TPI SP555 Manuel utilisateur

SP555 Vane Air Velocity

Smart Probe

Test Products International, Inc.

Uses a vane sensor for accurate

air velocity measurements.

Test the TPI Advantage

Visit www.testproductsintl.com

Measures Air Velocity and Temperature;

calculates CFM (Volume)

Connects to mobile device and uses the

TPI View App

Perform average air velocity and air vol-

ume tests

3 Year Limited Warranty

Download the TPI View App

Download the TPI View app from the Apple® app

store or the Google® play store to begin using

your smart probe.

TABLE OF CONTENTS

A. Introduction........................................................................ 1

B. Safety Considerations......................................................... 1

C. Specifications..................................................................... 1

D. Instrument Overview.......................................................... 2

E. Taking a Measurement........................................................ 3

F. Additional App Features...................................................... 4

Performing Air Volume (Flow) Tests.................................... 5& 6

Maintenance........................................................................ 7

Trouble Shooting................................................................ 7

Replacing Batteries............................................................... 8

Accessories....................................................................... 8

Download the TPI View App

Download the TPI View app from the Apple® app store or the Google®

play store to begin using your smart probe.

A. INTRODUCTION

1. Congratulations: Thank you for purchasing TPI products. The SP555 is easy

to use and built to last. It is backed by a 3 year limited warranty.

2. Product Description: The SP555 is a vane velocity “Smart Probe”. It connects

to your mobile device and uses the TPI View App to display air velocity, CFM,

and temperature readings.

B. SAFETY CONSIDERATIONS

1. Never insert the sensor into hot air.

2. Never allow a foreign object into the sensor cage. The sensor may be

damaged.

3. Do not expose the unit to damp environments for extended periods of time.

C. SPECIFICATIONS

D. INSTRUMENT OVERVIEW

E. TAKING AMEASUREMENT

1. Download and install the TPI

View App onto your mobile

device. Run the App. Select the

region for your area. The Main

Screen will be displayed. Press

and hold the SP555 On/Off key

down until it turns on. Tap on

"Tap to start scanning for TPI

smart instruments" to discover

the 555.

2. Tap on SP555 to connect to

the SP555. The LED indicator

will turn Green and blink to

indicate a link has been

established.

The Live Anemometer screen

will display in the App.

The Volume Flow, Velocity,

and Temperature will be

displayed. Tapping on a

reading will change the unit of

measure.

The bottom area allows you to

select the type of duct and the

size of the duct. The size of the

duct is required to calculate

and display the Volume Flow.

F. ADDITIONAL APP FEATURES

1. Swiping left at the top of the app

allows access to the multi

average and timed average

functions. This allows traverse

measurements to be made to

obtain the average air velocity,

flow, and temperature.

2. Tapping “Duct Details” allows

the duct type (round or

rectangular) and size to be

set. This must be done to

display air flow (CFM).

Tapping the displayed

readings changes the unit of

measure.

3. The TPI View App includes a

job management feature.

Readings can be saved as a

job with customer information

and reports can be emailed as

necessary.

Reports can also be printed

from your smart device using

the optional A740BT

Bluetooth printer.

1. Turn the SP555 on and connect it to the TPI View App.

2. Select Timed Average in the TPI View App. Determine the type and size of

the duct (grill) and enter it into the View App.

3. Position the SP555 at one end of the grill. The arrow on top of the SP555

indicates the direction it should be oriented in the air flow.

4. Tap "Start Test" to begin the traverse test.

5. Move the SP555 along the grill from one end to the other. Once you reach

the end tap "Stop Test". (See Picture Below)

6. The average air velocity, air flow (CFM), and temperature will be displayed.

7. A report can be created and data can be saved to a job by tapping on

"Create Report".

Note: Pause can be tapped to pause testing and then continued. This can be

used if the SP555 needs to be re-positioned during the test. This can be

helpful for large grills.

G. AIR VOLUME MEASUREMENT - TRAVERSING GRILLS

To do a proper airflow measurement (CFM) you should do traverse readings to

obtain the true average airflow through the grill. There are two ways to perform

this test using the SP555, Timed Average Traverse and Multi Average Traverse.

Time based is typically easier but both are explained in the next sections.

Time Average Traverse

Multi Average Traverse

1. Turn the SP555 on and connect it to the TPI View App.

2. Select Multi Average in the TPI View App. Determine the type and size of the

duct (grill) and enter it into the View App.

3. Position the SP555 at one end of the grill. The arrow on top of the SP555

indicates the direction it should be oriented in the air flow.

4. Tap "Start Test" to begin the traverse test.

5. Move the SP555 along the grill from one end to the other stopping at test

points. Once stopped tap "Add to Average" to add the reading to the overall

average readings. NOTE: Stop every inch or so. The more readings you add

to the average the more accurate the average will be. Once you reach the

end tap "Stop Test". (See Picture Below)

6. The average air velocity, air flow (CFM), and temperature will be displayed.

7. A report can be created and data can be saved to a job by tapping on

"Create Report".

Stop at each test point and tap "Add To

Average". The more test points added

the more accurate the average will be.

H. MAINTENANCE

1. Clean the surface of the instrument with a damp cloth.

2. Replace the three AAA batteries when the low battery indicator

appears. (See page 8)

I. TROUBLE SHOOTING

Probable Cause

Symptom

Velocity seems inaccurate. •Low battery.

SP565 does not turn on. •Dead or low batteries.

•Not holding down power switch

until unit turns on.

•Defective POWER ON switch.

Air velocity readings seem low •Dead or low batteries.

•Protective hood not open all the

way.

•Sensor not turned completely

into the air stream.

J. ACCESSORIES

Included Accessories

Part Number Description

A555SP Soft pouch

Optional Accessories

Part Number Description

A925 Carrying case for 4 smart

probes

A926 Carrying case for 1 or 2

smart probes

This product is warranted to the purchaser against defects in material and workmanship for three years from the

date of purchase.

Covered by Warranty: Repair parts and labor; or replacement of the product at company’s option. Normal trans-

portation charges to the purchaser are also covered.

Not Covered by Warranty: Damages to the product which are the result of abuse, improper use or maintenance are

not covered. Any other expense, consequential damages, incidental damages, or incidental expenses including dam-

ages to property are not covered. Transportation expenses to the company are not covered.

Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limita-

tions or exclusions may not apply to you.

To Obtain Warranty Performance: Include with the product: your name, address, phone number, written descrip-

tion of the problem and proof of purchase date. Carefully package and return to:

TPI, Inc. TPI Canada TPI, Europe Ltd..

9615 SW Allen Blvd. 342 Bronte Rd. S., Unit 6 Longley House, International Drive

Beaverton, OR 97005 Milton, Ontario L9T 5B7 Southgate Crawley

USA Canada West Sussex RH10 6AQ England

503-520-9197 905-693-8558 44(0) 1293 530196

www.testproductsintl.com www.tpicanada.com www.tpieurope.com

Implied Warranties: Any implied warranties including implied warranties of merchantability and fitness for a par-

ticular purpose, are limited in duration to three years from date of purchase. To the extent any provision of this war-

ranty is prohibited by federal or state law and cannot be preempted, it shall not be applicable. This warranty gives

you specific legal rights, and you may also have other rights which vary from state to state.

L. REPLACING BATTERIES

1. Turn the battery

compartment

screw counter

clockwise until

it is just above

the compart-

ment door. Lift

on the screw to

open the com-

partment.

2. Replace the three

AAA batteries.

3. Re-install the battery cover and tighten the

screw by turning it clockwise.

K. WARRANTY

Table des matières

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur