Charger/USB

port

Charge your device.

Connect the client to your device via USB cable.

Notes:

•Press WPS and Power buttons simultaneously, and hold on about three seconds until all LEDs are off,

then release the buttons, the device will restart automatically and restore to the factory default settings.

•Please use the original external antenna if necessary.

Confidential and Proprietary Information of ZTE CORPORATION 3

LED Indicator

When the device is powered on, the following icons will appear on the OLED screen, with the

corresponding indications listed in the table below:

Icon

Indication

Network signal strength.

Network type. 2G or 3G icon will appear on the OLED screen according to the network

being connected.

Roaming network indication.

Connect to the Internet automatically.

Connect to the Internet manually.

Wi-Fi status and number of the connected users.

Battery power indication.

Hardware Installation

Inserting SIM Card, Memory Card and Battery

1. Use the thumb catch on the device to open the battery cover.

2. Insert SIM Card into the slot.

4 Confidential and Proprietary Information of ZTE CORPORATION

Warning:

Please power off the device and remove the external power adapter before removing or inserting the

SIM card, if not, the device or SIM card may be damaged.

3. Insert the memory card into the memory card holder.

4. Insert the battery as shown with the contacts located against the gold springs.

5. Line the battery cover up correctly and press gently to close the case.

Confidential and Proprietary Information of ZTE CORPORATION 5

Switching On/Off Your Device

Press and hold the Power button to switch on/off the device.

Notes:

Please install battery before power on.

Charging Your Device

1. Insert the charger lead carefully with the correct orientation to the charger port.

The plug only fits one way. Do not use excessive force to insert the plug.

2. Connect the charger to a mains socket.

3. Disconnect when the battery is fully charged.

Working Mode

Your device supports three working modes. For the client, we only use PC or laptop as the example in this

document.

USB Mode: Connect the device to your PC or laptop via the included USB cable, then power on your

device. And the following picture is one application example:

Wi-Fi Mode: Power on directly, and then connect the device to your PC or laptop via Wi-Fi. And the

following picture is one application example:

6 Confidential and Proprietary Information of ZTE CORPORATION

Mixed Mode: Connect to the device with the above two connection methods.

The following picture is the application example. All of the client devices can surf on the Internet at the

same time.

Establish a connection between your device and the client

Via USB Cable

1.Connect your device and the client with the USB cable.

2.Install software.

After the installation, the connection between your device and the client will be established successfully a

moment later.

Via Wi-Fi

1. Power on your device directly. It will take 1~2 minutes to initialize, and then Wi-Fi status icon will

appear on the screen of your device.

2. If the Wi-Fi status shown is , hold the WPS key for about 2 seconds to enable the Wi-Fi function.

3. Use your normal Wi-Fi application on the client to search the available wireless network.

Notes: You need to check your Wireless Network Connection. Set the client to obtain an

IP address automatically in the Internet protocol (TCP/IP) properties, and the client will get

an IP address like”192.168.0.101”.

4. Select the SSID of your device, and then click Connect.

Confidential and Proprietary Information of ZTE CORPORATION 7

Notes:

There will be a pop-up window to require the password. Please check the label on the battery

compartment of your device to gain the SSID and preset password information.

5. Wait a moment, the connection between your device and the client will be established successfully.

Access the Internet

1. Switch on the device.

2. Establish a connection between your device and the client.

3. After successfully establishing the connection, access the Internet in the Always On or

Manual mode. The default mode is Manual.

Notes:

You can browse the WebGUI Configuration page and click WAN Connection to set the WAN connection

mode.

Access the WebGUI Configuration Page

1. Make sure the connection between your device and the client is correct.

2. Click to Launch the internet browser.

Notes:

It is recommended that you use IE (6.0 or later), Firefox (1.0 or later), Opera (6.0 or later), Safari (3.0

or later), Chrome (6.0 or later)

3.The login page appears as follows.

8 Confidential and Proprietary Information of ZTE CORPORATION

4.View the information of WAN, WLAN and Device. Input the case-sensitive default password

“admin”, and then click Login to access the WebGUI Configuration page.

Notes:

•Do not put anything on the top of your device. Do not lay devices to overlap each other when using.

•The device takes 1~2 minutes to initialize, and attach to the network.

PIN Code Verification

If the PIN code of your SIM card is enabled, you will need to input the PIN code when you login at the

first time.

Notes:

The SIM card will be locked if you enter wrong PIN code consecutively for three times.

If you want to modify the PIN Status, please select Settings > Advanced > PIN Manage to do the

actions.

Quick Setup

After logging in, select Quick Settings, and then the Quick Settings wizard appears.

Table des matières

Manuels Routeur sans fil populaires d'autres marques

Milesight

Milesight UG67 Manuel utilisateur

Airlogic

Airlogic AirSync Class 1 Manuel du propriétaire

Samsung

Samsung WCH730B Manuel utilisateur

TELEFONICA

TELEFONICA USB Adapter Manuel utilisateur

NETGEAR

NETGEAR PowerLINE WiFi 1000 Series Manuel utilisateur

Askey

Askey RAC2V1K Manuel utilisateur

Alloy

Alloy WLF2454AP-S Manuel utilisateur

TP-Link

TP-Link TL-WR542G Manuel utilisateur

NETGEAR

NETGEAR WNR2000v4 Manuel utilisateur

Hama

Hama 53120 Manuel utilisateur

Intellinet

Intellinet 524582 Manuel utilisateur

Asus

Asus RT-N10P Manuel utilisateur

D-Link

D-Link DIR-506L Manuel utilisateur

Sapido

Sapido GR297n Manuel utilisateur

Asus

Asus DSL-N55U Manuel utilisateur

AMTC

AMTC WR7502 Manuel utilisateur

Compaq

Compaq CP-2W - iPAQ Connection Point Manuel utilisateur

SMC Networks

SMC Networks WBR14-N2 FICHE Manuel utilisateur

Zte z Manuel utilisateur

Manuels Routeur sans fil populaires d'autres marques