TRENDnet NWay Manuel utilisateur

Aug/02 1 MNADM6509001

8-Port 10/100Mbps NWay Switch

User Manual

Ver. 1.00

All brand names and trademarks are properties of their respective owners.

Aug/02 2 MNADM6509001

Introduction

The 8-Port NWay Switch is designed to for the needs of small enterprise and home networks. Its easy

installation can boost network performance just in a couple of minutes. With its Auto-Negotiation capability, all

ports can be configured to its optimum speed of 10/20Mbps or 100/200Mbps automatically. It eliminates

bottlenecks and bandwidth constraints, optimizes network performance. Inevitably the 8-Port NWay Switch is

your best choose to improve network performance with the highest performance/price ratio.

Key Features

y10/100Mbps twisted-pair ports with Auto-negotiation.

yBridging capability for 100Mbps and 10Mbps segments.

yProvides Store-and-Forward Switching Architecture.

ySupports Auto MDI/MDI-X.

ySupports IEEE802.3x Flow-Control Full-Duplex operation.

ySupports Back-Pressure Flow-Control Half-Duplex operation.

y1M bits Packet Buffer.

y1K entries Address Table.

yEight RJ-45 Ports

yOne Uplink Port

Packing List

Thank you for purchasing of this Switch. The package should contain the following items:

yOne 8-Port Switch

yOne AC/DC Power Adapter

yOne User Manual

yFour rubber feet

If anything is missing, please contact your place of purchase.

Cabling

10Mbps

Category 3, 4, or 5 Twisted-Pair cable can be used for transmitting data at 10Mbps or 20Mbps bandwidth on

10BASE-T networks.

100Mbps

Only Category 5 Twisted-Pair cable can be used for transmitting data at 100Mbps or 200Mbps bandwidth on

100BASE-TX networks.

Aug/02 3 MNADM6509001

Networking

Connecting computers to Switch

1. Make sure all computers to be connected to the Switch have installed properly a network interface card.

2. Connect computer to the Switch with a twisted-pair cable. The cable should have RJ-45 plugs. Use

Category 5 cable for all connections. Please pay attention to the length of each cable should be less than

100 meters.

3. Plug one end of the cable to the RJ-45 port of the computer’s NIC. Plug the other end to any available port

on the Switch.

Up linking to other Switch

1. Prepare a straight-through Category 5 twisted-pair cable with RJ-45 plugs. Make sure the cable does not

longer than 100 meters.

2. Connect one end of the cable to the Switch’s Uplink port.

3. Connect the other end of the cable to the other Switch’s MDI-X port (in our Switch, Port 1 to Port 8 are

MDI-X ports).

Alternatively, you can connect two Switches at both ends MDI-X ports with a crossover cable.

Please note that the UPLINK Port shares with Port 8. Only either of them can be used at a time, not both.

Status LEDs

LED Color State Indication

POWER Amber On Power is ON

SPEED Green On

Off

Connection at 100Mbps

Connection at 10Mbps

LINK/ACT Green On

Off

Flash

Valid Network Connection

No Network Connection

Sending/Receiving Data

FDX Green On

Off

Full-Duplex Mode

Half-Duplex Mode

Aug/02 4 MNADM6509001

Specifications

Model 8-Port 10/100Mbps NWay Switch

Access Method CSMA/CD

Standards IEEE802.3u 100BASE-TX

IEEE802.3 10BASE-T

Media Support 10BASE-T 100-Ohm Cat. 3, 4, 5 twisted-pair

100BASE-T 100-Ohm Cat. 5 twisted-pair

Ports 8 RJ-45 + 1 Uplink Port

Bandwidth 100BASE-TX: 200/100Mbps via Auto-Negotiation

10BASE-T: 20/10Mbps via Auto-Negotiation

Switching Method Store-And-Forward

Filtering/Forwarding Rate 100Mbps: 148800 packets/second

10Mbps: 14880 packets/second

Flow Control Full Duplex – IEEE802.3x

Half Duplex – Back Pressure

MAC Entry 1K entries

Packet Buffer 1M bits per system

Power Requirement DC 6V/1A

Operating Temperature 0 to 45 degree C

Storage Temperature -20 to 70 degree C

Humidity 10% to 90% non-condensing

Status LEDs Port: 3 (SPEED, LINK/ACT, FDX)

System: 1 (POWER)

Dimensions 161 x 84 x 26 mm

Certification FCC Class A, CE Mark

Table des matières

Autres manuels TRENDnet Changer

TRENDnet

TRENDnet TE100 S5Pplus Manuel utilisateur

TRENDnet

TRENDnet TK-804R Manuel utilisateur

TRENDnet

TRENDnet TEG-240WS Manuel utilisateur

TRENDnet

TRENDnet TK-1601R Manuel utilisateur

TRENDnet

TRENDnet TK-801R Manuel utilisateur

TRENDnet

TRENDnet TPE-T80 Manuel utilisateur

TRENDnet

TRENDnet TEG-S80TXD Manuel utilisateur

TRENDnet

TRENDnet TPE-T160H Manuel utilisateur

TRENDnet

TRENDnet TK-200K Manuel utilisateur

TRENDnet

TRENDnet TPE-TG44G Manuel utilisateur

TRENDnet

TRENDnet TE100-S24R Manuel utilisateur

TRENDnet

TRENDnet TEG-S18TX Manuel utilisateur

TRENDnet

TRENDnet THA?101 Manuel utilisateur

TRENDnet

TRENDnet TPE-1020WS Manuel utilisateur

TRENDnet

TRENDnet TEG-S5 Manuel utilisateur

TRENDnet

TRENDnet TEG-2224WS Manuel utilisateur

TRENDnet

TRENDnet TL2-E284 Manuel utilisateur

TRENDnet

TRENDnet TU-400E Manuel utilisateur

TRENDnet

TRENDnet TK-209K Manuel utilisateur

TRENDnet

TRENDnet TEG-40128 Manuel utilisateur

TRENDnet

TRENDnet TEG-S50G Manuel utilisateur

TRENDnet

TRENDnet TEG-S4000 Manuel utilisateur

TRENDnet

TRENDnet TK-423K - USB/PS/2 KVM Switch Manuel utilisateur

TRENDnet

TRENDnet TEG-S50TXE SHEETS Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur