Texas Instruments TMS570 Manuel utilisateur

The platform bar and Code Composer Studio are trademarks of Texas Instruments. All other trademarks are the

Quick Start Guide: TMS570

Microcontroller Development Kit

TMS570 Microcontroller Development Kit Features:

- 337p BGA TMS570LS20216 MCU

- CPU Card and I/O Base Board

- On Board USB XDS100v2 JTAG

- Ambient Light & Temp Sensors

- 3 CAN Transceivers

- 2 FlexRay Transceivers

- 1 LIN Tranceiver

- On Board SCI to USB Serial

- Color Touch Screen LCD

- NHET and GIO LEDs

- 1 RS485 Transceiver

- Multiple Sensor Interfaces

Board Conﬁdence Test & Demo Features:

- Temperature and Ambient Light Sensor Bar Graph Demo

- SD-Card ID and Size Identiﬁcation

- Memory Test for on board RAM, FRAM and EEPROM

- Input Sensor Voltage Display

Temperature and Ambient Light Demo

The full MDK user guide may be viewed at:

http://www.keil.com/support/man/docs/mcbtms570

User Interface

The TMS570 Microcontroller Development Kit (MDK) is ideal for evaluating and starting development with the TMS570 family of

devices. It is comprised of a CPU card and an I/O base board. The kit contains on board XDS100v2 JTAG emulation along with

access to several key communication and peripheral interfaces.

Board Conﬁdence Test & Demo: The TMS570 Microcontroller Development Kit (MDK) Conﬁdence Test &

Demo Application allows veriﬁcation most functions of the CPU and I/O board’s functionality. It also provides a

demonstration of some of the kit’s functionality. This application comes pre-programmed into the TMS570 ﬂash

memory and will automatically run when the +12V DC power supply is connected to the kit. The demonstration

is controlled using the menus on the board’s LCD. The application is included on the MDK DVD and can re-

programmed at a later time.

IMPORTANT: Code Composer Studio 4.x or the TMS570 Safety MCU Demo software must be installed

before the USB mini-B cable for the CPU card’s XDS00v2 JTAG is plugged into the PC!

337p (BGA)

TMS570LS20216 MCU

Light Temperature

USB mini-B: XDS100v2

JTAG SCI to USB

+12V DC Power Input

MIPI

DCAN3

DCAN2

DCAN1

LIN2

20 pin JTAG

RS485

FlexRay

LCD Touch Screen

Micro SD

Sensor Interface

GIO & NHET LEDs

Pressure Sensor

Medical

Push Buttons

Relay Solenoid Drivers

Quick Start Guide:

TMS570 Microcontroller Development Kit Demos

Install the TMS570 MCU Development Kit Software. A full install is required to ensure that all demo

features of the MCU Development Kit are available.

Plug in the +12V power supply into the MDK CPU card and connect the USB mini-B cable

between the MDK CPU card and a USB port on the PC. The PC will recognize the MDK board

as an XDS100v2 JTAG Emulator and a USB Serial port. NOTE: The board conﬁdence test

comes pre-programmed in the TMS570 ﬂash memory and will be overwritten by the Safety

MCU Demo program.

IMPORTANT: Code Composer Studio 4.x or the TMS570 Safety MCU Demo software must be installed

before the USB mini-B cable for the CPU card’s XDS00v2 JTAG is plugged into the PC!

Start the TMS570 Safety Demo Software. In Windows XP the software will be available in

‘Start->All Programs->Texas Instruments->TMS570 Safety MCU Demos.

Launch any of the TMS570 Demos from the launch pad. Internet access is required to view

the device documentation. Code Composer Studio must be installed to view the microcontroller

source code.

EVALUATION BOARD/KIT IMPORTANT NOTICE

Texas Instruments (TI) provides the enclosed product(s) under the following conditions:

This evaluation board/kit is intended for use for ENGINEERING DEVELOPMENT, DEMONSTRATION, OR EVALUATION PURPOSES ONLY and is not

considered by TI to be a ﬁnished end product ﬁt for general consumer use. Persons handling the product(s) must have electronics training and

observe good engineering practice standards. As such, the goods being provided are not intended to be complete in terms of required design-,

marketing-, and/or manufacturing related protective considerations, including product safety and environmental measures typically found in end

products that incorporate such semiconductor components or circuit boards.

The user assumes all responsibility and liability for proper and safe handling of the goods. Further, the user indemniﬁes TI from all claims arising

from the handling or use of the goods. Due to the open construction of the product, it is the user’s responsibility to take any and all appropriate

precautions with regard to electrostatic discharge. EXCEPT TO THE EXTENT OF THE INDEMNITY SET FORTH ABOVE, NEITHER PARTY SHALL

BE LIABLE TO THE OTHER FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES. TI assumes no liability for applications

assistance, customer product design, software performance, or infringement of patents or services described herein.

USB mini-B

+12V

Autres manuels Texas Instruments Microcontrôleur

Texas Instruments

Texas Instruments Silicon Errata TMS320F28379S Manuel utilisateur

Texas Instruments

Texas Instruments 430BOOST-SENSE1 Manuel utilisateur

Texas Instruments

Texas Instruments TUSB3210 Manuel utilisateur

Texas Instruments

Texas Instruments LaunchPad C2000 F280015 Series Manuel utilisateur

Texas Instruments

Texas Instruments RM48 series Manuel du produit

Texas Instruments

Texas Instruments CC3235MODSF SimpleLink Manuel utilisateur

Texas Instruments

Texas Instruments LaunchPad CC2650 Manuel utilisateur

Texas Instruments

Texas Instruments MSP430 series Manuel utilisateur

Texas Instruments

Texas Instruments MSP430F6747 Manuel utilisateur

Texas Instruments

Texas Instruments bq24707EVM Manuel utilisateur

Texas Instruments

Texas Instruments Concerto F28M35 Series Manuel du produit

Texas Instruments

Texas Instruments MSP432 Manuel utilisateur

Texas Instruments

Texas Instruments MSP43 series Manuel utilisateur

Texas Instruments

Texas Instruments LaunchPad MSP-EXP430F5529LP Manuel utilisateur

Texas Instruments

Texas Instruments PGA460-Q1 Manuel utilisateur

Texas Instruments

Texas Instruments BQ769142 Manuel utilisateur

Texas Instruments

Texas Instruments MSP430F6726 Manuel utilisateur

Texas Instruments

Texas Instruments MSP430F6765 Manuel utilisateur

Texas Instruments

Texas Instruments Serial Programming Adapter MSP430 Manuel utilisateur

Texas Instruments

Texas Instruments TLC6C5712-Q1 Manuel utilisateur

Texas Instruments

Texas Instruments MSPM0G310 Series Manuel utilisateur

Texas Instruments

Texas Instruments MSP430F6735 Manuel utilisateur

Texas Instruments

Texas Instruments Vision SDK Linux Manuel utilisateur

Texas Instruments

Texas Instruments MSP430FG6626 Manuel utilisateur

Manuels Microcontrôleur populaires d'autres marques

AMS

AMS AS7261 Demo Kit Manuel utilisateur

Novatek

Novatek NT6861 Manuel utilisateur

Espressif Systems

Espressif Systems ESP8266 SDK Guide de configuration

Nuvoton

Nuvoton ISD61S00 ChipCorder Mode d’emploi

STMicrolectronics

STMicrolectronics ST7 Assembler Linker Manuel utilisateur

Lantronix

Lantronix Intrinsyc Open-Q 865XR SOM Manuel utilisateur

NEC

NEC 78GK0S/K 1+ Series Instructions d'installation et d'utilisation

Mikroe

Mikroe SEMITECH N-PLC Click Instructions d'installation et d'utilisation

Intel

Intel Agilex Manuel utilisateur

Cypress

Cypress CY4607 HX2VL Manuel utilisateur

DIGITAL-LOGIC

DIGITAL-LOGIC MICROSPACE Manuel utilisateur

CYPRES

CYPRES CY14NVSRAMKIT-001 Manuel utilisateur

Espressif Systems

Espressif Systems ESP8266EX Mode d'emploi

Abov

Abov AC33M8128L Manuel utilisateur

Laird

Laird BL654PA Manuel utilisateur

Silicon Laboratories

Silicon Laboratories C8051F800 Manuel utilisateur

Energy micro

Energy micro EFM32 Giant Gecko Starter Kit Manuel utilisateur

Mikroe

Mikroe click Proximity 2 Manuel utilisateur