TPI SP670 Manuel utilisateur

SP670 Smart Pressure Probe

Instruction Manual

Scan to download

the TPI View app:

Description

The TPI SP670 Smart Pressure Probe is used to measure pressure on refrigeration systems. It

connects to a smart device using the TPI View App. It sends live measurement data and can be used in

conjunction with the SP323 Smart Temperature Clamp Probe to calculate Superheat and Subcooling

using the App. The angled ¼´fitting allows access to service ports in close spaces.

The SP670 Schrader Valve Depressor is adjustable for use with worn valves in test ports. It can be

serviced as well to extend the life of the probe.

OPERATION

1. Install the TPI View App on your smart device.

2. Press and hold the SP670 on/off key for approximately 2 seconds to turn the smart probe on. An

orange LED will blink indicating the SP670 is ready to be paired.

3. Open the View app and tap ‘Start Scanning for TPI Smart Instruments’. Tap on SP670 to

connect it to the app..

4. The live reading will be displayed on the app. Units are selectable by tapping on the box next to

the live reading.

SUPERHEAT & SUB-COOLING

Connecting two SP670’s and two SP323 smart temperature clamps allow superheat and sub-cooling to

be calculated.

1. Turn on each SP670 and SP323, open the app and allow the smart probes to connect.

2. Connect the probes to the Suction (low side) and Liquid (high side) lines.

3. Tap on ‘Refrigeration’ in the app. For the Suction Line tap on ‘Pressure Select’ to assign the

SP670 connected to the suction line from the available devices. Repeat this for the ‘Temp

Select’ to assign the SP323 connected to the suction line. Repeat step 3 for the Liquid Line

connected smart probes.

4. Tap on the refrigerant canister to select from favorites. Tapping on the gear also allows units of

measure to be changed as needed. The Pressure, Temperature and Vapor Saturation, and

Liquid Saturation will be displayed on the app.

IMPORTANT: When connecting the SP670 to a test port do not use the body of the

instrument to tighten the connection. Only turn the knurled knob of the smart probe. Using the

body of the instrument can result in damage to the SP670. Do not overtighten when

connecting to the test port or damage to the SP670 and port may result.

WARNING: The SP670 reads up to 870 PSI and is overpressure protected to 1000 PSI.

Never apply more than 1000PSI as damage to the sensor may result.

LED INDICATOR

The SP670 uses a multi-colored LED to indicate operational status.

Orange blinking LED –SP670 is on and ready to connect to the smart device

Green blinking LED –SP670 is connected to a smart device

Red blinking LED –Batteries need to be replaced

AUTO POWER OFF

If the SP670 is not connected to a smart device for more than 8 minutes it will auto power off. When

connected to a smart device the auto power off is disabled.

SCHRADER VALVE DEPRESSOR ADJUSTMENT

The SP670 uses an adjustable Schrader valve depressor. This is useful for use on worn Schrader

valves. If the depressor is unable to engage the valve enough to open it, the SP670 depressor can be

adjusted outward to make better contact.

1. Using needle nose pliers, carefully turn the Schrader valve depressor of the SP670 counter

clockwise so it is further out towards the fitting opening. This will allow it to engage the test port

valve. See picture below.

GENERAL MAINTENANCE

Housing: The SP670 can be wiped down with a damp lint free cloth. Do not use any cleaning agents

including solvent or soap.

Battery Replacement: When the LED indicator blinks Red the batteries need to be replaced.

1. Turn the SP670 off. Loosen the battery cover screw and open the cover.

2. Remove the three AAA batteries from the battery holder.

3. Install three new AAA alkaline batteries into the holder observing correct polarity. Note:

Battery level is displayed in the Smart Probe app.

Schrader Depressor and Gasket: The white gasket that seals the SP670 probe to a service port can

wear over time causing leaks. In addition the Schrader depressor can also wear or be damaged.

Overtightening or connection to damaged ports can also cause this.

Follow these steps to replace the Schrader depressor and/or the gasket.

1. Using needle nose pliers, grasp the Schrader

depressor and turn valve counter clockwise.

2 Remove and replace the Schrader depressor

and/or the worn gasket.

3 Install the gasket and screw in the Schrader depressor. (New Schrader depressor and gasket are

part number A670)

SPECIFICATIONS

Pressure Range

-14.7 psi to 870 psi (-1 bar to 60 bar)

Over Pressure Range

1000 psi (70 bar)

Input Connection

7/16"-20 UNF / ¼" SAE

Resolution

0.1 psi / 0.01 bar

Accuracy

+/- 0.5% of full scale

Battery Life

Approximately 160 hours

Battery Type

AAA x 3 alkaline

Operating Temperature

32 °F to 122 °F (0 °C to 50 °C)

Storage Temperature

-4 °F to 140 °F (-20 °C to 60 °C)

Humidity

0 to 80 %RH

Weight

5.64oz (160g)

Bluetooth

5.0 (350 foot range depending on obstacles)

See www.tpieurope.com for CE and UKCA Certificate of Conformity

FCC ID: QOQBGM113

IC (Industry Canada) ID: 5123A-BGM113

209-J00204

SP670 STANDARD ACCESSORIES

A670SP –Soft Pouch for SP670

SP670 OPTIONAL ACCESSORIES

A670 –Replacement Schrader valve depressor and gasket

A931 –Carrying case capable of holding (2) SP670 pressure probes, (2) SP323 temperature clamps,

and (2) A597 humidity probes

WARRANTY

This product is warranted to the purchaser against defects in material and workmanship for three years

from the date of purchase.

Covered by Warranty: Repair parts and labor; or replacement of the product at company’s option.

Normal transportation charges to the purchaser are also covered.

Not Covered by Warranty: Damages to the product which are the result of abuse, improper use or

maintenance are not covered. Any other expense, consequential damages, incidental damages, or

incidental expenses including damages to property are not covered. Transportation expenses to the

company are not covered.

Some states do not allow the exclusion or limitation of incidental or consequential damages, so the

above limitations or exclusions may not apply to you.

To Obtain Warranty Performance: Include with the product: your name, address, phone number,

written description of the problem and proof of purchase date. Carefully package and return to:

TPI, Inc. TPI Canada TPI, Europe Ltd..

9615 SW Allen Blvd. 342 Bronte Rd. S., Unit 6 Unit 6

Beaverton, OR 97005 Milton, Ontario L9T 5B7 Rutherford Way Industrial Estate

USA Canada Rutherford Way

503-520-9197 905-693-8558 Manor Royal

www.testproductsintl.com www.tpicanada.com Crawley

West Sussex

RH10 9LN

+44 (0) 1293 53019

www.tpieurope.com

Implied Warranties: Any implied warranties including implied warranties of merchantability and fitness

for a particular purpose, are limited in duration to three years from date of purchase. To the extent any

provision of this warranty is prohibited by federal or state law and cannot be preempted, it shall not be

applicable. This warranty gives you specific legal rights, and you may also have other rights which vary

from state to state.

NOTES

Test Products International, Inc.

9615 SW Allen Blvd., Ste. 104

Beaverton, OR 97005

Tel: 503-520-9197

www.testproductsintl.com

Test Products International, Ltd.

342 Bronte Road South, Unit #6

Milton Ontario Canada L9T

5B7 Tel: 905-693-8558

www.tpicanada.com

Test Products International Europe Ltd.

Rutherford Way Industrial Estate

Rutherford Way

Manor Royal

Crawley

West Sussex

RH10 9LN

www.tpieurope.com

Table des matières

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur