Texas Instruments DA8xx EVM PSP Manuel utilisateur

DA8xx EVM PSP User’s Guide

Literature Number: SPRUGL9

March 2009

IMPORTANT NOTICE

Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements,

improvements, and other changes to its products and services at any time and to discontinue any product or service without notice.

Customers should obtain the latest relevant information before placing orders and should verify that such information is current and

complete. All products are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment.

TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI's standard

warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except

where mandated by government requirements, testing of all parameters of each product is not necessarily performed.

TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and

applications using TI components. To minimize the risks associated with customer products and applications, customers should

provide adequate design and operating safeguards.

TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask

work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services

are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such

products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under

the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI.

ReproductionofinformationinTIdatabooksordatasheetsispermissibleonlyifreproductioniswithoutalterationandisaccompanied

by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and

deceptivebusinesspractice.TI is notresponsibleorliablefor suchaltereddocumentation.Information ofthird partiesmaybe subject

to additional restrictions.

Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service

voidsallexpressand anyimpliedwarrantiesforthe associatedTI productorserviceandisan unfairanddeceptivebusinesspractice.

TI is not responsible or liable for any such statements.

TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would

reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement

specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications

of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related require-

ments concerning their products and any use of TI products in such safety-critical applications, notwithstanding any applications-

related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its representatives against

any damages arising out of the use of TI products in such safety-critical applications.

TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are

specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military

specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is

solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection

with such use.

TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products

are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-

designated products in automotive applications, TI will not be responsible for any failure to meet such requirements.

Following are URLs where you can obtain information on other Texas Instruments products and application solutions:

Mailing Address: Texas Instruments, Post Office Box 655303 Dallas, Texas 75265

Products Applications

Amplifiers amplifier.ti.com Audio www.ti.com/audio

Data Converters dataconverter.ti.com Automotive www.ti.com/automotive

DLP® Products www.dlp.com Broadband www.ti.com/broadband

DSP dsp.ti.com Digital Control www.ti.com/digitalcontrol

Clocks and Timers www.ti.com/clocks Medical www.ti.com/medical

Interface interface.ti.com Military www.ti.com/military

Logic logic.ti.com Optical Networking www.ti.com/opticalnetwork

Power Mgmt power.ti.com Security www.ti.com/security

Microcontrollers microcontroller.ti.com Telephony www.ti.com/telephony

RFID www.ti-rfid.com Video & Imaging www.ti.com/video

RF/IF and ZigBee® Solutions www.ti.com/lprf Wireless www.ti.com/wireless

EVALUATION BOARD/KIT IMPORTANT NOTICE

Texas Instruments (TI) provides the enclosed product(s) under the following conditions:

This evaluation board/kit is intended for use for ENGINEERING DEVELOPMENT, DEMON-

STRATION, OR EVALUATION PURPOSES ONLY and is not considered by TI to be a finished

end-productfitforgeneralconsumeruse.Personshandlingtheproduct(s)musthaveelectronics

training and observe good engineering practice standards. As such, the goods being provided

are not intended to be complete in terms of required design-, marketing-, and/or manufacturing-

relatedprotectiveconsiderations,includingproductsafetyandenvironmentalmeasurestypically

found in end products that incorporate such semiconductor components or circuit boards. This

evaluation board/kit does not fall within the scope of the European Union directives regarding

electromagneticcompatibility, restrictedsubstances(RoHS),recycling(WEEE),FCC,CEorUL,

and therefore may not meet the technical requirements of these directives or other related

directives.

Should this evaluation board/kit not meet the specifications indicated in the User's Guide, the

board/kit may be returned within 30 days from the date of delivery for a full refund. THE FORE-

GOING WARRANTY IS THE EXCLUSIVE WARRANTY MADE BY SELLER TO BUYER AND

IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED, IMPLIED, OR STATUTORY, IN-

CLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR

PURPOSE.

The user assumes all responsibility and liability for proper and safe handling of the goods.

Further, the user indemnifies TI from all claims arising from the handling or use of the goods.

Due to the open construction of the product, it is the user's responsibility to take any and all

appropriate precautions with regard to electrostatic discharge.

EXCEPT TO THE EXTENT OF THE INDEMNITY SET FORTH ABOVE, NEITHER PARTY

SHALL BE LIABLE TO THE OTHER FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CON-

SEQUENTIAL DAMAGES.

TI currently deals with a variety of customers for products, and therefore our arrangement with

the user is not exclusive.

TI assumes no liability for applications assistance, customer product design, software

performance, or infringement of patents or services described herein.

PleasereadtheUser'sGuideand,specifically,theWarningsandRestrictionsnoticeintheUser's

Guide prior to handling the product. This notice contains important safety information about

temperatures and voltages. For additional information on TI's environmental and/or safety pro-

grams, please contact the TI application engineer or visit www.ti.com/esh.

No license is granted under any patent right or other intellectual property right of TI covering or

relating to any machine, process, or combination in which such TI products or services might

be or are used.

Mailing Address:

Texas Instruments

Post Office Box 655303

Dallas, Texas 75265

FCC Warning

This evaluation board/kit is intended for use for ENGINEERING DEVELOPMENT, DEMON-

STRATION, OR EVALUATION PURPOSES ONLY and is not considered by TI to be a finished

end-product fit for general consumer use. It generates, uses, and can radiate radio frequency

energy and has not been tested for compliance with the limits of computing devices pursuant

to part 15 of FCC rules, which are designed to provide reasonable protection against radio

frequency interference. Operation of this equipment in other environments may cause interfer-

ence with radio communications, in which case the user at his own expense will be required to

take whatever measures may be required to correct this interference.

This is a draft version printed from file: pref.fm on 3/31/09

Preface

About This Guide

This document describes how to install and get started with TI's Linux

Platform Support Product (PSP) 02.20 package for the DA8xx Evaluation

Module (EVM).

This document describes the following:

❏Installing the PSP package

❏Building the PSP package

❏Running U-Boot and Linux kernel on the EVM

Intended Audience

This document is intended for system engineers who want to get started

using the Linux PSP package for DA8xx EVM board.

This document assumes you have knowledge of the DA8xx EVM

platform and have basic knowledge about installing and using software

on embedded Linux platforms.

Notational Conventions

This document uses the following conventions:

❏When the pound sign (#) is used in filenames or directory paths (for

example, PSP_02_20_#_#/bin), you should replace the # sign with

the version number of the PSP release you are using. A # sign may

represent one or more digits of a version number.

❏Program listings, program examples, and interactive displays are

shown in a mono-spaced font. Examples use bold for emphasis,

and interactive displays use bold to distinguish commands that you

enter from items that the system displays (such as prompts,

command output, error messages, etc.).

❏Square brackets ( [ and ] ) identify an optional parameter. If you use

an optional parameter, you specify the information within the

brackets. Unless the square brackets are in a bold typeface, do not

enter the brackets themselves.

Additional Documents and Resources

You can use the following resources to supplement this guide:

❏Other PDF documents included with the kit

Trademarks

The Texas Instruments logo and Texas Instruments are registered

trademarks of Texas Instruments. Trademarks of Texas Instruments

include: TI, DaVinci, the DaVinci logo, XDS, Code Composer, Code

Composer Studio, Probe Point, Code Explorer, DSP/BIOS, RTDX, Online

DSP Lab, DaVinci, eXpressDSP, TMS320, TMS320C6000,

TMS320C64x, TMS320DM644x, and TMS320C64x+.

MS-DOS, Windows, and Windows NT are trademarks of Microsoft

Corporation.

UNIX is a registered trademark of The Open Group in the United States

and other countries.

Linux is a registered trademark of Linus Torvalds.

Solaris, SunOS, and Java are trademarks or registered trademarks of

Sun Microsystems, Inc.

All other brand, product names, and service names are trademarks or

registered trademarks of their respective companies or organizations.

March 31, 2009

vii

This is a draft version printed from file: davinci_gsgTOC.fm on 3/31/09

Contents

1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-1

This chapter introduces the DA8xx EVM Platform Support Product (PSP).

1.1 What is a Platform Support Product (PSP) Package? . . . . . . . . . . . . . . . . . . . . . . . . . .1-2

1.2 About this User Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-2

2 Installing the Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-1

This chapter describes the installation procedure for the DA8xx EVM Linux PSP package.

2.1 Downloading the Release. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-2

2.2 System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-2

2.2.1 Host Platform Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-2

2.2.2 Host Software Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-2

2.2.3 Target Hardware Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-3

2.3 Running the Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-3

2.4 QuickStart Steps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-4

3 Flashing and Booting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-1

This chapter describes how to run the target content that is provided as a part of the PSP package.

3.1 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-2

3.2 Flashing Boot Images to SPI Flash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-2

3.3 Booting from SPI Flash. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-3

3.4 Booting the Linux Kernel Using U-Boot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-4

3.4.1 Booting from SDRAM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-5

3.4.2 Booting from SPI Flash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-5

3.4.3 Booting from NAND Flash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-6

3.4.4 Booting from NOR Flash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-6

3.4.5 Booting from USB Storage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-7

3.5 Loading Linux Kernel Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-9

3.5.1 Loading USB 2.0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-9

4 Building PSP Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-1

This chapter explains how to build various components of the PSP.

4.1 Building U-Boot. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-2

4.2 Building a New Linux Kernel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-3

4.2.1 USB 2.0 Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-4

4.2.2 USB 1.1 Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-6

4.2.3 Audio Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-7

Contents

viii

4.2.4 Graphical LCD Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7

4.2.5 Character LCD Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-8

4.2.6 NAND Flash Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-8

4.2.7 NOR Flash Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-9

4.2.8 MMC/SD Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-9

4.3 Building the User Boot Loader (UBL) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-10

4.4 Building Flash Writers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-11

4.4.1 Building a NAND Writer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-11

4.4.2 Building an SPI Flash Writer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-12

A Additional Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1

This appendix describes optional procedures you may use depending on your setup and specific

needs.

A.1 Building the DSP AIS Binary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2

A.2 Setting Up a TFTP Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-3

1-1

Chapter 1

Introduction

This chapter introduces the DA8xx EVM Platform Support Product

(PSP).

1.1 What is a Platform Support Product (PSP) Package? . . . . . . . . . . . 1–2

1.2 About this User Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–2

Topic Page

What is a Platform Support Product (PSP) Package?

1-2

1.1 What is a Platform Support Product (PSP) Package?

This document describes how to install and get started with TI's Linux

Platform Support Product (PSP) 02.20 package for the DA8xx Evaluation

Module (EVM).

This PSP package supports the DA8xx EVM. This PSP package includes

the following components:

❏Demonstration version of MontaVista (MV) Linux Pro 5.0 (Kernel

Version 2.6.18) ported for DA8xx EVM. The kernel is compiled with

MV Pro 5.0 ToolChain based on GCC 4.2.0.

❏U-Boot version 1.3.3 ported for DA8xx EVM. The U-Boot is

compiled with MV Pro 5.0 ToolChain based on GCC 4.2.0.

❏User Boot Loader (UBL). This is the primary boot software which

copies U-Boot to SDRAM and starts it. This software requires

CCStudio 3.3 for building.

❏SPI and NAND flash writers. These are Code Composer Studio

(CCStudio) based utilities. CCStudio v4.0 is supported on the DA830

EVM.

1.2 About this User Guide

❏Chapter 2, "Installing the Package", describes the installation

procedure for DA8xx EVM Linux PSP package.

❏Chapter 3, "Flashing and Booting", describes how to run U-Boot and

Linux kernel on the DA8xx EVM.

❏Chapter 4, "Building PSP Components", describes the build

procedure for U-Boot and Linux kernel.

Note: Please see the release notes included in the package before starting

to use the package. The release notes contain important information about

feature support, issues, and compatibility information for a particular

release.

Table des matières

Autres manuels Texas Instruments Microcontrôleur

Texas Instruments

Texas Instruments CC3220-LAUNCHXL Manuel utilisateur

Texas Instruments

Texas Instruments MSP430F22x4 Series Manuel utilisateur

Texas Instruments

Texas Instruments MSPM0L1306 Manuel utilisateur

Texas Instruments

Texas Instruments LaunchPad MSP430FR2311 Manuel utilisateur

Texas Instruments

Texas Instruments CC2540DK-MINI Manuel utilisateur

Texas Instruments

Texas Instruments MSP430F6747 Manuel utilisateur

Texas Instruments

Texas Instruments MSP430F6733 Manuel utilisateur

Texas Instruments

Texas Instruments MSP430G2955 Manuel utilisateur

Texas Instruments

Texas Instruments CC2540 Manuel utilisateur

Texas Instruments

Texas Instruments TMS320C67 DSP Series Manuel utilisateur

Texas Instruments

Texas Instruments TMS370 Series Guide de l'utilisateur

Texas Instruments

Texas Instruments MSP430F67681 Manuel utilisateur

Texas Instruments

Texas Instruments TMS320F2807 Series Manuel utilisateur

Texas Instruments

Texas Instruments Jacinto7 Manuel utilisateur

Texas Instruments

Texas Instruments Stellaris LM3S9B96 Manuel utilisateur

Texas Instruments

Texas Instruments LaunchPad MSP430FR5994 Manuel utilisateur

Texas Instruments

Texas Instruments Chipcon Products CC2420 Manuel utilisateur

Texas Instruments

Texas Instruments CC2543 Manuel utilisateur

Texas Instruments

Texas Instruments MSP432P401R Manuel utilisateur

Texas Instruments

Texas Instruments CC3235 SimpleLink Series Manuel du produit

Texas Instruments

Texas Instruments TIDA-00830 Manuel utilisateur

Texas Instruments

Texas Instruments TMS570LS0 32 Series Manuel utilisateur

Texas Instruments

Texas Instruments SimpleLink Ethernet MSP432E401Y Manuel utilisateur

Texas Instruments

Texas Instruments LaunchPad MSP-EXP430F5529LP Manuel utilisateur

Manuels Microcontrôleur populaires d'autres marques

AMS

AMS AS7261 Demo Kit Manuel utilisateur

Novatek

Novatek NT6861 Manuel utilisateur

Espressif Systems

Espressif Systems ESP8266 SDK Guide de configuration

Nuvoton

Nuvoton ISD61S00 ChipCorder Mode d’emploi

STMicrolectronics

STMicrolectronics ST7 Assembler Linker Manuel utilisateur

Lantronix

Lantronix Intrinsyc Open-Q 865XR SOM Manuel utilisateur

NEC

NEC 78GK0S/K 1+ Series Instructions d'installation et d'utilisation

Mikroe

Mikroe SEMITECH N-PLC Click Instructions d'installation et d'utilisation

Intel

Intel Agilex Manuel utilisateur

Cypress

Cypress CY4607 HX2VL Manuel utilisateur

DIGITAL-LOGIC

DIGITAL-LOGIC MICROSPACE Manuel utilisateur

CYPRES

CYPRES CY14NVSRAMKIT-001 Manuel utilisateur

Espressif Systems

Espressif Systems ESP8266EX Mode d'emploi

Abov

Abov AC33M8128L Manuel utilisateur

Laird

Laird BL654PA Manuel utilisateur

Silicon Laboratories

Silicon Laboratories C8051F800 Manuel utilisateur

Energy micro

Energy micro EFM32 Giant Gecko Starter Kit Manuel utilisateur

Mikroe

Mikroe click Proximity 2 Manuel utilisateur