TPI 623 Manuel utilisateur

623

Digital Manometer

Instruction Manual

www. .com information@itm.com1.800.561.8187

Table of Contents

Page 3 Introduction & Product Description

Page 4 Safety Considerations

Page 5 Technical Data & International Symbols

Page 6 Features & Benefits

Page 7 Pressure Conversion Table

Page 8 Step by Step Procedures

Page 10 Accessories & Specifications

Page 11 Maintenance

Page 12 Trouble shooting guide

Page 13 EC declaration of conformity

www. .com information@itm.com1.800.561.8187

Introduction

Congratulations

Thank you for purchasing TPI brand products. This

meter is easy to use and is built to last. It is backed

by a 2 year limited warranty. Please remember to

return your product warranty registration card.

Product Description

The TPI 623 is a hand held pressure meter with supe-

rior resolution .

Auto Range -100.0 to -100.0 mbar

-40.0 to 40.0 inH2O

Resolution 0.001 inH2O / 0.01 inH2O

Accuracy < +/-2 inH2O: ±(0.02 inH2O)

> +/- 2 inH2O: ±(1% of reading)

Over Pressure Protected to 50 inH2O

Power Supply 9V

www. .com information@itm.com1.800.561.8187

Safety Considerations

WARNING: Please follow the manufacturer's test

procedure whenever possible. Make sure the

pressure to be measured is not outside the range

of the TPI 623 meter.

ALWAYS

• Test the pressure meter before use to ensure it

is operating properly

• Ensure that the connecting hose you are using

is free from kinks or splits

• Double check all connections before testing

NEVER

• Connect the Instrument to an unknown pres-

sure source if the source is twice the working

pressure of the instrument the sensor will be

damaged and may cause injury to the user

• Tamper with the instrument or attempt to

modify it in any way. Otherwise, accident and

injury may occur and the warranty becomes

void.

4www. .com information@itm.com1.800.561.8187

Technical Data

Controls

Turns the 623 on. Hold down to turn unit

off.

ZERO Momentarily press the button to

“ZERO” the dispaly (“ZERO” will temporari-

ly display in the lower left of the LCD)

=Smoothing function to stabilize rapidly

changing pressure readings

UNITS Selects 7 units of pressure kPa, PSI, inHg,

mmHg, inH2O, mmH2O, mbar

Turns the back light on (automatically turns

off after 30 seconds)

www. .com information@itm.com1.800.561.8187

Features & Benefits

Autoranging - Provides high resolution &

accuracy at low

Auto Power Off - Powers off after 40 minutes to

conserve battery life.

Trim Mode - Smoothing function to stabilize

erratic readings. It displays the

average value of 4 values

previously measured.

Zero Function - Provides immediate push button

zeroing for Speed and accuracy.

Units - Change the display value in any

one of the following engineering

units. kPa, PSI, inHg, mmHg,

inH20, mmH20 and mbar.

Back Light - Provides easy reading of LCD in

low light areas.

6www. .com information@itm.com1.800.561.8187

Atmos bar inHg inH2OPSI mmHg mmH20Pascals

Atmos 19.86923

x 10-1

3.34207

x 10-2

2.458

x 10-3

6.8046

x 10-2

1.316

x 10-3

0.9677

x 10-4

9.869

x 10-6

bar 1.01325 13.3864

x 10-2

2.491

x 10-3

6.8948

x 10-2

1.333

x 10-3

0.9807

x 10-4

1.000

x 10-5

inHg 29.9213 29.53 17.355

x 10-2 2.036 3.937

x 10-2

2.89567

x 10-3

2.953

x 10-4

inH2O406.8 401.48 13.60 127.68 0.5354 3.937

x 10-2

4.014

x 10-3

PSI 14.6955 14.504 0.4912 3.6127

x 10-2 11.934

x 10-2

1.422323

x 10-3

1.4503

x 10-3

mmHg 760 750.06 25.400 1.868 51.715 17.35433

x 10-2

7.502

x 10-3

mmH2O10.3327

x 103

10.1976

x 103

3.4544

x 10225.400 703.07 13.599 1.101972

Pascals 1.01325

x 105

1.000

x 105

3.386

x 103

2.491

x 102

6.8948

x 103

1.333

x 1029.8071 1

Pressure Coverstion Table

www. .com information@itm.com1.800.561.8187

Step by Step Procedures

Note:

The 623 incorporates a differential manometer.

This means when a single hose is connected to

the (+) port and pressure is applied, the 623 will

read positive pressure. If a single hose is con-

nected to the (-) port and pressure is applied,

the 623 will read a negative pressure. If both

ports are connected to a pressure, the 623 will

read the difference (P1 - P2) between the two.

When performing single pressure measurments

(non-differential) use the positive port and leave

the negative port open.

8www. .com information@itm.com1.800.561.8187

Step by Step Procedures (continued)

1. Press the 'ON' key and the LCD display will be

activated and automatically zeroed (if it does not

read 0.00 proceed as follows

2. Momentarily Press the key and the display

should zero within +/- 0.01 if not repeat until it

does

3. Connect pressure meter to installation or

equipment to be tested using appropriate hose

connection in accordance with the manufacturers

instructions

4. The pressure reading will appear on the display.

To activate the backlight in poor light conditions

press the key at any time

5. If the reading is erratic or changing activate the

smoothing function by pressing the '=' key

6. To convert the displayed pressure reading to

another engineering unit depress the 'UNIT' key

anytime and scroll through to the desired units of

pressure.

www. .com information@itm.com1.800.561.8187

Accessories & Specifications

Standard accessories

9V battery. . . . . . . . . . . . . . . . . . . . . .A009

Soft Pouch . . . . . . . . . . . . . . . . . . . . . .A600

Protective boot with magnets . . . . . . . A6XX

Silicone tubing w/ 1/4” barbed

1/8” NPT fitting. . . . . . . . . . . . . . . . . . A603

Specifications

Auto Range -100.0 to -100.0 mbar

-40.0 to 40.0 inH2O

Resolution 0.001 inH2O / 0.01 inH2O

Accuracy < +/-2 inH2O: ±(0.02 inH2O)

> +/- 2 inH2O: ±(1% of reading)

Over Pressure Protected to 50 inH2O

Power Supply 9V

Relative Humidity 0% to 80%

Operating Temp. 0ºC to +40ºC

Storage Temp. -10ºC to +50ºC

Auto Power Off 20 Minutes

Input Type Differential

10 www. .com information@itm.com1.800.561.8187

Table des matières

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur