Zte MF65 Manuel utilisateur

Autres manuels pour MF65

7

Table des matières

Autres manuels Zte Routeur sans fil

Manuels Routeur sans fil populaires d'autres marques

Milesight

Milesight UG67 Manuel utilisateur

Airlogic

Airlogic AirSync Class 1 Manuel du propriétaire

Samsung

Samsung WCH730B Manuel utilisateur

TELEFONICA

TELEFONICA USB Adapter Manuel utilisateur

NETGEAR

NETGEAR PowerLINE WiFi 1000 Series Manuel utilisateur

Askey

Askey RAC2V1K Manuel utilisateur

Alloy

Alloy WLF2454AP-S Manuel utilisateur

TP-Link

TP-Link TL-WR542G Manuel utilisateur

NETGEAR

NETGEAR WNR2000v4 Manuel utilisateur

Hama

Hama 53120 Manuel utilisateur

Intellinet

Intellinet 524582 Manuel utilisateur

Asus

Asus RT-N10P Manuel utilisateur

D-Link

D-Link DIR-506L Manuel utilisateur

Sapido

Sapido GR297n Manuel utilisateur

Asus

Asus DSL-N55U Manuel utilisateur

AMTC

AMTC WR7502 Manuel utilisateur

Compaq

Compaq CP-2W - iPAQ Connection Point Manuel utilisateur

SMC Networks

SMC Networks WBR14-N2 FICHE Manuel utilisateur

1

ZTE MF65

Let’s go

Getting Started With Your Device

2

LEGAL INFORMATION

Copyright © 2014 ZTE CORPORATION.

All rights reserved.

No part of this publication may be excerpted, reproduced,

translated or utilized in any form or by any means, elec-

tronic or mechanical, including photocopying and microlm,

without the prior written permission of ZTE Corporation.

The manual is published by ZTE Corporation. We reserve

the right to make modifications on print errors or update

specications without prior notice.

Version No.: R1.0

NOTE:

Do not use the device in an enclosed environment or where

heat dissipation is poor. Prolonged work in such space

may cause excessive heat and raise ambient temperature,

which may lead to automatic shutdown of the device for

your safety. In the case of such event, cool the device in a

well-ventilated place before turning on for normal use.

3

Getting to Know Your Device

Appearance

The following gure is for your reference only.

1. LED indicator

2. Power button

3. WPS button

4. Micro USB port

5. microSDHC card slot

6. (U)SIM card slot

NOTE:

The microSDHC™ logo is a trademark of SD-3C,

LLC.

4

Indicators

Indicator Status Description

Network

Red solid

Error status. Not registered to

the mobile network, no (U)SIM

card inserted or no network

service available.

Green solid Registered to the mobile

network.

Green

blinking

Connected to the mobile

network and data is being

transferred.

Wi-Fi

Blue solid Wi-Fi is active.

Blue

blinking WPS is active.

LED light off Wi-Fi is off or your device is in

sleep mode.

5

Battery

Red solid/

blinking

The battery is low. Please

charge the battery.

Green

blinking The battery is being charged.

Green solid The battery level is middle or

high.

LED light off

Your device is in standby mode

and not being charged, or the

battery is not inserted.

Connection Scenario

Your device allows you to use your (U)SIM card to connect

to the Internet and supports multi-clients for surng on the

Internet at the same time. The following gure is only for

your reference.

6

Installing Your Device

1. Slide the back cover and remove it.

2. Install the SIM card.

IMPORTANT:

Your device does not support the Micro/Nano SIM card or

any other nonstandard SIM cards. To avoid damaging the

device, do not use those cards or any card holders.

7

3. Insert the microSDHC card if necessary.

4. Install the battery.

5. Close the back cover.

8

Using Wi-Fi

1. Power on your device.

2. Use the Wi-Fi application on a client to search for avail-

able wireless networks.

NOTE:

Set the client to obtain an IP address automatically. For the

detailed procedure, refer to Conguring Your PC. The client

gets an IP address, for example, 192.168.0.101.

9

3. Select the SSID of your device, and then click Connect.

NOTE:You can nd the default SSID on the label of your

device.

4. Enter the password, and then click Connect.

NOTE: You may need to enter the password for the Wi-Fi

connection. You can view the label on your device to get

the default password.

10

5. Wait until the client is connected to your device suc-

cessfully.

Using a USB Cable

1. Connect a client to your device through a USB cable.

2. Power on your device. The operating system detects

and identies new hardware, and automatically nishes

the installation.