TRENDnet TEG-S4000i Manuel utilisateur
TEG-S4000i
4-Slot SNMP Modular Switch
Ethernet / Fast Ethernet / Gigabit Ethernet
User’s Guide
Version 2.0 23-April-2003
1
Release Note
4 slot modular switch manual
Update Version Progress status Remark QA PM
23/04/2003 V2.0 On checking 1. 10/100 TX (48350) spec. MAC: 4K
Buffer:256Kbytes
2. 2/4/8 100FX (48310 ) spec.
MAC12k, Buffer:5Mbytes
3. Gigabit module (48360) MAC:4K,
Buffer 128 Kbytes
Richard
2
Table of Content
Introduction
Product Overview
Network Configuration
Connecting to the Network
Web-Based Management
SNMP Management
Product Specifications
Appendix A.
Internet Explorer Setting
Appendix B.
VLAN Setting
3
1.
Introduction
Welcome to the World of Switching-Network. In modern business
society, communication and information sharing are fundamental to
our lifestyle. Computer networks are one of the fastest means of
communication.
Congratulations on purchasing the Modular Switch. This Modular
Switch is a combination of 4-slot host cabinet and optional 4 kinds of
media modules. A maximum 32 x 10/100Base-TX switched ports
can be achieved using 4 x 8 port 10/100 Base-TX switch modules.
Modular Switch features store-and-forward switching scheme. Every
module has it’s own entry MAC address table to store source
address. The backplane of the Modular Switch can reach up to 10.4
Gbps as to improving network performance.
Figure 1-1 The Modular Switch
Modular Switch with layer 2 management functions, 4 expansion
slots can flexible configure your network. The 4 optional modules
can be 8-Port 10/100 Auto-sensing Intelligent Switch Module,
2/4/8-Port 100 Base-FX Intelligent Fiber Module, Gigabit
1000Base-T Intelligent Switch Modules, and Gigabit
4
1000Base-SX/LX Intelligent Fiber Modules.
With its build-in Web-based Management, managing and configuring
the Modular Switch becomes easier. From cabinet management to
port-level control and monitoring, you can visually configure and
manage your network via Web Browser. Just click your mouse
instead of typing cryptic command strings. However, the Modular
Switch can also be managed via Telnet, Console, or third-party
SNMP Management.
KeyFeatures
Conforms to IEEE 802.3, 802.3u, 802.3z, 802.3ab and
802.3x standards
4 expansion slots to configure flexible network
One built-in intelligent module with RS-232 console
port ( front side )
Supports Half-duplex mode for backpressure, and
full-duplex for flow-control
Store-and-Forward switching architecture for abnormal
packet filtering
Up to 9.6Gbps Back-plane forwarding rate
Mac address: 4K for 8 port 10/100 TX and Gigabit
module, 12K for 2/4/8 port fiber module.
Packet Buffer: 128Kbyts for 8 ports 10/100TX module, 4
Mbytes for 100FX Fiber module, 128KBytes for Gigabit
module
LED System Power, Diagnostic
8 ports TX module: 10/100Mbps,Link/Active,
Full-duplex/Collision;
2/4/8 ports Fiber module: Link/Active,
Full-duplex/Collision
Gigabit Module: Link, Active, Full duplex, Collision
Optional different modules including
Gigabit module ( SX/LX ), Gigabit 1000Base-T, 8-port
auto-sensing 10/100Base-TX switch module, 2/4-port
100BaseFX ( ST/SC/MT-RJ/VF-45 ) fiber module, 8-port
100BaseFX ( MT-RJ/VF-45 ) fiber module
5
Intelligent Module Features
Web-Based Management
SNMP Management
Console and Telnet Management
IEEE 802.1Q Tagging VLAN ( Up to 4095 VLANs )
IEEE 802.1d Spanning Tree Protocol ( STP )
Statistic Address Table for manual address-addition
Port Trunking supported
IGMP supported
Broadcast Storm Filter
Port Mirror
Web Browser Security
Firmware upgradeable trough TFTP
MIB II and Private MIB supported
IEEE 802.1p QoS, ToS
Port Security
Management Methods
The Modular Switch supports following management methods :
Console and Telnet Management
Web-based Management
SNMP Network Management
Console and Telnet Management
Console Management is done through the RS-232 Console Port.
Managing the Modular Switch in this method requires a direct
connection between PC and the Switch. While Telnet management
is done over the network. Once the Switch is on the network, you
can use Telnet to Log in and change the configuration.
6
Web-based Management
The Modular Switch provides an embedded HTML web site residing
in flash memory. It offers advanced management features and allow
users to manage the Modular Switch from anywhere on the network
through a standard browser such as Microsoft Internet Explorer. For
more information, See Section 5 Web-Based Management.
SNMP Network Management
SNMP ( Simple Network Management Protocol ) provides a means
to monitor and control network device, and to manage configurations,
statistic collection, performance, and security.
Data is passed from SNMP agents, which are hardware & software
processes reporting activity in each network device to the
workstation console used to oversee the network. The agent return
information contained in a MIB ( Management Information Base ),
which is a data structure that defines what is obtainable from the
device and what can be controlled.
7
Package Contents
Unpack the carton of the Modular Switch and verify them against the
checklist below.
Modular Switch
Power Cordially
Four Rubber Feet
RS-232 cable
User Guide
Modular Switch Rubber Feet
Rack-mounted Kit RS-232 cable User Guide
Power Cord Figure 1-2. Package Contents
Compare the contents of your Modular Switch package with the
standard checklist above. If any item is missing or damaged, please
contact your local dealer for service.
8
2.
Product Overview
This section contains the following topics:
Physical Description
Optional Modules
Installing Optional Modules
Software Concepts
Physical Description
The physical dimensions of the HomePNA 312M are:
440mmx 227mm x 67mm ( Lx Wx H )
The Modular Switch is a modular unit, and its chassis contains four
slots. All optional models come with the built-in CPU modules. The
LEDs are located on the front panel of the Switch to allow you to
monitor the operation and performance at a glance. All ports can be
used for network configuration. The RS-232 port is used for
Out-of-Band Management.
Front & Rear Panel
The front panel of Modular Switch displayed in Figure 1-1 is shown
with 8-port 10/100Base-TX Module, 4-port 100Base-FX Fiber
Module and Gigabit 1000Base-T and Gigabit SX Fiber Module.
Figure 2-1. Front Panel
9
The 3-pronged power plug and On/off switched are located at the
Rear Panel of the Modular Switch displayed in Figure 2-2. The
Switch will work with AC in the range 100-240VAC, 50-60Hz.
F
igure 2-2.
R
ear Pane
LED Indicators
All LED status indicators are located on the FRONT panel of the
switch. They provide a real-time indication of system and operational
status. The ports for connections to other devices and networks are
also on the front panels.
LED Status Meaning
Power Green Power on
Diag Red Alert and problem notice
Green Device has been connected to the port
Blinks The data is transmitting on the port
LK/ACT
Off No device attached
Yellow Port in full duplex mode
Blinks A collision occurs on the port
FD/COL
Off No device attached or in half duplex mode
Green The Port is in 100Mbps mode
100
( Only for 8
port 10/100M
Switch Module )
Off Not connected or in 10 Mbps mode
Table 2-1. The above table provides descriptions of the LED status and
their meaning.
10
Autres manuels pour TEG-S4000i
1
Table des matières
Autres manuels TRENDnet Changer
TRENDnet
TRENDnet TEG-240WS Manuel utilisateur
TRENDnet
TRENDnet TE100-DX4PCI Manuel utilisateur
TRENDnet
TRENDnet TEG-424WS Manuel utilisateur
TRENDnet
TRENDnet TEG-S2600I - 10/100Mbps Switch With Mini-GBIC... Manuel utilisateur
TRENDnet
TRENDnet TEG-240WS Manuel utilisateur
TRENDnet
TRENDnet TEG-S51SFP Manuel utilisateur
TRENDnet
TRENDnet TEG-S50TXE SHEETS Manuel utilisateur
TRENDnet
TRENDnet TPE-S88 - Web Smart PoE Switch Manuel utilisateur
TRENDnet
TRENDnet TU2-NU4 Manuel utilisateur
TRENDnet
TRENDnet TE100-S16 - DATA SHEETS Manuel utilisateur
TRENDnet
TRENDnet TE-500plus Manuel utilisateur
TRENDnet
TRENDnet TK-205i Manuel utilisateur
TRENDnet
TRENDnet TEG-2 248WS Manuel utilisateur
TRENDnet
TRENDnet TE100-S24 - High Performance Auto-Sensing 10/100Mbps Fast Ethernet... Manuel utilisateur
TRENDnet
TRENDnet TEG-S50G Manuel utilisateur
TRENDnet
TRENDnet TE100-H5Eplus Manuel utilisateur
TRENDnet
TRENDnet TK-801R Manuel utilisateur
TRENDnet
TRENDnet TEG-S40TXD Manuel utilisateur
TRENDnet
TRENDnet TE100 S5Pplus Manuel utilisateur
TRENDnet
TRENDnet TK-802R Manuel utilisateur
