TRENDnet TK-205K - PS/2 KVM Switch Manuel utilisateur
TK-205K
Quick Installation Guide
Table of Contents
Table of Contents
Version 02.08.2006
English .....................................................................................................
Specifications ............................................................................................
Troubleshooting .........................................................................................
1
1
2
3
5
6
1. Before You Start
2. How to Install .....................................................................................
3. Operation ...........................................................................................
................................................................................
System Requirements
Application
TK-205
Quick Installation Guide
KVM cables (two)
PS/2 Keyboard
PS/2 Mouse
VGACompatible Monitor
Windows XP/2000/ME/98SE, Unix or Linux
Package Content
1. Before You Start
English
1
PC 1 PC 2
LCD Monitor
2-Port PS/2
KVM Switch
(TK-205K)
PS/2 Keyboard PS/2 Mouse
Cable Cable
2. How to Install
English
2
Note: TheTK-205 PS/2 KVM Switch does not require any drivers or software.
1. Turn OFF all computers and their
peripherals, and then disconnect all
power cords.
3. Use the KVM cables to connect
each computer to the KVM switch.
Your installation is now complete.
4. Turn ON the connected computers
one-by-one and wait until each
computer's desktop appears.
2. Connect the shared keyboard,
monitor, and mouse to the KVM
switch's Console Port.
English
3
3. Operation
Note:
3.1 The Push Buttons
To switch between computers, you can use the front-panel push buttons
or the "Hot-Key" commands.
Press the corresponding push
buttons to select your PC.
3.2 Hot-Key Commands
Akeyboard hot-key command consists of three keystrokes:
Hot-Key command = ScrLk + ScrLk + Command key(s)
After pressing the ScrLk key, you have 2 seconds to press the ScrLk key again.
You then have another 2 seconds to press a command key. If you do not press
a key within 2 seconds, the switch will exit hot-key mode.
Command Hot-Keys Description
Quick Reference Sheet for TK-205
Select PC
Next higher PC channel
Next lower PC channel
Autoscan
Stop Autoscan
ScrLk ScrLk X
+ +
(x is a top-row number key)
x = 1 ~ 2 for PC channel number
ScrLk ScrLk
+ + (Arrow up)
ScrLk ScrLk
+ + (Arrow down)
ScrLk ScrLk
+ + S
Press any key on keyboard
Select the active PC channel.
Select the next higher connected
PC channel.
Select the next lower connected
PC channel.
Autoscan through every channel for quick
screen browsing of each channel.
Terminate Autoscan activity.
ScrLk ScrLk
+ + (key)
Hot-Key Convention: The hotkey notation ,
denotes that you should hit the individual key consecutively one at a time, not
simultaneously.
Computer Connections 2
Cable Interface (all male)
KVM Cable 2 Sets of 1.2M (4ft) KVM Cables
Console Connectors
(all female)
Mouse: PS/2 6-pin Mini Din
Keyboard: PS/2 6-pin Mini Din
Monitor: VGA/SVGAHDB 15-pin
To Console:
1 x VGA/SVGAHDB 15-pin
To PC:
1 x PS/2 Mouse 6-pin Mini Din
1 x PS/2 Keyboard 6-pin Mini Din
1 x VGA/SVGAHDB 15-pin
Port Selection Push Button or Hot-Key Commands
Auto-Scan Interval 10 seconds
Keyboard State Saved and restored
Power Supply Bus-Powered
Dimensions 95 x 65 x 30 mm (3.7 x 2.6 x 1.2 in.)
Weight 85g (3oz)
0º ~ 40ºC (32º ~104º F)Operating Temperature
-20º ~ 60ºC (-4º ~ 140º F)Storage Temperature
0%~80%, Non-Condensing
Humidity
CE, FCCCertifications
4
Specifications
Certifications
This equipment has been tested and found to comply with FCC and CE Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received. Including interference that may cause
undesired operation.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FORANY RADIO ORTV INTERFERENCE
CAUSED BY UNAUTHORIZED MODIFICATIONS TOTHIS EQUIPMENT. SUCH MODIFICATIONS
COULD VOID THE USER’SAUTHORITY TO OPERATETHE EQUIPMENT.
5
Troubleshooting
Waste electrical and electronic products must not
be disposed of with household waste. Please
recyclewherefacilitiesexist. CheckwithyouLocal
AuthorityorRetailerforrecyclingadvice.
Q1:
A1:
Q2:
A2:
Q3:
A3:
Q4:
A4:
Q5:
A5:
Where is the AC adapter? I did not find one in the box.
I have the KVM switch connected properly, but my keyboard and mouse don't
work. Please make sure your PS/2 ports are working properly by testing it with
another mouse or keyboard. Once you confirm that the PS/2 ports are functional,
please reboot your computers, and try to use the KVM switch again.
Can I connect or disconnect the KVM cables while the computers are turned
on? Yes, you can connect or disconnect the KVM cables while the computers are
turned on, because the interface is Hot-Pluggable.
Will the KVM switch remember the keyboard settings between computers?
Yes, the KVM switch will remember the keyboard settings when switching
between your computers. (i.e.: Caps lock, Num key, etc.)
How do I switch from one computer to another with the KVM switch?
Because the TK-205 KVM switch supports Hot-Key commands, you can use
Hot-Key commands to switch between 2 computers.
The TK-205 does not require anAC adapter. It draws power from your
computer's keyboard port.As long as your KVM switch is connected to the
keyboard port, it will receive the necessary power to function.
If you still encounter problems or have any questions regarding the TK-205K, please
contact Trendnet's Technical Support Department.
Limited Warranty
TRENDnet warrants its products against defects in material and
workmanship, under normal use and service, for the following lengths of
time from the date of purchase.
TK-205K - 2 Year Warranty
If a product does not operate as warranted above during the applicable
warranty period, TRENDnet shall, at its option and expense, repair the
defective product or part, deliver to customer an equivalent product or
part to replace the defective item, or refund to customer the purchase
price paid for the defective product. All products that are replaced will
become the property of TRENDnet. Replacement products may be new
or reconditioned.
TRENDnet shall not be responsible for any software, firmware,
information, or memory data of customer contained in, stored on, or
integrated with any products returned to TRENDnet pursuant to any
warranty.
There are no user serviceable parts inside the product. Do not remove
or attempt to service the product by any unauthorized service center.
This warranty is voided if (i) the product has been modified or repaired
by any unauthorized service center, (ii) the product was subject to
accident, abuse, or improper use (iii) the product was subject to
conditions more severe than those specified in the manual.
Warranty service may be obtained by contacting TRENDnet office within
the applicable warranty period for a Return Material Authorization (RMA)
number, accompanied by a copy of the dated proof of the purchase.
Products returned to TRENDnet must be pre-authorized by TRENDnet
with RMA number marked on the outside of the package, and sent
prepaid, insured and packaged appropriately for safe shipment.
6
WARRANTIES EXCLUSIVE: IF THE TRENDnet PRODUCT DOES NOT
OPERATE AS WARRANTED ABOVE, THE CUSTOMER'S SOLE
REMEDY SHALL BE, AT TRENDnet'S OPTION, REPAIR OR
REPLACEMENT. THE FOREGOING WARRANTIES AND REMEDIES
ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES,
EXPRESSED OR IMPLIED, EITHER IN FACT OR BY OPERATION OF
LAW, STATUTORY OR OTHERWISE, INCLUDING WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR APARTICULAR PURPOSE.
TRENDnet NEITHER ASSUMES NOR AUTHORIZES ANY OTHER
PERSON TO ASSUME FOR IT ANY OTHER LIABILITY IN
CONNECTION WITH THE SALE, INSTALLATION MAINTENANCE OR
USE OF TRENDnet'S PRODUCTS.
TRENDnet SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS
TESTING AND EXAMINATION DISCLOSE THAT THE ALLEGED
DEFECT IN THE PRODUCT DOES NOT EXIST OR WAS CAUSED BY
CUSTOMER'S OR ANY THIRD PERSON'S MISUSE, NEGLECT,
IMPROPER INSTALLATION OR TESTING, UNAUTHORIZED
ATTEMPTS TO REPAIR OR MODIFY, OR ANY OTHER CAUSE
BEYOND THE RANGE OF THE INTENDED USE, OR BYACCIDENT,
FIRE, LIGHTNING, OR OTHER HAZARD.
LIMITATION OF LIABILITY: TO THE FULL EXTENT ALLOWED BY LAW
TRENDnet ALSO EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY
LIABILITY, WHETHER BASED IN CONTRACT OR TORT (INCLUDING
NEGLIGENCE), FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT,
SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND, OR FOR LOSS OF
REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF
INFORMATION OR DATE, OR OTHER FINANCIAL LOSS ARISING OUT
OF OR IN CONNECTION WITH THE SALE, INSTALLATION,
MAINTENANCE, USE, PERFORMANCE, FAILURE, OR INTERRUPTION
OF THE POSSIBILITY OF SUCH DAMAGES, AND LIMITS ITS LIABILITY
TO REPAIR, REPLACEMENT, OR REFUND OF THE PURCHASE PRICE
PAID, AT TRENDnet’S OPTION. THIS DISCLAIMER OF LIABILITY FOR
DAMAGES WILL NOT BE AFFECTED IFANY REMEDY PROVIDED
HEREIN SHALL FAIL OF ITS ESSENTIAL PURPOSE.
Governing Law: This Limited Warranty shall be governed by the laws of
the state of California.
AC/DC Power Adapter, Cooling Fan, and Power Supply carry 1 Year
Warranty
7
Copyright ©2006. All Rights Reserved. TRENDnet.
3135 Kashiwa Street
Torrance, CA 90505
USA
TRENDnet Technical Support
Tech Support Hours
24/7 Toll Free Tech Support
Contact
Telephone: 1(866) 845-3673
Email: [email protected]
Contact
Tech Support Hours
Telephone:
Deutsch :+49 (0) 6331 / 268-460
Français :+49 (0) 6331 / 268-461
0800-90-71-61 (numéro vert)
Español :+49 (0) 6331 / 268-462
English :+49 (0) 6331 / 268-463
Italiano :+49 (0) 6331 / 268-464
Dutch :+49 (0) 6331 / 268-465
Fax: +49 (0) 6331 / 268-466
8:00am - 6:00pm
Middle European Time
Monday - Friday
Product Warranty Registration
Please take a moment to register your product online.
Go to TRENDnet’s website at http://www.trendnet.com
US/Canada Support Center European Support Center
Autres manuels pour TK-205K - PS/2 KVM Switch
4
Table des matières
Autres manuels TRENDnet Changer
TRENDnet
TRENDnet TE100-S24V Manuel utilisateur
TRENDnet
TRENDnet TPE-S80 Manuel utilisateur
TRENDnet
TRENDnet TK-204UK - DVI USB KVM Switch Manuel utilisateur
TRENDnet
TRENDnet TE100-DM24 Manuel utilisateur
TRENDnet
TRENDnet TU2-400 Manuel utilisateur
TRENDnet
TRENDnet TL2-F7120 Manuel utilisateur
TRENDnet
TRENDnet TEG-2248WS - Gigabit Web Smart Switch Manuel utilisateur
TRENDnet
TRENDnet TEG-S081Fi Manuel utilisateur
TRENDnet
TRENDnet TPE-224WS - Web Smart PoE Switch Manuel utilisateur
TRENDnet
TRENDnet TU2-NU4 Manuel utilisateur
TRENDnet
TRENDnet TEG-S240TX - DATA SHEETS Manuel utilisateur
TRENDnet
TRENDnet TEG-S8g Manuel utilisateur
TRENDnet
TRENDnet TU2-400 Manuel utilisateur
TRENDnet
TRENDnet TK-409K Manuel utilisateur
TRENDnet
TRENDnet TEG-S081Fi Manuel
TRENDnet
TRENDnet TE100-DX16 Manuel utilisateur
TRENDnet
TRENDnet TL2-E284 Manuel utilisateur
TRENDnet
TRENDnet TE100-S16V Manuel utilisateur
TRENDnet
TRENDnet TE100S8P - Fast Ethernet Switch Manuel utilisateur
TRENDnet
TRENDnet TE100-S24R Manuel utilisateur
