Viessmann Vitotronic 200 KW2 Manuel utilisateur

Vitotronic 300, type KW3

Vitotronic 200, type KW2

VITOTRONIC 200

VITOTRONIC 300

Operating instructions

for system users

Heating system with

weather-compensated digital boiler and heating circuit control

5592Ă363ĂGBăăă7/2002 Please eep safe

Introductory information

For your safety

Please follow these safety instructions closely to prevent accidents and

material losses.

If you smell gas

Ho not smoke! o not use naked

flames or cause sparks (e.g. by

switching lights or electrical

appliances on and off).

HOpen windows and doors.

HClose the gas shut-off valve.

HNotify your heating engineer/

installation contractor from outside

the building.

HObserve the safety regulations of

your gas supplier (see gas meter)

and of your heating engineer (see

commissioning/training report).

In an emergency

HImmediately isolate the mains

electrical supply, e.g. by removing

a separate mains fuse or by means

of a mains electrical isolator

(unless you smell gas).

HClose the shut-off valves of the

main fuel lines.

HIn case of fire, use an appropriate

fire extinguisher.

Wor on the equipment

Installation, initial start-up, inspection,

maintenance and repairs must only

be carried out by a competent person

(heating engineer/installation

contractor).

Before working on the equipment/

heating system, isolate the mains

electrical supply (e.g. by removing a

separate mains fuse or by means of a

mains electrical isolator) and safeguard

against unauthorised reconnection.

When using gas as fuel, also close

the shut-off valve and safeguard

against unauthorised re-opening.

Installation of additional components

The installation of additional compo-

nents which have not been tested

together with the boiler can adversely

affect the boiler function.

Our warranty does not cover and we

accept no liability for damage caused

by the installation of such components.

Boiler room conditions

Ho not permit air pollution by

halogenated hydrocarbons (e.āg. as

contained in aerosols, paints,

solvents and cleaning agents).

Ho not use rooms with high levels

of dust.

Ho not use rooms with permanently

high levels of humidity.

HThe room should be frost protected

HMax. ambient temperature 35ĂºC.

HEnsure good ventilation and do not

close or obstruct any vents (where

provided).

Notice of completion

The user of any combustion equipment must notify the local chimney sweep

within four weeks of completion (in Germany).

5592Ă363ĂGB

Contents

Index

Introductory information

For your safetyĂ 2

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Notice of completionĂ 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Quic start

Where to find the controlsĂ 4

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Your heating system is pre-set at the factoryĂ 5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Summary of controls and indicatorsĂ 6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Heating circuit selection ć before adjustments and scanningĂ 9. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Selecting the heating program (summer, winter)Ă 10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Changing the room temperature (day and night temperature)Ă 11. . . . . . . . . . . . . . . . . . . . . . . . . .

Scanning temperatures and operating conditionsĂ 12. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Utilising the Comfort function

Setting up the party modeĂ 13

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Activating economy modeĂ 14. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Start-up/shutdown

Starting the heating systemĂ 15

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Shutting down the heating systemĂ 16. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Modifying and scanning time programs

General notesĂ 17

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Central heatingĂ 18. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HW heating and HW circulation pump 20. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Settings

Changing the HW temperatureĂ 23

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Adjusting the economy mode for holiday periods 24. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Changing date and timeĂ 26. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Selecting the required languageĂ 27. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Modifying the boiler heating characteristicsĂ 28. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

What to do if ...

Special displaysĂ 31

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

iagnosis and troubleshootingĂ 32. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

RepairsĂ37. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Energy saving tipsĂ39. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Key word indexĂ 40. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5592Ă363ĂGB

Quick start

Where to find the controls

You can change all settings for your heating system centrally at the control

unit and its integral programming unit.

You may also make such changes on the remote control unit, if your system

is equipped accordingly.

Remote control operating instructions

Please observe particularly the chapter "Special displays" in these

instructions.

The control unit is located in a

"drawer".

To open, pull the programming unit

forward, flip it up and lock it in a

position where you can clearly read

the details in the display window.

AProgramming unit

BProgramming unit flap

CHinged cover

5592Ă363ĂGB

B C

Quick start

Your heating system is pre-set at the factory

The control unit is preset at the factory for standard operation. Your heating

system is now ready to operate.

You may change the factory settings in accordance with personal

requirements.

Day of the wee and time (CET)

These were set up in the factory. The

system automatically changes over

between summer and winter.

Heating program

This is set to "Heating and HW",

i.e. central heating and HW are

operated (if a HW cylinder is

installed) in accordance with the

programmed times.

Time programs

Between the hours of 6.00 and

22.00Ăhrs, the central heating

operates with standard room

temperatures, and between 5.30 and

22.00 hrs HW is produced (if a HW

cylinder is installed).

Between 22.00 and 6.00Ăhrs, central

heating operates with a reduced

room temperature (set to frost

protection, 3 ºC).

5592Ă363ĂGB

Boiler temperature

Quick start

Summary of controls and indicators

Controls with open flap

Mains switch (page 15)

Fuses

Unblocking excess temperature

Control thermostat

Flap (page 4)

Test switch (only for service purposes)

Emissions test switch (page 33)

ON/OFF lamp (green) (page 15, 16)

Fault indicator (red) (page 32)

5592Ă363ĂGB

Boiler temperature

Quick start

Summary of controls and indicators (cont.)

Economy mode (page14)

Heating programs (pageĂ10)

Standard room temperature (page 11)

Party mode (page 13)

Basic setting (page 8)

Help (page 12, 27)

Confirmation/acknowledgement

Symbols (page 8)

isplay window

Programming unit flap

(page 4)

Adjusting values

Holiday program (page 24)

HW temperature (page 23)

ate/time (page 5, 26)

Heating curve level (page 28)

Heating curve slope

(page 28)

Reduced room temperature

(page 11)

Time program (pageĂ17)

Heating circuit selection

(page 9), for Vitotronic 200

only ! and ?

5592Ă363ĂGB

Quick start

Summary of controls and indicators (cont.)

Display window symbols

(these symbols are not always

displayed, but appear subject to the

system version and operating

conditions)

eIf frost is likely

sfor central heating with

standard room temperature

mfor central heating with

reduced room temperature

wHW heating,

cylinder loading pump running

pHeating circuit pump running

VMixer "Open"

vMixer "Closed"

ABurner ON

QRadio clock reception

Display window contrast settings

Open the programming unit flap and

press d, simultaneously set the

contrast using a or b.

Basic setting e

All modified values are returned to

their factory settings.

Flashing values

etails which flash in the display

indicate that modifications may be

made.

5592Ă363ĂGB

Quick start

Heating circuit selection ć before adjustments and scanning

For heating systems with only one heating circuit, the heating circuit selection

key ! and one heating program key are illuminated and you may begin all

settings steps.

For heating systems with two or three heating circuits, select the respective

heating circuit before making any adjustments or before scanning the heating

circuit concerned.

Heating circuit selection key !: heating circuit 1 without mixer

Heating circuit selection key ?: heating circuit 2 with mixer

Heating circuit selection key §: heating circuit 3 with mixer (only

Vitotronic 300)

Your heating contractor will label each heating circuit individually.

! or ? or §; the following keys

will then illuminate:

HHeating circuit selection key

Hcurrent heating program

(see page 10).

HParty or economy mode, if set up

(see page 13 and 14).

If you have not selected the required

heating circuit before changing

settings, the display window will

show "First press key 1 or 2" or

"First press key 1, 2 or 3".

You can now begin setting up the

selected heating circuit.

Please note:

The key illumination will extinguish

after a short time if you make no

further changes.

5592Ă363ĂGB

Boiler temperature

Quick start

Selecting the heating program (summer, winter)

1. !, ? or §; the respective key

will then illuminate.

2. Select the heating program with

keys G, L or K.

Heating and DHW

Example: winter and transitional periods

HCentral heating with alternate standard and reduced room

temperature (frost protection) acc. to programmed times

HHW heating (if a HW cylinder is installed) and HW

circulation pump (if installed) ON acc. to set times

HFrost protection for boiler and HW cylinder

Please note:

If this key is illuminated,

Hsymbol "s" appears, if central heating with standard room

temperature is active,

Hsymbol "m" appears, if central heating operates with a

reduced room temperature higher than ĂºC,

(see pageĂ11).

Only DHW

Example: Summer

HNo central heating

HHW heating (if a HW cylinder is installed) and HW

circulation pump (if installed) ON acc. to set times

HFrost protection for boiler and HW cylinder

Standby mode

HNo central heating

HNo HW heating

HFrost protection for boiler and HW cylinder

Please note:

The circulation pumps are briefly started every 24Ăhours to

prevent them from seizing up.

5592Ă363ĂGB

Autres manuels pour Vitotronic 200 KW2

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Viessmann Système de chauffage

Viessmann

Viessmann Vitotronic 200 KW2 Manuel utilisateur

Viessmann

Viessmann Vitotronic 200 Series Mode d'emploi

Viessmann

Viessmann Vitocell 100-L Mode d'emploi

Viessmann

Viessmann Vitocell 100-E Mode d'emploi

Viessmann

Viessmann Vitodens 100-W Manuel utilisateur

Viessmann

Viessmann VITOCELL 300B Mode d'emploi

Viessmann

Viessmann Vitovalor PA2 Mode d'emploi

Viessmann

Viessmann VITOVENT 300 Manuel utilisateur

Viessmann

Viessmann VITODENS Manuel utilisateur

Viessmann

Viessmann Vitodens 100-W Manuel utilisateur

Viessmann

Viessmann VITOCELL 100-W Mode d'emploi

Viessmann

Viessmann Vitocell 100-H Mode d'emploi

Viessmann

Viessmann VITOVENT 300 Mode d'emploi

Viessmann

Viessmann VITOBLOC 200 Manuel de la liste des pièces

Viessmann

Viessmann Vitocrossal 300 CT3 SERIES Manuel utilisateur

Viessmann

Viessmann Vitodens 100-W Manuel utilisateur

Viessmann

Viessmann Divicon Manuel utilisateur

Viessmann

Viessmann VITOTRONIC 200 Manuel utilisateur

Viessmann

Viessmann VITOTRONIC 100 Manuel utilisateur

Viessmann

Viessmann VITOSOL 200-T SD2A 2m2 Series Manuel utilisateur

Viessmann

Viessmann VITOVENT 300 Manuel utilisateur

Viessmann

Viessmann AC-Box Mode d'emploi

Viessmann

Viessmann VITOTRONIC 100 Manuel utilisateur

Viessmann

Viessmann VITODENS Manuel utilisateur

Manuels Système de chauffage populaires d'autres marques

aerauliqa

aerauliqa QR350ABP Manuel utilisateur

WatchGas

WatchGas ATEX BEACON Manuel utilisateur

Lampoassa

Lampoassa 203GT Manuel utilisateur

MSA

MSA SOA-1022 Manuel utilisateur

nilan

nilan Compact P Manuel utilisateur

ITR

ITR OASIS NE-S Manuel utilisateur

Carrier

Carrier 48LJD Dimensions et guide d'installation

aldes

aldes EVEREST XV Manuel utilisateur

Kober

Kober C22SPV23MEF Manuel utilisateur

Oxygen

Oxygen X-Air V400 Manuel utilisateur

Carrier

Carrier FB4CNF Manuel utilisateur

Kroll

Kroll HM200 Manuel

Kroll

Kroll HM200 Manuel

NuAire

NuAire XBOXER XBC Series Manuel utilisateur

Trane

Trane VR104GD-U Series Manuel utilisateur

Vents

Vents VUT V mini Manuel utilisateur

Magnum Heating

Magnum Heating W-CONTROL Manuel utilisateur

Solar 3C

Solar 3C 3C382B Guide de dépannage