WIKA IS-3 Manuel utilisateur

Operating instructions

Betriebsanleitung

Pressure transmitters model IS-3

Druckmessumformer Typ IS-3

Pressure transmitter model IS-3

2WIKA operating instructions pressure transmitter, model IS-3

14243628.02 10/2018 EN/DE

Betriebsanleitung Typ IS-3 Seite 59 - 115

WIKA®is a registered trademark in various countries.

WIKA®ist eine geschützte Marke in verschiedenen Ländern.

Prior to starting any work, read the operating instructions!

Keep for later use!

Vor Beginn aller Arbeiten Betriebsanleitung lesen!

Zum späteren Gebrauch aufbewahren!

Operating instructions model IS-3 Page 3 - 58

Further languages can be found at www.wika.com

3WIKA operating instructions pressure transmitter, model IS-3

14243628.02 10/2018 EN/DE

Contents

Declarations of conformity can be found online at www.wika.com.

1. General information 4

2. Safety 6

3. Specications 13

4. Design and function 32

5. Transport, packaging and storage 32

6. Commissioning, operation 33

7. Adjusting the zero point and span 45

8. Maintenance and cleaning 48

9. Faults 48

10. Dismounting, return and disposal 50

Appendix 1: Declaration of conformity 53

Appendix 2: FM, CSA control drawing 54

4WIKA operating instructions pressure transmitter, model IS-3

14243628.02 10/2018 EN/DE

1. General information

■

The pressure transmitter described in the operating instructions has been designed and manufactured using state-

of-the-art technology. All components are subject to stringent quality and environmental criteria during production.

Our management systems are certied to ISO 9001 and ISO 14001.

■

These operating instructions contain important information on handling the instrument.Working safely requires that

all safety instructions and work instructions are observed.

■

Observe the relevant local accident prevention regulations and general safety regulations for the instrument's range

of use.

■

The operating instructions are part of the product and must be kept in the immediate vicinity of the instrument and

readily accessible to skilled personnel at any time.

■

Skilled personnel must have carefully read and understood the operating instructions prior to beginning any work.

■

The manufacturer's liability is void in the case of any damage caused by using the product contrary to its intended

use, non-compliance with these operating instructions, assignment of insuciently qualied skilled personnel or

unauthorised modications to the instrument.

■

The general terms and conditions contained in the sales documentation shall apply.

■

Subject to technical modications.

■

Further information:

- Internet address: www.wika.de / www.wika.com

- Relevant data sheet: PE 81.58

- Application consultant: Tel.: +49 9372 132-0

Fax: +49 9372 132-406

info@wika.de

1. General information

5WIKA operating instructions pressure transmitter, model IS-3

14243628.02 10/2018 EN/DE

1. General information

Explanation of symbols

WARNING!

... indicates a potentially dangerous situation that can result in serious injury or death, if not avoided.

WARNING!

... indicates a potentially dangerous situation in the hazardous area that can result in serious injury or

death, if not avoided.

WARNING!

... indicates a potentially dangerous situation that can result in burns, caused by hot surfaces or liquids,

if not avoided.

CAUTION!

... indicates a potentially dangerous situation that can result in light injuries or damage to equipment or

the environment, if not avoided.

Information

... points out useful tips, recommendations and information for ecient and trouble-free operation.

6WIKA operating instructions pressure transmitter, model IS-3

14243628.02 10/2018 EN/DE

2. Safety

WARNING!

Before installation, commissioning and operation, ensure that the appropriate instrument has been

selected in terms of measuring range, design and specic measuring conditions.

Non-observance can result in serious injury and/or damage to the equipment.

WARNING!

Danger of injury and damage to property due to escaping media

Escaping media can lead to serious injury. In the event of failure, components can be ejected or media

exhausted under high pressure.

■

Open the connections only after the system has been depressurised.

■

For pressures from 1,000 bar, employ a protective device to prevent parts from being ejected.The

protective device must not be removable without the use of tools.

■

Always operate the pressure measuring instrument within the overload safety, see chapter 3 “Speci-

cations”.

■

Ensure that the pressure in the system as a whole does not exceed the lowest maximum pressure of

any of its components. If varying or dierent pressures are to be expected in the system, components

must be used that can withstand the maximum expected pressure spikes.

■

Installation in self-draining position (there must be no collection of liquid in the connection channel of

the transmitter).

■

Plant conditions which can lead to the formation of atomic hydrogen in the connection channel of the

transmitter must be completely avoided.

■

Observe the operating parameters in accordance with chapter 3 “Specications”.

■

Actions or alterations to the pressure transmitter, which are not described in these operating instruc-

tions, are not permitted.

Further important safety instructions can be found in the individual chapters of these operating instruc-

tions.

2.1 Intended use

The pressure transmitter is an intrinsically-safe supplied pressure measuring instrument and is used for the continuous

monitoring of gaseous media or liquids in potentially explosive areas which require category 1, 1/2 and 2 equipment.

7WIKA operating instructions pressure transmitter, model IS-3

14243628.02 10/2018 EN/DE

2. Safety

ATEX and IECEx approval

Pressure measuring instrument approved for use in hazardous areas.

EC-type examination certicate: BVS 14 ATEX E 035 X

Certicates IECEx: IECEx BVS 14.0030 X (Ex i), IECEx BVS 14.0109X (Ex nA and Ex tc)

Approval ratings ATEX and IECEx

Gases and mist: Mounting to zone 0 (EPL Ga/Gb); installation in zone 0 (EPL Ga) and zone 2 (EPL Gc)

Dusts: Mounting to zone 20 (EPL Da/Db); installation in zone 20 (EPL Da) and zone 22 (EPL Dc)

Mining: EPL Ma

CSA and FM approvals

Pressure transmitter approved for use in hazardous areas, in compliance with the corresponding certicates (see

control drawing no. 14137236). Control drawing, see appendix 2 “FM, CSA control drawing”.

CSA certicate: 70033893

FM certicate: FM17US0003

CSA approval ratings

PROCESS CONTROL EQUIPMENT - intrinsically safe, entity - for hazardous locations

IS: Class I, division 1, groups A, B, C and D; class II, groups E, F and G; class III

Canadian zone designation: Class I, zone 0; Ex ia; IIC; IP65; DIP A20

US zone designation: Class I, zone 0; AEx ia; IIC; IP65

PROCESS CONTROL EQUIPMENT - intrinsically safe and non-incendive equipment - for hazardous locations

NI: Class I, division 2, groups A, B, C and D; class II, division 2, groups F and G; class III

Canadian zone designation: Class I, zone 2; Ex nL; IIC; IP65; DIP A22

US zone designation: Class I, zone 2; AEx nL; IIC; IP65

PROCESS CONTROL EQUIPMENT - for hazardous locations

Class I, division 2, groups A, B, C and D

Canadian zone designation: Class I, zone 2; Ex nA; IIC; IP65; DIP A22

US zone designation: Class I, zone 2; AEx nA; IIC; IP65

8WIKA operating instructions pressure transmitter, model IS-3

14243628.02 10/2018 EN/DE

2. Safety

FM approval ratings

Intrinsically safe for class I, II, III division 1, groups A, B, C, D, E, F, and G hazardous (classied) locations, entity;

Intrinsically safe AEx ia for class I, zone 0, group IIC hazardous (classied) locations, entity;

Nonincendive for class I, II, III division 2, groups A, B, C, D, E, F, and G hazardous (classied) locations, NIFW;

Class I, zone 2, group IIC hazardous (classied) locations, NIFW;

Ingress protection of IP65 and a temperature class of T4, T5, and T6;

Control drawing 141137236 applies for all types of protection

IECEx addition for Australia

The pressure measuring instrument is approved for use in hazardous areas (certicate IECEx TSA 16.0004X available

on request via inf[email protected])

Standards used: IEC 60079-0:2011, IEC 60079-11:2011, IEC 60079-26:2006

The instrument has been designed and built solely for the intended use described here, and may only be used accor-

dingly.

The technical specications contained in these operating instructions must be observed. Improper handling or

operation of the instrument outside of its technical specications requires the instrument to be taken out of service

immediately and inspected by an authorised WIKA service engineer.

2.2 Personnelqualication

WARNING!

Risk of injury should qualication be insucient!

Improper handling can result in considerable injury and damage to equipment.

■

The activities described in these operating instructions may only be carried out by skilled personnel

who have the qualications described below.

■

Keep unqualied personnel away from hazardous areas.

Skilled personnel

Skilled personnel are understood to be personnel who, based on their technical training, knowledge of measurement

and control technology and on their experience and knowledge of country-specic regulations, current standards and

directives, are capable of carrying out the work described and independently recognising potential hazards.

Special operating conditions require further appropriate knowledge, e.g. of aggressive media.

9WIKA operating instructions pressure transmitter, model IS-3

14243628.02 10/2018 EN/DE

2. Safety

2.3 Special hazards

WARNING!

For ATEX/IECEx ignition protection types Ex nA and Ex tc: The thermal tests per EN 60079-0:2011

26.5.1 were carried out for operation in the nominal pressure range.

WARNING!

Observe the information given in the applicable type examination certicate and the relevant country-

specic regulations for installation and use in hazardous areas (e.g. IEC 60079-14, NEC, CEC).

Non-observance can result in serious injury and/or damage to the equipment.

WARNING!

Physical injury and damage to property caused by hair-line cracks

The service life of the pressure transmitter is limited by a maximum number of load cycles.The

maximum number depends on the pressure prole of the application (extent of change in pressure, time

of pressure rise and pressure drop, ...). Once the maximum number of load cycles has been exceeded,

it can lead to leaks through hair-line cracks, which can cause physical injury and damage to property.

■

Request the maximum number of load cycles from the manufacturer.

■

Replace the pressure transmitter once it has exceeded the maximum number of load cycles.

■

Take safety measures to eliminate hazards due to hair-line cracks.

WARNING!

For hazardous media such as oxygen, acetylene, ammable or toxic gases or liquids, and refrigeration

plants, compressors, etc., in addition to all standard regulations, the appropriate existing codes or regula-

tions must also be followed.

WARNING!

Residual media in the dismounted instrument can result in a risk to persons, the environment and

equipment. Take sucient precautionary measures.

Do not use this instrument in safety or emergency stop devices. Incorrect use of the instrument can

result in injury.

Should a failure occur, aggressive media with extremely high temperature and under high pressure or

vacuum may be present at the instrument.

Further important safety instructions can be found in the individual chapters of these operating

instructions.

10 WIKA operating instructions pressure transmitter, model IS-3

14243628.02 10/2018 EN/DE

2. Safety

2.4 Labelling, safety marks

Product label

Explanation of symbols

Before mounting and commissioning the instrument, ensure you read the operating instructions!

Safety-related maximum

values (for ignition protection

type Ex i)

Pin assignment

0158

IS 3

-30 inHg ... 300 psi

DC 10 ... 30 V

4 ... 20 mA

00639080

11639110

BVS 14 ATEX E 035 X

IECEx BVS 14.0030 X

II 1/2 G Ex ia IIC T4/T5/T6 Ga/Gb

II 1/2 D Ex ia III C T135 °C Da/Db

I M1 Ex ia I Ma

U+ bn

U- gn

Ui/Vmax = 30V

Ii/Imax = 100 mA

Pi = 800 mW

Ci ≤16,5 nF

Li = 0 µH

T6 at 60 °C

T5 at 75 °C

T4 at 105 °C

For dust see manual!

Shield not connected to the case

Code IS - 3 - X - XXXX- XXX - XXXXXXX - XXXXXXX - XXXX

WIKA Alexander Wiegand SE & Co. KG, 63911 Klingenberg Made in Germany 2F

Model designation

Measuring range

Output signal

Power supply

P# article no.

S# Serial no.

Model code

Ignition protection type

Coded date of manufacture

Autres manuels pour IS-3

Table des matières

Langues :

Autres manuels WIKA Émetteur

Manuels Émetteur populaires d'autres marques

NIVELCO

NIVELCO EasyTREK SCA-300 Series Manuel du propriétaire

Honeywell

Honeywell 5816WMBR Manuel utilisateur

Kamstrup

Kamstrup READy MTU Mode d'emploi

Omega

Omega ZW Series Manuel utilisateur

ABB

ABB Field 264H Mode d’emploi

Alinco

Alinco DJ-V17T Manuel utilisateur

Dejero

Dejero EnGo 3x Manuel utilisateur

Rosemount

Rosemount 4600 Manuel utilisateur

Speaka Professional

Speaka Professional 2342740 Manuel utilisateur

trubomat

trubomat GAB 1000 Manuel utilisateur

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Manuel utilisateur

Rondish

Rondish UT-11 Manuel utilisateur

MG 10JRE Manuel utilisateur

Burkert

Burkert 8177 Manuel utilisateur

Firetide

Firetide HotPort 3203 Manuel

Tele Radio

Tele Radio T9-02 Manuel utilisateur

Rotronic

Rotronic HygroFlex HF3 Series Manuel utilisateur

Jamara

Jamara FCX6 Pro Tel Manuel utilisateur