Viessmann VITOVENT 300 Manuel utilisateur
Operating instructions
for the system user
VIESMANN
Domestic ventilation system with heat recovery
For max. air flow rate 180 m3/h, 300 m3/h, 400 m3/h
VITOVENT 300
5592 578 GB 4/2010 Please keep safe.
2
Please follow these safety instructions closely to prevent accidents and mate-
rial losses.
Safety instructions explained
Danger
This symbol warns against the
risk of injury.
!Please note
This symbol warns against the
risk of material losses and envi-
ronmental pollution.
Note
Details identified by the word "Note" con-
tain additional information.
Target group
These operating instructions are
designed for system users.
This appliance is not designed to be
used by persons (including children) with
limited physical, sensory or mental
capacities, or lacking experience and/or
knowledge, unless they are supervised
by a person responsible for their safety,
or have received instructions from such
a person as to how to use the appli-
ance.
!Please note
Children should be supervised.
Ensure that children never play
with the appliance.
Danger
Incorrect work on the system can
lead to life-threatening acci-
dents.
Work on electrical equipment
must only be carried out by a
qualified electrician.
In case of fire
Danger
With fire there is a risk of burn-
ing.
■ Shut down the system.
■ Use a tested fire extinguisher,
class ABC.
Installation room conditions
!Please note
Incorrect ambient conditions can
lead to system damage and can
put the safe operation at risk.
■ Ensure ambient temperatures
above 0 ºC and below 35 ºC.
■ Prevent air contamination by
halogenated hydrocarbons
(e.g. as contained in paints,
solvents or cleaning fluids) and
excessive dust (e.g. through
grinding/polishing work).
Safety instructions
For your safety
5592 578 GB
3
Auxiliary components, spare and
wearing parts
!Please note
Components that are not tested
with the system may cause sys-
tem damage, or may affect its
functions.
Installation or replacement work
must only be carried out by quali-
fied personnel.
Safety instructions
For your safety (cont.)
5592 578 GB
4
Introductory information
Device description................................................................................................ 6
■Domestic ventilation system............................................................................. 6
■Heat recovery.................................................................................................... 6
■ Bypass.............................................................................................................. 6
■Ice guard circuit................................................................................................. 6
■ Remote control.................................................................................................. 7
Commissioning..................................................................................................... 7
Your system is preset at the factory..................................................................... 8
Where to find the controls
Summary of controls and indicators..................................................................... 9
■Opening the remote control unit........................................................................ 9
■ Functions.......................................................................................................... 9
■Symbols on the display..................................................................................... 10
Selecting ventilation operating mode
Switching the system off....................................................................................... 11
■9 "Standby mode"............................................................................................ 11
Selecting the operating mode............................................................................... 11
Selecting the operating program.......................................................................... 12
Settings
Changing the operating settings........................................................................... 14
Setting an individual time program (P2)............................................................... 14
■ Setting switching points for ventilation times.................................................... 14
■ Example............................................................................................................ 15
■ Deleting switching points.................................................................................. 17
Reducing the ventilation stage for several days................................................... 18
■ Setting a holiday program (start and end times)............................................... 18
Changing the ventilation stage for a few hours only............................................ 19
■ Automatic reset of the temporarily modified ventilation stage........................... 19
Changing the bypass function.............................................................................. 20
Further adjustments
Time and date...................................................................................................... 21
Display version..................................................................................................... 21
Language............................................................................................................. 22
Standard settings / Reset..................................................................................... 23
■ Standard settings (remote control).................................................................... 23
■ Reset................................................................................................................. 23
Index
Index
5592 578 GB
5
Scanning options
Scanning temperatures and further settings........................................................ 24
Scanning time programs...................................................................................... 25
■ Scanning current times for program "P1".......................................................... 25
■ Scanning switching times for program "P2"...................................................... 25
Scanning holiday program.................................................................................... 26
What to do if...
"FIL" appears on the display................................................................................ 27
"FAULT F2/F5/F9/F10" is shown alternately on the display with "CALL SERVICE" 27
Maintenance
Cleaning............................................................................................................... 28
Cleaning the ventilation/extract air valves............................................................ 28
Replacing filter mats and extract air filter............................................................. 30
■ Replacing extract air filter................................................................................. 30
■ Message in the remote control.......................................................................... 30
■ Cleaning or replacing filter mats....................................................................... 31
Keyword index.................................................................................................... 34
Index
Index (cont.)
5592 578 GB
6
Domestic ventilation system
The domestic ventilation system compri-
ses the central ventilation unit Vitovent
300, a duct system with silencers for out-
side air/ventilation air and extract air/
expelled air, as well as air outlets for
ventilation and extract air.
Fresh air enters the living rooms and
bedrooms via ventilation air apertures.
Stale air from rooms where moisture and
odours are created (e.g. kitchen, bath-
room, WC) is routed away via the extract
air apertures.
Heat recovery
The extract air is routed through a coun-
tercurrent heat exchanger for the pur-
pose of heat recovery. This pre-heats the
fresh outside air without coming into
direct contact with the stale extract air.
To ensure heat recovery is as effective
as possible, keep windows and doors
closed while heating. This also applies to
doors to ancillary and cellar rooms that
are not included in the domestic ventila-
tion scheme.
Bypass
Appliances with a maximum air flow rate
of 300 m3/h and 400 m3/h have an inte-
gral temperature-controlled, motorised
bypass damper.
Subject to the outside temperature, this
bypass switches automatically between
operation with and without heat recov-
ery.
In operation without heat recovery, all
the outside air is routed past the heat
exchanger, so that in summer the cool
outside air is not heated by the extract
air.
However, a bypass cannot achieve the
same efficiency as active cooling.
Ice guard circuit
With heat recovery, the extract air is
cooled in the countercurrent heat
exchanger, which creates condensate.
The ice guard circuit prevents the extract
air side of the countercurrent heat
exchanger from icing up as a result of
this condensate.
With this ice guard circuit, the outside
and extract air flow rates are regulated
subject to the outside air temperature
and the pressure at the heat exchanger.
Initially, the outside air flow rate is
reduced to defrost the heat exchanger.
Introductory information
Device description
5592 578 GB
7
Subject to the thickness of the ice, the
outside flow rate can be stopped com-
pletely. At regularly decreasing intervals,
the appliance control unit checks
whether the ventilation air fan can be
switched back on again.
To prevent the ice guard circuit respond-
ing, link an electric pre-heater bank
(accessory) or a geothermal heat
exchanger (on-site) into the domestic
ventilation system.
For a passive house, we generally rec-
ommend using a geothermal heat
exchanger.
Remote control
You can make all required settings at the
remote control.
The following operating programs are
available:
■ Constant reduced ventilation:
m
■ Constant standard ventilation:
s
■ Constant raised ventilation:
g
■ Operation according to time program:
"P1": Preset unchangeable time pro-
gram
"P2": Individually adjustable time pro-
gram
Display
The display either shows the current time
or the room temperature, the operating
program and messages (e.g. to change
the filter).
Commissioning
Commissioning and adjusting the
domestic ventilation system to suit local
conditions and the physical characteris-
tics of the building, plus instructions on
how to operate the system, must be car-
ried out by your heating contractor.
Introductory information
Device description (cont.)
5592 578 GB
8
The remote control is factory-set to oper-
ating program "P1". Your domestic ven-
tilation system is therefore ready for
use:
Monday to Friday
■ 6:00 to 22:00 h:
Standard ventilation
Display: "P1 NORMAL"
■ 22.00 to 6.00 h:
Reduced ventilation
Display: "P1 REDUCED"
Saturday and Sunday
■ 7:00 to 23:00 h:
Standard ventilation
Display: "P1 NORMAL"
■ 23.00 to 7.00 h:
Reduced ventilation
Display: "P1 REDUCED"
Introductory information
Your system is preset at the factory
5592 578 GB
9
Opening the remote control unit
P1
P2 P3
MENU
1234567
PERM KOMFORT
RES
Functions
P1 P2
MENU
RES
NORMAL
1 2 3 4 5 6 7
A B C D
EFGHKL
AFlap open
BWeekdays (1 ≙ Monday etc.)
CChanging the settings
DRotary program selector
(page 11)
EConfirmation
FTerminating entries
GInformation (page 24)
HReset (only for language, time and
date) (see page 23)
KFan operating display
LPossible displays (page 21)
Where to find the controls
Summary of controls and indicators
5592 578 GB
10
Symbols on the display
These symbols are not always dis-
played, but appear subject to the oper-
ating condition.
Flashing displays indicate that modifica-
tions can be made.
PROG
P2 STANDARD
0 3 6 9 12 15 18 21 24
C
D
A
B
F E
1234567
AWeekdays (1 ≙ Monday etc.)
BMenu line:
UBypass function
uTime and date
PROG Individual time program P2
jHoliday program
ÄService settings
CText line
Display subject to menu level and
display of messages
DFan operating display
EDisplay subject to display version
Version 1: Room temperature
Version 2: Time (delivered condi-
tion)
FVentilation time of the selected time
program, shown as slot graphic
Where to find the controls
Summary of controls and indicators (cont.)
5592 578 GB
Autres manuels pour VITOVENT 300
8
Table des matières
Autres manuels Viessmann Système de chauffage
Viessmann
Viessmann VITOBLOC 200 Manuel de la liste des pièces
Viessmann
Viessmann Vitocell 100-H Mode d'emploi
Viessmann
Viessmann Vitotronic 100 HC1 Mode d’emploi
Viessmann
Viessmann VITODENS Manuel utilisateur
Viessmann
Viessmann VITODENS 200 WB2B Manuel utilisateur
Viessmann
Viessmann VITOCELL 100-W Mode d'emploi
Viessmann
Viessmann Vitocell 100-L Mode d'emploi
Viessmann
Viessmann VITODENS Manuel utilisateur
Viessmann
Viessmann VITOTRONIC 300 Manuel utilisateur
Viessmann
Viessmann Vitocell 100-E Mode d'emploi
Viessmann
Viessmann Vitocrossal 300 CT3 SERIES Manuel utilisateur
Viessmann
Viessmann Vitodens 100-W Manuel utilisateur
Viessmann
Viessmann VITOTRONIC 200 Manuel utilisateur
Viessmann
Viessmann VITODENS Manuel utilisateur
Viessmann
Viessmann VITOTRONIC 100 Manuel utilisateur
Viessmann
Viessmann VITOSOL300 Manuel utilisateur
Viessmann
Viessmann NC-Box Mode d'emploi
Viessmann
Viessmann VITOBLOC 200 Manuel de la liste des pièces
Viessmann
Viessmann Vitotronic 200 Series Mode d'emploi
Viessmann
Viessmann VITODENS Manuel utilisateur
