TRENDnet TEG-S224 - DATA SHEETS Manuel utilisateur
TEG-S224
Quick Installation Guide
Table of Contents
Table of Contents
Version 09.27.2007
English ......................................................................................................
Technical Specifications .............................................................................
Troubleshooting ..........................................................................................
1
1
2
4
6
1. Before You Start
2. Hardware Installation .........................................................................
.................................................................................
Minimum Requirements
Application
Computer with Network adapter installed
An environment that is fairly cool and dry
Package Content
1. Before You Start
English
1
Quick Installation Guide
Power Cord
TEG-S224
2 mounting brackets and screws
4 Rubber Feet
Leave at least 10 cm of space at the front and rear of the Switch for
ventilation
EIA Standard, 19-inch rack or sturdy, level surface that can support the
weight of the Switch
An environment that is free from strong electromagnetic field generators
(such as motors), vibration, dust and direct exposure to sunlight
Workstation with Copper Gigabit PCI Adapter
(TEG-PCITXR)
Workstations with Copper Gigabit PCI Adapter
(TEG-PCITXR)
5-Port 10/100/1000Mbps
Copper Gigabit Switch
(TEG-S50TXE)
Cable/DSL
Modem Router
26-Port 10/100/1000Mbps Copper Gigabit Switch
(TEG-S224)
Workstations with 10/100Mbps Ethernet Card
(TE100-PCIWN)
1000Mbps
Internet
10/100Mbps
2. Hardware Installation
English
2
1. Connect the Power Cord to
the TEG-S224 and then to a power
outlet.
2. Connect a CAT-5e or CAT-6 RJ-45
network cable from the computer to
an available Ethernet port on the
TEG-S224.
4. Carefully position the switch onto
the rack. Align the bracket to the
screw holes on the rack, then use
the screws provided with the
equipment rack to mount the
switch.
English
3
The Switch can be mounted in an EIA standard-size, 19-inch rack, which can
be placed in a wiring closet with other equipment.
3. Attach the mounting brackets to
both sides of the switch and secure
them with the provided screws.
Register Your Product
To ensure the highest level of customer service and support, please take a moment to
register your product Online at: www.trendnet.com/register
Thank you for choosing TRENDnet
4
Standards
IEEE 802.3 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3ab 1000BASE-T
IEEE 802.3x Full-Duplex Flow Control
Protocol CSMA/CD
Data Transfer Rates
Ethernet:
10Mbps (Half-Duplex), 20Mbps (Full-Duplex)
Fast Ethernet:
100Mbps (Half-Duplex), 200Mbps (Full-Duplex)
Gigabit Ethernet:
2000Mbps (full-duplex)
Network Cables
Ethernet: UTP/STP CAT-3, 4, 5
Fast Ethernet: UTP/STP CAT-5, 5e , 6
Gigabit : UTP/STP CAT-5e, CAT-6 (Recommended)
Number of Ports 24 x 10/100Mbps Auto-Negotiation, Auto-MDIX
2 x 10/100/1000Mbps Auto-Negotiation, Auto-MDIX
General
Topology Star
Technical Specifications
Transmission Method Store-and-Forward
Packet Filtering/
Forwarding Rate
10Mbps Ethernet: 14,880pps (packet per second)
100Mbps Fast Ethernet: 148,800pps
1000Mbps Gigabit Ethernet: 1,488,000pps
MAC Address Learning
RAM Buffer
Filtering Address Table
Self-learning, auto-aging
2.5MB per device
8K entries per device
Performance
5
AC inputs 100-240V AC Universal, 50/60 Hz
Power Consumption 11.75 Watts
Temperature Operating: 0 ~ 40 C, Storage: -10 ~ 70 C° ° ° °
Dimensions (L x W x H) 440 x 140 x 44 mm
Weight 4.7lbs
Physical and Environmental
Humidity
Certification
Operating: 10% ~ 90% (non-condescending)
FCC Class A, CE Mark Class A, VCCI Class A
6
Troubleshooting
Q1:
A1:
Q2:
A2:
Q3:
A3:
Q4:
A4:
After connecting the Switch to a power outlet, the LEDs do not turn on.
Check the connection of the power adapter to the TEG-S224 and the power
outlet. Also check that the power outlet is receiving power.
When I connect a computer to the Switch port, the LINK/ACT LED turns on,
but the 1000Mbps LED remains off.
First, check the Ethernet Cable. Make sure you are using CAT-5e or CAT-6
Ethernet Cables. Some CAT-5 cables are not rated to run in Gigabit. Second,
make sure that you have a Gigabit Ethernet Adapter installed on your computer.
After I connect my PCs to the Switch, I am unable to share files.
First, check the LEDs on the Switch. Make sure the LINK/ACT LED is on.
Second, check the network cable. The minimum length of the cable is 1.5 meters
and the maximum length of the cable is 100 meters. Third, disable any software f
firewall program. Fourth, verify that you have file sharing enabled. Please contact
your operating system provider for more information.
After I connect my PCs to the Switch, I can only get onto the Internet from one
computer.
The Switch was not designed to share Internet between multiple computers.
You need to install an Internet router such as the TRENDnet TW100-S4W1CA.
IIf you still encounter problems or have any questions regarding the TEG-S224 please
contact TRENDnet's Technical Support Department.
Limited Warranty
- 5-Year Warranty
TRENDnet warrants its products against defects in material and workmanship, under
normal use and service, for the following lengths of time from the date of purchase.
TEG-S224
If a product does not operate as warranted above during the applicable warranty period,
TRENDnet shall, at its option and expense, repair the defective product or deliver to
customer an equivalent product to replace the defective item. All products that are
replaced will become the property of TRENDnet. Replacement products may be new or
reconditioned.
TRENDnet shall not be responsible for any software, firmware, information, or memory
data of customer contained in, stored on, or integrated with any products returned to
TRENDnet pursuant to any warranty.
There are no user serviceable parts inside the product. Do not remove or attempt to
service the product through any unauthorized service center. This warranty is voided if
(i) the product has been modified or repaired by any unauthorized service center, (ii) the
product was subject to accident, abuse, or improper use (iii) the product was subject to
conditions more severe than those specified in the manual.
Warranty service may be obtained by contacting TRENDnet office within the applicable
warranty period for a Return Material Authorization (RMA) number, accompanied by a
copy of the dated proof of the purchase. Products returned to TRENDnet must be pre-
authorized by TRENDnet with RMA number marked on the outside of the package, and
sent prepaid, insured and packaged appropriately for safe shipment.
7
WARRANTIES EXCLUSIVE: IF THE TRENDNET PRODUCT DOES NOT OPERATE
AS WARRANTED ABOVE, THE CUSTOMER’S SOLE REMEDY SHALL BE, AT
TRENDNET’S OPTION, REPAIR OR REPLACEMENT. THE FOREGOING
WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER
WARRANTIES, EXPRESSED OR IMPLIED, EITHER IN FACT OR BY OPERATION OF
LAW, STATUTORY OR OTHERWISE, INCLUDING WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. TRENDNET
NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT
ANY OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION,
MAINTENANCE OR USE OF TRENDNET’S PRODUCTS.
TRENDNET SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND
EXAMINATION DISCLOSE THAT THE ALLEGED DEFECT IN THE PRODUCT DOES
NOT EXIST OR WAS CAUSED BY CUSTOMER’S OR ANY THIRD PERSON’S
MISUSE, NEGLECT, IMPROPER INSTALLATION OR TESTING, UNAUTHORIZED
ATTEMPTS TO REPAIR OR MODIFY, OR ANY OTHER CAUSE BEYOND THE
RANGE OF THE INTENDED USE, OR BY ACCIDENT, FIRE, LIGHTNING, OR OTHER
HAZARD.
LIMITATION OF LIABILITY: TO THE FULL EXTENT ALLOWED BY LAW TRENDNET
ALSO EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY LIABILITY, WHETHER
BASED IN CONTRACT OR TORT (INCLUDING NEGLIGENCE), FOR INCIDENTAL,
CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND,
OR FOR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF
INFORMATION OR DATE, OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN
CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE, USE,
PERFORMANCE, FAILURE, OR INTERRUPTION OF THE POSSIBILITY OF SUCH
DAMAGES, AND LIMITS ITS LIABILITY TO REPAIR, REPLACEMENT, OR REFUND
OF THE PURCHASE PRICE PAID, AT TRENDNET’S OPTION. THIS DISCLAIMER OF
LIABILITY FOR DAMAGES WILL NOT BE AFFECTED IF ANY REMEDY PROVIDED
HEREIN SHALL FAIL OF ITS ESSENTIAL PURPOSE.
Governing Law: This Limited Warranty shall be governed by the laws of the state of
California.
Note: AC/DC Power Adapter, Cooling Fan, Cables and Power Supply carry 1-Year
Warranty
8
Autres manuels pour TEG-S224 - DATA SHEETS
3
Table des matières
Autres manuels TRENDnet Changer
TRENDnet
TRENDnet TE100-S16D Manuel utilisateur
TRENDnet
TRENDnet TK-205i Manuel utilisateur
TRENDnet
TRENDnet TE100-S28plus Manuel utilisateur
TRENDnet
TRENDnet TEG-S081FMi Manuel utilisateur
TRENDnet
TRENDnet TPE-T88G Manuel utilisateur
TRENDnet
TRENDnet TK-200 Manuel utilisateur
TRENDnet
TRENDnet TK-1603R Manuel utilisateur
TRENDnet
TRENDnet TK-209K Manuel utilisateur
TRENDnet
TRENDnet TL2-E284 Manuel utilisateur
TRENDnet
TRENDnet TE100-S1616V Manuel utilisateur
TRENDnet
TRENDnet TK-207K - KVM Switch - USB Guide de démarrage rapide
TRENDnet
TRENDnet TPE-TG50g Manuel utilisateur
TRENDnet
TRENDnet TEG-S50TXE SHEETS Manuel utilisateur
TRENDnet
TRENDnet TPE-TG50ES Manuel utilisateur
TRENDnet
TRENDnet TE100-DX8 - Manuel utilisateur
TRENDnet
TRENDnet TE100-S86FX Manuel utilisateur
TRENDnet
TRENDnet TE100-S16R Manuel utilisateur
TRENDnet
TRENDnet TEG-S081Fi Manuel
TRENDnet
TRENDnet TE100-DM24 Manuel utilisateur
TRENDnet
TRENDnet TEG-S80TXD Manuel utilisateur
