Texas Instruments TAS6584-Q1 EVM Manuel utilisateur
User’s Guide
TAS6584-Q1 EVM User's Guide
ABSTRACT
This manual describes the operation of the TAS6584Q1EVM. The TAS6584Q1EVM is a stand-alone EVM. The
PurePath™ Control Console 3 GUI (PPC3) is used to initialize and operate the EVM. The main topics of this
document are:
• Hardware implementation and descriptions
• Software implementation and descriptions
• TAS6584Q1EVM operations, both hardware and software
Required equipment and accessories:
1. TAS6584Q1EVM
2. DVDD power supply of 3.3 Vdc
3. VBAT power supply of 12 Vdc (see data sheet for allowed voltage range)
4. PVDD (see data sheet for allowed voltage range)
5. USB A male to micro B male cable
6. 1 to 4 resistive loads or speaker loads
7. 2 to 6 pairs of wires, stripped at both ends
8. 2 mm slotted screwdriver
9. Optical audio source and cable (optional)
10. Coaxial digital audio source and cable (optional)
11. Directly connected I2S or TDM source (optional)
12. Desktop or laptop PC with Microsoft® Windows® 7 or above operating system
Table of Contents
1 Hardware Overview................................................................................................................................................................ 2
1.1 TAS6584-Q1 Evaluation Module Description.....................................................................................................................2
1.2 TAS6584-Q1 EVM Start Up................................................................................................................................................2
2 Software Overview..................................................................................................................................................................3
2.1 PurePath™ Console 3 (PPC3) Access and Description.................................................................................................... 3
2.2 PurePath Console – TAS6584 EVM Entry Window........................................................................................................... 5
2.3 Start-Up IO Configuration Window.....................................................................................................................................5
2.4 Device Monitor and Control Window..................................................................................................................................6
2.5 Audio Processing Window................................................................................................................................................. 7
2.6 IO Configuration Window................................................................................................................................................... 7
2.7 Real-Time Measurements Window.................................................................................................................................... 8
2.8 Register Map Window........................................................................................................................................................ 8
2.9 Direct I2C Window..............................................................................................................................................................9
3 Schematic and Bill of Materials...........................................................................................................................................10
3.1 Board Layout....................................................................................................................................................................10
3.2 Schematics.......................................................................................................................................................................12
3.3 Bill of Materials.................................................................................................................................................................17
Trademarks
All trademarks are the property of their respective owners.
TI Confidential - Maximum Restrictions
www.ti.com Table of Contents
SLOU527 – DECEMBER 2021
Submit Document Feedback
TAS6584-Q1 EVM User's Guide 1
Copyright © 2021 Texas Instruments Incorporated
TI Confidential - Maximum Restrictions
1 Hardware Overview
1.1 TAS6584-Q1 Evaluation Module Description
The TAS6584-Q1 EVM is a stand-alone EVM. It requires three power supplies, USB control via Purepath Control
Console 3 (PPC3), and a digital audio input. The digital audio input can be provided through the USB, the optical
input, the coaxial input, or directly through the I2S/TDM headers.
1.2 TAS6584-Q1 EVM Start Up
This section describes the TAS6584-Q1 EVM start-up procedure. Have the equipment and accessories listed on
the first page of this document available.
Hardware Connections:
• Connect the three power supplies to 3.3Vdc, VBAT, and PVDD
• Connect speakers or resistive loads to J11
• Connect the USB micro cable from the PC to the EVM
• Set the switches S1 through S4 as needed. Typically, all will be down, except S4 will be up for Optical input.
S3 is down for Coaxial input. With S4 down, the USB audio is selected.
• Audio source: This can be a DVD player or audio test equipment with optical or coaxial SPDIF output or a
media player from the PC.
• Turn on the 3.3Vdc power supply and then turn on the VBAT and PVDD power supplies
• If SPDIF is selected the SPDIF lock LED will be illuminated with a valid SPDIF signal.
• Launch the TAS6584 EVM PPC3 plugin on the PC.
• Set up the device appropriately and follow the screens.
• Click the Connect button in the bottom left of the Status bar if not already connected
• Click on the Device Monitor and Control box and then click play at the top. Audio should be playing to all four
speaker outputs.
TI Confidential - Maximum Restrictions
Hardware Overview www.ti.com
2TAS6584-Q1 EVM User's Guide SLOU527 – DECEMBER 2021
Submit Document Feedback
Copyright © 2021 Texas Instruments Incorporated
2 Software Overview
2.1 PurePath™ Console 3 (PPC3) Access and Description
The PPC3 is a server-based tool. Access must be requested on . Once approval is given, go to to download
the software. After login, the webpage in the figure below will be shown with a list a software products that are
available to download.
TI Confidential - Maximum Restrictions
www.ti.com Software Overview
SLOU527 – DECEMBER 2021
Submit Document Feedback
TAS6584-Q1 EVM User's Guide 3
Copyright © 2021 Texas Instruments Incorporated
Run the installation program. Download the PPC3 User Manual (SLOU408) for further instructions. The following
window is displayed when first running PPC3.
Click on the Sign in button to see the TAS6584-Q1 application or plug-in. All the apps shown in figure below may
not be available.
Click on TAS6584 Application box to download application. An installation window will pop-up. Click the Install
button. The TAS6584 EVM box will appear in Installed EVM Apps section. Click the TAS6584 box to start the
TAS6584 app.
TI Confidential - Maximum Restrictions
Software Overview www.ti.com
4TAS6584-Q1 EVM User's Guide SLOU527 – DECEMBER 2021
Submit Document Feedback
Copyright © 2021 Texas Instruments Incorporated
2.2 PurePath Console – TAS6584 EVM Entry Window
Launch the TAS6584 EVM app and a basic configuration window will be shown. Select the proper values for the
set up. Click on the Configure IO button when selections are complete. The next window to be show is the IO
Window.
2.3 Start-Up IO Configuration Window
This window allows all the input and output setting for the device. I2S and TDM can be selected as well as
the Normal digital audio path and the Low Latency paths. The speaker connections and GPIO settings can be
selected.
TI Confidential - Maximum Restrictions
www.ti.com Software Overview
SLOU527 – DECEMBER 2021
Submit Document Feedback
TAS6584-Q1 EVM User's Guide 5
Copyright © 2021 Texas Instruments Incorporated
Click on the Connect button in the lower left hand corner to connect to the EVM to show the following window.
2.4 Device Monitor and Control Window
The TAS6584 Device and Control Window provides the operational register controls after the device is set up.
Click on the Device Monitor & Control box in the Home Window and the following window is displayed.
This window has 6 major sections: Global Control Section, Channel Control boxes, Miscellaneous Control box,
Fault/Warnings box, AC Load Diagnostics box, and DC Load Diagnostics box.
TI Confidential - Maximum Restrictions
Software Overview www.ti.com
6TAS6584-Q1 EVM User's Guide SLOU527 – DECEMBER 2021
Submit Document Feedback
Copyright © 2021 Texas Instruments Incorporated
2.5 Audio Processing Window
Click on the Audio Processing Options box in the Home Window and the following window is displayed.
Each box has a defined process. Click on the on/off slider to turn a process. Each box can be opened to modify
the process. The Clip Detect box is modified at the Audio Processing Window level.
2.6 IO Configuration Window
Click on the IO Configuration box in the Home Window and the following window is displayed.
Although this window is configured at the start up of the GUI, the values can be updated after the initial
configuration process. This window allows all the input and output setting for the device. I2S and TDM can be
selected as well as the Normal digital audio path and the Low Latency paths. The speaker connections and
GPIO settings can be selected.
TI Confidential - Maximum Restrictions
www.ti.com Software Overview
SLOU527 – DECEMBER 2021
Submit Document Feedback
TAS6584-Q1 EVM User's Guide 7
Copyright © 2021 Texas Instruments Incorporated
2.7 Real-Time Measurements Window
Click on the Real-Time Measurements box in the Home Window and the following window is displayed.
To start the real time measurement of voltage and temperature, click the Start button.
2.8 Register Map Window
Click on the Register Map box in the Home Window and the following window is displayed.
The register map can be sorted either alphabetically or numerically (register number). When a register is
selected, the hex value and the individual bit value is displayed. The name and description for each bit is shown
to the right in the Fields box. A bit will change state when double clicked. The state change is sent to the EVM at
the end of the second click.
TI Confidential - Maximum Restrictions
Software Overview www.ti.com
8TAS6584-Q1 EVM User's Guide SLOU527 – DECEMBER 2021
Submit Document Feedback
Copyright © 2021 Texas Instruments Incorporated
2.9 Direct I2C Window
Click on the direct I2Cbox in the Home Window and the following window is displayed.
The PPC3 has two ways to monitor and configure through direct I2C commands. The Direct I2C box can be
selected or the I2C button in the status bar can be selected from any window.
When this window is first open, the round button is green. Click on this button to turn on recording and it will
turn red. The recording can be saved for later use by clicking on the save icon. The I2C commands can also be
copied to the clip board by clicking the copy icon. The monitor can be cleared by clicking the trash icon.
A set of I2C commands can be loaded and executed from this window. On the top right corner, click on I/O
button to show the execution window. Write I2C commands or open an existing .cfg file then click the Execute
button in the bottom left corner. The I2C commands are sent to the device and the results of the execution are
shown in the bottom portion of the window.
TI Confidential - Maximum Restrictions
www.ti.com Software Overview
SLOU527 – DECEMBER 2021
Submit Document Feedback
TAS6584-Q1 EVM User's Guide 9
Copyright © 2021 Texas Instruments Incorporated
Table des matières
Autres manuels Texas Instruments Microcontrôleur
Texas Instruments
Texas Instruments OPT3002EVM Manuel utilisateur
Texas Instruments
Texas Instruments LP-MSPM0L1306 Manuel utilisateur
Texas Instruments
Texas Instruments TMDX654IDKEVM Manuel utilisateur
Texas Instruments
Texas Instruments MSP432 Manuel utilisateur
Texas Instruments
Texas Instruments TMS570LS12x Manuel utilisateur
Texas Instruments
Texas Instruments TUSB3210 Manuel utilisateur
Texas Instruments
Texas Instruments TMS370 Series Manuel utilisateur
Texas Instruments
Texas Instruments MSP430 series Manuel utilisateur
Texas Instruments
Texas Instruments INA-DUAL-2AMP-EVM Manuel utilisateur
Texas Instruments
Texas Instruments Chipcon CC2430 Manuel utilisateur
Texas Instruments
Texas Instruments CC2520 Manuel utilisateur
Texas Instruments
Texas Instruments CC1125 Manuel utilisateur
Texas Instruments
Texas Instruments CC2540 Manuel utilisateur
Texas Instruments
Texas Instruments MSP430F6747 Manuel utilisateur
Texas Instruments
Texas Instruments CC2652RSIP Manuel utilisateur
Texas Instruments
Texas Instruments CC3100 SimpleLink Manuel utilisateur
Texas Instruments
Texas Instruments Stellaris LM3S9B96 Manuel utilisateur
Texas Instruments
Texas Instruments Delfino TMS320F28377D controlCARD Manuel technique
Texas Instruments
Texas Instruments SimpleLink MSP432P4 Series Manuel du produit
Texas Instruments
Texas Instruments AM437x Manuel utilisateur
Manuels Microcontrôleur populaires d'autres marques
AMS
AMS AS7261 Demo Kit Manuel utilisateur
Novatek
Novatek NT6861 Manuel utilisateur
Espressif Systems
Espressif Systems ESP8266 SDK Guide de configuration
Nuvoton
Nuvoton ISD61S00 ChipCorder Mode d’emploi
STMicrolectronics
STMicrolectronics ST7 Assembler Linker Manuel utilisateur
Lantronix
Lantronix Intrinsyc Open-Q 865XR SOM Manuel utilisateur
NEC
NEC 78GK0S/K 1+ Series Instructions d'installation et d'utilisation
Mikroe
Mikroe SEMITECH N-PLC Click Instructions d'installation et d'utilisation
Intel
Intel Agilex Manuel utilisateur
Cypress
Cypress CY4607 HX2VL Manuel utilisateur
DIGITAL-LOGIC
DIGITAL-LOGIC MICROSPACE Manuel utilisateur
CYPRES
CYPRES CY14NVSRAMKIT-001 Manuel utilisateur
Espressif Systems
Espressif Systems ESP8266EX Mode d'emploi
Abov
Abov AC33M8128L Manuel utilisateur
Laird
Laird BL654PA Manuel utilisateur
Silicon Laboratories
Silicon Laboratories C8051F800 Manuel utilisateur
Energy micro
Energy micro EFM32 Giant Gecko Starter Kit Manuel utilisateur
Mikroe
Mikroe click Proximity 2 Manuel utilisateur