ZALMAN CNPS7700 LED Manuel utilisateur

User’s Manual

CNPS7700 Series

www.ZALMAN.com

V 2.1

Intel Socket 1155/1156/775 CPUs

Core i7

Core i5

Core i3

Core 2 Quad

Core 2 Duo

Pentium Dual Core

Pentium D

Pentium 4

Celeron D

AMD Socket 754/939/940 CPUs

Athlon 64

Athlon 64 X2

Athlon 64 FX

Opteron

Dual-Core Opteron

Sempron

To ensure safe and easy installation,

please read the following precautions.

.COM

2. Speciﬁcations

Model

Spec.

CNPS7700-Cu

CNPS7700-Cu LED

CNPS7700-AlCu

CNPS7700-AlCu LED

Materials Pure Copper Pure Copper and

Aluminum

Weight 918g 600g

Dimensions 136(L) Ⅹ136(W) Ⅹ67(H)㎜

Fan

Bearing-Type 2 Ball-Bearing

RPM 1,000 ~ 2,000rpm ±10%

Noise Level 20 ~ 32dBA ±10%

Input Voltage 12V

Fan

Mate 2

Output Voltage 5V ~ 11V ±2%

Maximum Capacity Up to 6W

1. Precautions

1) Use and keep product away from reach of children and pets.

2) Do not ingest the Thermal Grease, and avoid its contact with skin and

eyes. If contact is made with skin, wash off with water. If ingested or

irritation persists, seek medical attention.

3) To prevent possible injuries, gloves must be worn while handling this

product.

4) Excessive force exerted on the fan may cause damage to the fan and/

or system.

5) Avoid inserting objects or hands into the fan while it is in operation to

prevent product damage and injuries.

6) Check the components list and condition of the product before

installation. If any problem is found, contact the retailer to obtain a

replacement.

7) Zalman Tech Co., Ltd. is not responsible for any damages due to

overclocking.

8) During transportation of the system, the cooler must be removed.

Zalman is not responsible for any damages that occur during the

transport of a system.

9) Product design and specifications may be revised to improve quality

and performance.

Disclaimer) Zalman Tech Co., Ltd. is not responsible for any damages due

to external causes, including but not limited to, improper use,

problems with electrical power, accident, neglect, alteration,

repair, improper installation, or improper testing.

.COM

3. Components

S-Type Grips

L-Type Grips

User’s Manual

Thermal Grease

Clip Support

Clip Support Fixing Bolts

Washers

Nuts

AMD Backplate Backplate Fixing Bolts Washer Plate

Fan Mate 2 Cable

Fan Mate 2 Double-Sided Tape

1) Common Components

2) Intel Components

3) AMD Components

Socket 1155 / 1156 / 775

Socket 754 / 939 / 940

Cooler

.COM

4. Installation Requirements

1) Space Requirements

2) Compatible CPUs

The cooler’s installation requires unobstructed space with dimensions of

136㎜(width), 136㎜(height), 70㎜(depth), and the CPU as a central

reference point. Please check if components such as ODDs and PSU protrude

into the required space.

①Intel Socket 1155 / 1156 / 775 CPUs

②AMD Socket 754 / 939 / 940 CPUs

Core i7 / i5 / i3 Core 2 Quad Core 2 Duo

all clock speeds all clock speeds all clock speeds

Pentium 4 Celeron D

Prescott Cedar Mill

up to 540 up to 650 all clock speeds

Athlon 64 FX Athlon 64 X2 Athlon 64 Sempron

up to 53 up to 5600+ all clock speeds all clock speeds

136㎜

70㎜

136㎜

.COM

1) Intel Socket 1155 / 1156 / 775 Installation

①Install the Clip Support to the motherboard according to the socket-type.

5. Installation

②Clear off any particles or residue from the CPU’s surface then spread

a thorough layer of Thermal Grease on the CPU and the base of the

cooler.

▶Please make note of the Lever Slot’s direction when

installing the Clip Support.

Caution

Nut

Washer

Bolt(silver)

Clip Support

M/B

Socket 1155 / 1156

Socket 775

Lever

Slot

.COM

2) AMD Sockets 754 / 939 / 940 Installation

③Install the S-Type Grips to both sides of the Clip and fasten Bolts through

the holes of the Grips onto the Clip Support.

①Install the AMD Backplate to the motherboard using Washers and

Backplate Fixing Bolts.

Backplate Fixing Bolt

Washer

AMD Backplate

M/B

②Clear off any particles or residue from the CPU’s surface then spread

a thorough layer of Thermal Grease on the CPU and the base of the

cooler.

.COM

③Install the L-Type Grip to both sides of the Clip and fasten Bolts through

the holes of the Grips onto the Clip Support.

①Connect Fan Mate 2 between the

Fan Cable and the motherboard

as shown in the diagram below.

②Fan Mate 2 can be installed to the

side of the case using Double-Sided

Tape.

M/B

Fan Connector (Cooler)

Double-Sided Tape

6. Fan Mate 2 Installation and Usage

1) Fan Mate 2 Installation

2) Fan Mate 2 Operation

Adjust the Fan Speed Control

Knob for RPM control.

Fan Speed Control Knob

In the case that you get a BIOS error beep:

①Rotate the Fan Speed Control Knob clockwise to the maximum setting.

②Disable CPU Fan Detected in BIOS setting or set the system monitoring

program’s CPU Fan RPM to the lowest setting.

※Certain motherboards will not boot if the CPU fan’s RPM is not detected. In this

case inquire to the motherboard’s manufacturer for additional details.

BIOS Booting Error

.COM

GS1000 / GS1000SE

•E-ATX / Standard ATX / microATX Compatible

* Supports Intel Dual Xeon server motherboards

•UP to 6 Hot Swap HDD Bays

* GS1000(3 Standard / 3 Optional)

* GS1000 SE(Optional)

•Tool-Free HDD Installation

•Airﬂow Optimized Design

•Vibration Absorbing HDD Dampers and Feet

•The World’s First Roller Rails for Smooth

& Easy PSU Installation

•Cable Compartment Behind the Motherboard

for Cable Management

•Dedicated Fan Compartment for Fanless PSU Users

•Up to a Total of 8 HDD Bays

* 2 Adaptors & Bezels included for use of two 5.25”bays as 3.5”Internal(HDD)/

External(FDD) Bays

GT1000

•High-End Gaming Enclosure Built with Sturdy

All Aluminum Panels

•Three Tool-Free Hinged Magnetic Panels

(2 Left, 1 Right) for Easy Installation and

Access to Components

•Tool-Free Installation of Disk Drives,

Fan Controlles, Audio Interfaces etc.

•Accommodates up to 6 Hard Drives

•Luxurious and Cool Aesthetics.

•Color Option: Black (Red LED Fans),

Titanium (Blue LED Panel).

For more information, please visit our website.

Autres manuels pour CNPS7700 LED

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels ZALMAN Matériel informatique

ZALMAN

ZALMAN CNPS9700 LED Manuel utilisateur

ZALMAN

ZALMAN ZM-WB5 Plus Manuel utilisateur

ZALMAN

ZALMAN CNPS9900A LED Manuel utilisateur

ZALMAN

ZALMAN CNPS9500 AT Manuel utilisateur

ZALMAN

ZALMAN CNPS7500-Cu LED Manuel utilisateur

ZALMAN

ZALMAN ZM-RF1 Manuel utilisateur

ZALMAN

ZALMAN VF2000 LED Manuel utilisateur

ZALMAN

ZALMAN Optima CNPS8X Manuel utilisateur

ZALMAN

ZALMAN ZM-GWB3 Manuel utilisateur

ZALMAN

ZALMAN CNPS7000C Series Manuel utilisateur

ZALMAN

ZALMAN CNPS2005-Plus Manuel utilisateur

ZALMAN

ZALMAN ZM500-ST Manuel utilisateur

ZALMAN

ZALMAN CNPS17X Manuel utilisateur

ZALMAN

ZALMAN ZM-RWB1 Manuel utilisateur

ZALMAN

ZALMAN ZM-GWB2 Manuel utilisateur

ZALMAN

ZALMAN OPTIMA II CNPS10X Manuel utilisateur

ZALMAN

ZALMAN ZM80D-HP Manuel utilisateur

ZALMAN

ZALMAN ZM80D-HP Manuel utilisateur

ZALMAN

ZALMAN FX100 Manuel utilisateur

ZALMAN

ZALMAN CNPS8700 NT Manuel utilisateur

ZALMAN

ZALMAN CNPS9500 AT Manuel utilisateur

ZALMAN

ZALMAN CNPS5100-Al Manuel utilisateur

ZALMAN

ZALMAN CNPS9500 AM2 Manuel utilisateur

ZALMAN

ZALMAN RESERATOR1 V2 Guide de démarrage rapide

Manuels Matériel informatique populaires d'autres marques

EMC2

EMC2 VNX Series Manuel du propriétaire

Panasonic

Panasonic DV0PM20105 Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuel utilisateur

Raidon

Raidon iT2300 Manuel utilisateur

National Instruments

National Instruments PXI-8186 Manuel utilisateur

Hauppauge

Hauppauge WinTV-HVR-2250 Manuel utilisateur

Kontron

Kontron CP6002 Manuel utilisateur

Manhattan

Manhattan 702843 Manuel utilisateur

Aphex

Aphex 230 Manuel utilisateur

AMD

AMD Phenom II Manuel d'exploitation

Intel

Intel NUC 12 Pro Manuel utilisateur

dbx

dbx Zone Pro 1260 Manuel utilisateur

Galaxy

Galaxy GHDX2-2430S-24F4D Manuel utilisateur

Intel

Intel AXXRMFBU4 Manuel utilisateur

Kontron

Kontron DIMM-PC/MD Manuel utilisateur

ST X-NUCLEO-SAFEA1B Mode d'emploi

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuel utilisateur