Texas Instruments MSP430F663x Manuel utilisateur

MSP430F663x

www.ti.com

SLAS566C –JUNE 2010–REVISED AUGUST 2012

MIXED SIGNAL MICROCONTROLLER

1FEATURES

2• Low Supply Voltage Range: 1.8 V to 3.6 V • Four 16-Bit Timer With 3, 5, or 7

Capture/Compare Registers

• Ultralow Power Consumption • Two Universal Serial Communication

– Active Mode (AM): Interfaces

All System Clocks Active:

270 µA/MHz at 8 MHz, 3.0 V, Flash Program – USCI_A0 and USCI_A1 Each Support:

Execution (Typical) – Enhanced UART Supports Auto-

– Standby Mode (LPM3): Baudrate Detection

Watchdog With Crystal, and Supply – IrDA Encoder and Decoder

Supervisor Operational, Full RAM – Synchronous SPI

Retention, Fast Wake-Up: – USCI_B0 and USCI_B1 Each Support:

1.8 µA at 2.2 V, 2.1 µA at 3.0 V (Typical) – I2CTM

– Shutdown RTC Mode (LPM3.5): – Synchronous SPI

Shutdown Mode, Active Real-Time Clock

With Crystal: • Full-Speed Universal Serial Bus (USB)

1.1 µA at 3.0 V (Typical) – Integrated USB-PHY

– Shutdown Mode (LPM4.5): – Integrated 3.3-V and 1.8-V USB Power

0.3 µA at 3.0 V (Typical) System

• Wake-Up From Standby Mode in 3 µs (Typical) – Integrated USB-PLL

• 16-Bit RISC Architecture, Extended Memory, – Eight Input and Eight Output Endpoints

up to 20-MHz System Clock • 12-Bit Analog-to-Digital (A/D) Converter With

• Flexible Power Management System Internal Shared Reference, Sample-and-Hold,

– Fully Integrated LDO With Programmable and Autoscan Feature

Regulated Core Supply Voltage • Dual 12-Bit Digital-to-Analog (D/A) Converters

– Supply Voltage Supervision, Monitoring, With Synchronization

and Brownout • Voltage Comparator

• Unified Clock System • Integrated LCD Driver With Contrast Control

– FLL Control Loop for Frequency for up to 160 Segments

Stabilization • Hardware Multiplier Supporting 32-Bit

– Low-Power Low-Frequency Internal Clock Operations

Source (VLO) • Serial Onboard Programming, No External

– Low-Frequency Trimmed Internal Reference Programming Voltage Needed

Source (REFO) • Six-Channel Internal DMA

– 32-kHz Crystals (XT1) • Real-Time Clock Module With Supply Voltage

– High-Frequency Crystals Up to 32 MHz Backup Switch

(XT2) • Family Members are Summarized in Table 1

• For Complete Module Descriptions, See the

MSP430x5xx and MSP430x6xx Family User's

Guide (SLAU208)

1Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of

Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

2All trademarks are the property of their respective owners.

Products conform to specifications per the terms of the Texas

Instruments standard warranty. Production processing does not

necessarily include testing of all parameters.

MSP430F663x

SLAS566C –JUNE 2010–REVISED AUGUST 2012

www.ti.com

DESCRIPTION

The Texas Instruments MSP430 family of ultralow-power microcontrollers consists of several devices featuring

different sets of peripherals targeted for various applications. The architecture, combined with five low-power

modes, is optimized to achieve extended battery life in portable measurement applications. The device features a

powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency.

The digitally controlled oscillator (DCO) allows wake-up from low-power modes to active mode in 3 µs (typical).

The MSP430F663x series are microcontroller configurations with a high performance 12-bit analog-to-digital

(A/D) converter, comparator, two universal serial communication interfaces (USCI), USB 2.0, hardware multiplier,

DMA, four 16-bit timers, real-time clock module with alarm capabilities, LCD driver, and up to 74 I/O pins.

Typical applications for this device include analog and digital sensor systems, digital motor control, remote

controls, thermostats, digital timers, hand-held meters, etc.

Family members available are summarized in Table 1.

Table 1. Family Members

USCI

Flash SRAM ADC12_A DAC12_A Comp_B Package

Channel A: Channel B:

Device Timer_A(2) Timer_B(3) I/O

(KB) (KB)(1) (Ch) (Ch) (Ch) Type

UART, SPI, I2C

IrDA, SPI

12 ext, 100 PZ,

MSP430F6638 256 16 + 2 5, 3, 3 7 2 2 2 12 74

4 int 113 ZQW

12 ext, 100 PZ,

MSP430F6637 192 16 + 2 5, 3, 3 7 2 2 2 12 74

4 int 113 ZQW

12 ext, 100 PZ,

MSP430F6636 128 16 + 2 5, 3, 3 7 2 2 2 12 74

4 int 113 ZQW

12 ext, 100 PZ,

MSP430F6635 256 16 + 2 5, 3, 3 7 2 2 - 12 74

4 int 113 ZQW

12 ext, 100 PZ,

MSP430F6634 192 16 + 2 5, 3, 3 7 2 2 - 12 74

4 int 113 ZQW

12 ext, 100 PZ,

MSP430F6633 128 16 + 2 5, 3, 3 7 2 2 - 12 74

4 int 113 ZQW

100 PZ,

MSP430F6632 256 16 + 2 5, 3, 3 7 2 2 - - 12 74 113 ZQW

100 PZ,

MSP430F6631 192 16 + 2 5, 3, 3 7 2 2 - - 12 74 113 ZQW

100 PZ,

MSP430F6630 128 16 + 2 5, 3, 3 7 2 2 - - 12 74 113 ZQW

(1) The additional 2 KB USB SRAM that is listed can be used as general purpose SRAM when USB is not in use.

(2) Each number in the sequence represents an instantiation of Timer_A with its associated number of capture compare registers and PWM

output generators available. For example, a number sequence of 3, 5 would represent two instantiations of Timer_A, the first

instantiation having 3 and the second instantiation having 5 capture compare registers and PWM output generators, respectively.

(3) Each number in the sequence represents an instantiation of Timer_B with its associated number of capture compare registers and PWM

output generators available. For example, a number sequence of 3, 5 would represent two instantiations of Timer_B, the first

instantiation having 3 and the second instantiation having 5 capture compare registers and PWM output generators, respectively.

MSP430F663x

www.ti.com

SLAS566C –JUNE 2010–REVISED AUGUST 2012

Table 2. Ordering Information(1)

PACKAGED DEVICES(2)

TAPLASTIC 100-PIN TQFP (PZ) PLASTIC 113-BALL BGA (ZQW)

MSP430F6638IPZ MSP430F6638IZQW

MSP430F6637IPZ MSP430F6637IZQW

MSP430F6636IPZ MSP430F6636IZQW

MSP430F6635IPZ MSP430F6635IZQW

–40°C to 85°C MSP430F6634IPZ MSP430F6634IZQW

MSP430F6633IPZ MSP430F6633IZQW

MSP430F6632IPZ MSP430F6632IZQW

MSP430F6631IPZ MSP430F6631IZQW

MSP430F6630IPZ MSP430F6630IZQW

(1) For the most current package and ordering information, see the Package Option Addendum at the end

of this document, or see the TI web site at www.ti.com.

(2) Package drawings, standard packing quantities, thermal data, symbolization, and PCB design

guidelines are available at http://www.ti.com/packaging.

Unified

Clock

System

256KB

192KB

128KB

Flash

16KB

RAM

+2KB RAM

USB Buffer

+8B Backup

RAM

MCLK

ACLK

SMCLK

I/O Ports

P1/P2

2×8 I/Os

Interrupt

Capability

1×16 I/Os

CPUXV2

and

Working

Registers

EEM

(L: 8+2)

XIN XOUT

JTAG/

SBW

Interface/

Port PJ

PA PB PC PD

DMA

6 Channel

XT2IN

XT2OUT

Power

Management

LDO

SVM/SVS

Brownout

SYS

Watchdog

P2 Port

Mapping

Controller

I/O Ports

P3/P4

2×8 I/Os

Interrupt

Capability

1×16 I/Os

I/O Ports

P5/P6

2×8 I/Os

1×16 I/Os

I/O Ports

P7/P8

1×6 I/Os

1×14 I/Os

1×8 I/Os

I/O Ports

1×8 I/Os

MPY32

TA0

Timer_A

5 CC

Registers

TA1 and

TA2

2 Timer_A

each with

3 CC

Registers

TB0

Timer_B

7 CC

Registers

CRC16

USCI0,1

Ax: UART,

IrDA, SPI

Bx: SPI, I2C

ADC12_A

200 KSPS

16 Channels

(12 ext/4 int)

Autoscan

12 Bit

DVCC DVSS AVCC AVSS

P1.x P2.x P3.x P4.x P5.x P6.x P7.x P8.x P9.x

RST/NMI

REF

Reference

1.5V, 2.0V,

2.5V

LCD_B

160

Segments

USB

Full-speed

Comp_B

PJ.x

RTC_B

Battery

Backup

System

Unified

Clock

System

MCLK

ACLK

SMCLK

I/O Ports

P1/P2

2×8 I/Os

Interrupt

Capability

1×16 I/Os

CPUXV2

and

Working

Registers

EEM

(L: 8+2)

XIN XOUT

JTAG/

SBW

Interface/

Port PJ

PA PB PC PD

DMA

6 Channel

XT2IN

XT2OUT

Power

Management

LDO

SVM/SVS

Brownout

SYS

Watchdog

P2 Port

Mapping

Controller

I/O Ports

P3/P4

2×8 I/Os

Interrupt

Capability

1×16 I/Os

I/O Ports

P5/P6

2×8 I/Os

1×16 I/Os

I/O Ports

P7/P8

1×6 I/Os

1×14 I/Os

1×8 I/Os

I/O Ports

1×8 I/Os

MPY32

TA0

Timer_A

5 CC

Registers

TA1 and

TA2

2 Timer_A

each with

3 CC

Registers

TB0

Timer_B

7 CC

Registers

RTC_B

Battery

Backup

System

CRC16

USCI0,1

Ax: UART,

IrDA, SPI

Bx: SPI, I2C

ADC12_A

200 KSPS

16 Channels

(12 ext/4 int)

Autoscan

12 Bit

DVCC DVSS AVCC AVSS

P1.x P2.x P3.x P4.x P5.x P6.x P7.x P8.x P9.x

RST/NMI

REF

Reference

1.5V, 2.0V,

2.5V

DAC12_A

12 bit

2 channels

voltage out

LCD_B

160

Segments

USB

Full-speed

Comp_B

PJ.x

16KB

RAM

+2KB RAM

USB Buffer

+8B Backup

RAM

256KB

192KB

128KB

Flash

MSP430F663x

SLAS566C –JUNE 2010–REVISED AUGUST 2012

www.ti.com

Functional Block Diagram, MSP430F6638, MSP430F6637, MSP430F6636

Functional Block Diagram, MSP430F6635, MSP430F6634, MSP430F6633

Unified

Clock

System

256KB

192KB

128KB

Flash

MCLK

ACLK

SMCLK

I/O Ports

P1/P2

2×8 I/Os

Interrupt

Capability

1×16 I/Os

CPUXV2

and

Working

Registers

EEM

(L: 8+2)

XIN XOUT

JTAG/

SBW

Interface/

Port PJ

PA PB PC PD

DMA

6 Channel

XT2IN

XT2OUT

Power

Management

LDO

SVM/SVS

Brownout

SYS

Watchdog

P2 Port

Mapping

Controller

I/O Ports

P3/P4

2×8 I/Os

Interrupt

Capability

1×16 I/Os

I/O Ports

P5/P6

2×8 I/Os

1×16 I/Os

I/O Ports

P7/P8

1×6 I/Os

1×14 I/Os

1×8 I/Os

I/O Ports

1×8 I/Os

MPY32

TA0

Timer_A

5 CC

Registers

TA1 and

TA2

2 Timer_A

each with

3 CC

Registers

TB0

Timer_B

7 CC

Registers

CRC16

USCI0,1

Ax: UART,

IrDA, SPI

Bx: SPI, I2C

DVCC DVSS AVCC AVSS

P1.x P2.x P3.x P4.x P5.x P6.x P7.x P8.x P9.x

RST/NMI

REF

Reference

1.5V, 2.0V,

2.5V

LCD_B

160

Segments

USB

Full-speed

Comp_B

PJ.x

RTC_B

Battery

Backup

System

16KB

RAM

+2KB RAM

USB Buffer

+8B Backup

RAM

MSP430F663x

www.ti.com

SLAS566C –JUNE 2010–REVISED AUGUST 2012

Functional Block Diagram, MSP430F6632, MSP430F6631, MSP430F6630

100

P6.4/CB4/A4

P6.5/CB5/A5

P6.6/CB6/A6/DAC0

P6.7/CB7/A7/DAC1

P7.4/CB8/A12

P7.5/CB9/A13

P7.6/CB10/A14/DAC0

P7.7/CB11/A15/DAC1

P5.0/VREF+/VeREF+

P5.1/VREF−/VeREF−

AVCC1

AVSS1

XIN

XOUT

DVCC1

DVSS1

VCORE

P5.2/R23

LCDCAP/R33

COM0

P5.3/COM1/S42

P9.7/S0

P9.6/S1

P9.5/S2

P9.4/S3

P9.3/S4

P9.2/S5

P9.1/S6

P9.0/S7

P8.7/S8

P8.6/UCB1SOMI/UCB1SCL/S9

P8.5/UCB1SIMO/UCB1SDA/S10

DVCC2

DVSS2

P2.0/P2MAP0

MSP430F6638

MSP430F6637

MSP430F6636

PZ PACKAGE

(TOP VIEW)

P6.3/CB3/A3

P6.2/CB2/A2

P6.1/CB1/A1

P6.0/CB0/A0

RST/NMI/SBWTDIO

PJ.3/TCK

PJ.2/TMS

PJ.1/TDI/TCLK

PJ.0/TDO

TEST/SBWTCK

P7.3/XT2OUT

P7.2/XT2IN

VBUS

VUSB

PU.1/DM

PUR

PU.0/DP

VSSU

V18

AVSS3

P1.3/TA0.2/S36

P1.4/TA0.3/S35

AVSS2

P5.6/ADC12CLK/DMAE0

P5.4/COM2/S41

P5.5/COM3/S40

P1.0/TA0CLK/ACLK/S39

P3.0/TA1CLK/CBOUT/S31

P3.1/TA1.0/S30

P3.2/TA1.1/S29

P1.6/TA0.1/S33

P1.7/TA0.2/S32

P1.1/TA0.0/S38

P1.2/TA0.1/S37

P1.5/TA0.4/S34

P3.3/TA1.2/S28

P3.4/TA2CLK/SMCLK/S27

P3.5/TA2.0/S26

P3.6/TA2.1/S25

P3.7/TA2.2/S24

P4.0/TB0.0/S23

P4.2/TB0.2/S21

P4.1/TB0.1/S22

P4.4/TB0.4/S19

P4.3/TB0.3/S20

P4.6/TB0.6/S17

P4.5/TB0.5/S18

P8.0/TB0CLK/S15

P4.7/TB0OUTH/SVMOUT/S16

P8.4 /S11/UCB1CLK/UCA1STE

VBAK

P2.1/P2MAP1

P2.2/P2MAP2

P2.3/P2MAP3

P2.4/P2MAP4

P2.5/P2MAP5

P2.6/P2MAP6/R03

P2.7/P2MAP7/LCDREF/R13

DVCC3

DVSS3

VBAT

P5.7/RTCCLK

P8.1/UCB1STE/UCA1CLK/S14

P8.2/UCA1TXD/UCA1SIMO/S13

P8.3/UCA1RXD/UCA1SOMI/S12

MSP430F663x

SLAS566C –JUNE 2010–REVISED AUGUST 2012

www.ti.com

Pin Designation, MSP430F6638IPZ, MSP430F6637IPZ, MSP430F6636IPZ

CAUTION: LCDCAP/R33 must be connected to DVSS if not used.

100

P6.4/CB4/A4

P6.5/CB5/A5

P6.6/CB6/A6

P6.7/CB7/A7

P7.4/CB8/A12

P7.5/CB9/A13

P7.6/CB10/A14

P7.7/CB11/A15

P5.0/VREF+/VeREF+

P5.1/VREF−/VeREF−

AVCC1

AVSS1

XIN

XOUT

DVCC1

DVSS1

VCORE

P5.2/R23

LCDCAP/R33

COM0

P5.3/COM1/S42

P9.7/S0

P9.6/S1

P9.5/S2

P9.4/S3

P9.3/S4

P9.2/S5

P9.1/S6

P9.0/S7

P8.7/S8

P8.6/UCB1SOMI/UCB1SCL/S9

P8.5/UCB1SIMO/UCB1SDA/S10

DVCC2

DVSS2

P2.0/P2MAP0

MSP430F6635

MSP430F6634

MSP430F6633

PZ PACKAGE

(TOP VIEW)

P6.3/CB3/A3

P6.2/CB2/A2

P6.1/CB1/A1

P6.0/CB0/A0

RST/NMI/SBWTDIO

PJ.3/TCK

PJ.2/TMS

PJ.1/TDI/TCLK

PJ.0/TDO

TEST/SBWTCK

P7.3/XT2OUT

P7.2/XT2IN

VBUS

VUSB

PU.1/DM

PUR

PU.0/DP

VSSU

V18

AVSS3

P1.3/TA0.2/S36

P1.4/TA0.3/S35

AVSS2

P5.6/ADC12CLK/DMAE0

P5.4/COM2/S41

P5.5/COM3/S40

P1.0/TA0CLK/ACLK/S39

P3.0/TA1CLK/CBOUT/S31

P3.1/TA1.0/S30

P3.2/TA1.1/S29

P1.6/TA0.1/S33

P1.7/TA0.2/S32

P1.1/TA0.0/S38

P1.2/TA0.1/S37

P1.5/TA0.4/S34

P3.3/TA1.2/S28

P3.4/TA2CLK/SMCLK/S27

P3.5/TA2.0/S26

P3.6/TA2.1/S25

P3.7/TA2.2/S24

P4.0/TB0.0/S23

P4.2/TB0.2/S21

P4.1/TB0.1/S22

P4.4/TB0.4/S19

P4.3/TB0.3/S20

P4.6/TB0.6/S17

P4.5/TB0.5/S18

P8.0/TB0CLK/S15

P4.7/TB0OUTH/SVMOUT/S16

P8.4 /S11/UCB1CLK/UCA1STE

VBAK

P2.1/P2MAP1

P2.2/P2MAP2

P2.3/P2MAP3

P2.4/P2MAP4

P2.5/P2MAP5

P2.6/P2MAP6/R03

P2.7/P2MAP7/LCDREF/R13

DVCC3

DVSS3

VBAT

P5.7/RTCCLK

P8.1/UCB1STE/UCA1CLK/S14

P8.2/UCA1TXD/UCA1SIMO/S13

P8.3/UCA1RXD/UCA1SOMI/S12

MSP430F663x

www.ti.com

SLAS566C –JUNE 2010–REVISED AUGUST 2012

Pin Designation, MSP430F6635IPZ, MSP430F6634IPZ, MSP430F6633IPZ

CAUTION: LCDCAP/R33 must be connected to DVSS if not used.

100

P6.4/CB4

P6.5/CB5

P6.6/CB6

P6.7/CB7

P7.4/CB8

P7.5/CB9

P7.6/CB10

P7.7/CB11

P5.0/VREF+/VeREF+

P5.1/VREF−/VeREF−

AVCC1

AVSS1

XIN

XOUT

DVCC1

DVSS1

VCORE

P5.2/R23

LCDCAP/R33

COM0

P5.3/COM1/S42

P9.7/S0

P9.6/S1

P9.5/S2

P9.4/S3

P9.3/S4

P9.2/S5

P9.1/S6

P9.0/S7

P8.7/S8

P8.6/UCB1SOMI/UCB1SCL/S9

P8.5/UCB1SIMO/UCB1SDA/S10

DVCC2

DVSS2

P2.0/P2MAP0

MSP430F6632

MSP430F6631

MSP430F6630

PZ PACKAGE

(TOP VIEW)

P6.3/CB3

P6.2/CB2

P6.1/CB1

P6.0/CB0

RST/NMI/SBWTDIO

PJ.3/TCK

PJ.2/TMS

PJ.1/TDI/TCLK

PJ.0/TDO

TEST/SBWTCK

P7.3/XT2OUT

P7.2/XT2IN

VBUS

VUSB

PU.1/DM

PUR

PU.0/DP

VSSU

V18

AVSS3

P1.3/TA0.2/S36

P1.4/TA0.3/S35

AVSS2

P5.6/DMAE0

P5.4/COM2/S41

P5.5/COM3/S40

P1.0/TA0CLK/ACLK/S39

P3.0/TA1CLK/CBOUT/S31

P3.1/TA1.0/S30

P3.2/TA1.1/S29

P1.6/TA0.1/S33

P1.7/TA0.2/S32

P1.1/TA0.0/S38

P1.2/TA0.1/S37

P1.5/TA0.4/S34

P3.3/TA1.2/S28

P3.4/TA2CLK/SMCLK/S27

P3.5/TA2.0/S26

P3.6/TA2.1/S25

P3.7/TA2.2/S24

P4.0/TB0.0/S23

P4.2/TB0.2/S21

P4.1/TB0.1/S22

P4.4/TB0.4/S19

P4.3/TB0.3/S20

P4.6/TB0.6/S17

P4.5/TB0.5/S18

P8.0/TB0CLK/S15

P4.7/TB0OUTH/SVMOUT/S16

P8.4 /S11/UCB1CLK/UCA1STE

VBAK

P2.1/P2MAP1

P2.2/P2MAP2

P2.3/P2MAP3

P2.4/P2MAP4

P2.5/P2MAP5

P2.6/P2MAP6/R03

P2.7/P2MAP7/LCDREF/R13

DVCC3

DVSS3

VBAT

P5.7/RTCCLK

P8.1/UCB1STE/UCA1CLK/S14

P8.2/UCA1TXD/UCA1SIMO/S13

P8.3/UCA1RXD/UCA1SOMI/S12

MSP430F663x

SLAS566C –JUNE 2010–REVISED AUGUST 2012

www.ti.com

Pin Designation, MSP430F6632IPZ, MSP430F6631IPZ, MSP430F6630IPZ

CAUTION: LCDCAP/R33 must be connected to DVSS if not used.

A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12

B1 B2 B3 B4 B5 B6 B7 B8 B9 B10 B11 B12

C1 C2 C3 C11 C12

D1 D2 D4 D5 D6 D7 D8 D9 D11 D12

E1 E2 E4 E5 E6 E7 E8 E9 E11 E12

F1 F2 F4 F5 F8 F9 F11 F12

G1 G2 G4 G5 G8 G9 G11 G12

J1 J2 J4 J5 J6 J7 J8 J9 J11 J12

H1 H2 H4 H5 H6 H7 H8 H9 H11 H12

K1 K2 K11 K12

L1 L2 L3 L4 L5 L6 L7 L8 L9 L10 L11 L12

M1 M2 M3 M5 M6 M7 M8 M9 M10 M11 M12

ZQW PACKAGE

(TOP VIEW)

MSP430F663x

www.ti.com

SLAS566C –JUNE 2010–REVISED AUGUST 2012

Pin Designation, MSP430F6638IZQW, MSP430F6637IZQW, MSP430F6636IZQW,

MSP430F6635IZQW, MSP430F6634IZQW, MSP430F6633IZQW, MSP430F6632IZQW,

MSP430F6631IZQW, MSP430F6630IZQW

NOTE: For terminal assignments, see Table 3

MSP430F663x

SLAS566C –JUNE 2010–REVISED AUGUST 2012

www.ti.com

Table 3. Terminal Functions

TERMINAL

NO. I/O(1) DESCRIPTION

NAME PZ ZQW

General-purpose digital I/O

P6.4/CB4/A4 1 A1 I/O Comparator_B input CB4

Analog input A4 – ADC(not available on F6632, F6631, F6630 devices)

General-purpose digital I/O

P6.5/CB5/A5 2 B2 I/O Comparator_B input CB5

Analog input A5 – ADC(not available on F6632, F6631, F6630 devices)

General-purpose digital I/O

Comparator_B input CB6

P6.6/CB6/A6/DAC0 3 B1 I/O Analog input A6 – ADC (not available on F6632, F6631, F6630 devices)

DAC12.0 output (not available on F6635, F6634, F6633, F6632, F6631, F6630

devices)

General-purpose digital I/O

Comparator_B input CB7

P6.7/CB7/A7/DAC1 4 C2 I/O Analog input A7 – ADC (not available on F6632, F6631, F6630 devices)

DAC12.1 output (not available on F6635, F6634, F6633, F6632, F6631, F6630

devices)

General-purpose digital I/O

P7.4/CB8/A12 5 C1 I/O Comparator_B input CB8

Analog input A12 –ADC (not available on F6632, F6631, F6630 devices)

General-purpose digital I/O

P7.5/CB9/A13 6 C3 I/O Comparator_B input CB9

Analog input A13 – ADC (not available on F6632, F6631, F6630 devices)

General-purpose digital I/O

Comparator_B input CB10

P7.6/CB10/A14/DAC0 7 D2 I/O Analog input A14 – ADC (not available on F6632, F6631, F6630 devices)

DAC12.0 output (not available on F6635, F6634, F6633, F6632, F6631, F6630

devices)

General-purpose digital I/O

Comparator_B input CB11

P7.7/CB11/A15/DAC1 8 D1 I/O Analog input A15 – ADC (not available on F6632, F6631, F6630 devices)

DAC12.1 output (not available on F6635, F6634, F6633, F6632, F6631, F6630

devices)

General-purpose digital I/O

P5.0/VREF+/VeREF+ 9 D4 I/O Output of reference voltage to the ADC

Input for an external reference voltage to the ADC

General-purpose digital I/O

P5.1/VREF-/VeREF- 10 E4 I/O Negative terminal for the ADC's reference voltage for both sources, the internal

reference voltage, or an external applied reference voltage

E1,

AVCC1 11 Analog power supply

AVSS1 12 F2 Analog ground supply

XIN 13 F1 I Input terminal for crystal oscillator XT1

XOUT 14 G1 O Output terminal of crystal oscillator XT1

AVSS2 15 G2 Analog ground supply

(1) I = input, O = output, N/A = not available on this package offering

Autres manuels pour MSP430F663x

Table des matières

Autres manuels Texas Instruments Microcontrôleur

Texas Instruments

Texas Instruments AM5729 Manuel utilisateur

Texas Instruments

Texas Instruments SimpleLink CC2620 Manuel du produit

Texas Instruments

Texas Instruments AFE722 Series Manuel utilisateur

Texas Instruments

Texas Instruments LaunchPad MSP430FR2476 Manuel utilisateur

Texas Instruments

Texas Instruments EK-TM4C123GXL-BOOSTXL-SENSHUB Manuel utilisateur

Texas Instruments

Texas Instruments MSP430F67781 Manuel utilisateur

Texas Instruments

Texas Instruments MSP430F67451 Manuel utilisateur

Texas Instruments

Texas Instruments MSP430G2744DA Manuel utilisateur

Texas Instruments

Texas Instruments SimpleLink CC3200 Wi-Fi Manuel utilisateur

Texas Instruments

Texas Instruments MSP430F6747 Manuel utilisateur

Texas Instruments

Texas Instruments TPS3808G01-Q1EVM Manuel utilisateur

Texas Instruments

Texas Instruments TAS5805M Manuel utilisateur

Texas Instruments

Texas Instruments TDP0604 Manuel utilisateur

Texas Instruments

Texas Instruments MSP-WDS Metawatch Series Manuel utilisateur

Texas Instruments

Texas Instruments TUSB3210 Manuel utilisateur

Texas Instruments

Texas Instruments LP-EM-CC1354P10-1 Manuel

Texas Instruments

Texas Instruments 430BOOST-TMP006 BoosterPack Manuel utilisateur

Texas Instruments

Texas Instruments MSP430F67761 Manuel utilisateur

Texas Instruments

Texas Instruments MSP430F533x Manuel utilisateur

Texas Instruments

Texas Instruments CC2533EMK Manuel utilisateur

Texas Instruments

Texas Instruments MSP430F6768 Manuel utilisateur

Texas Instruments

Texas Instruments Errata MSP430FG6426 Manuel utilisateur

Texas Instruments

Texas Instruments DRV8251/AEVM Manuel utilisateur

Texas Instruments

Texas Instruments TMDX654IDKEVM Manuel utilisateur

Manuels Microcontrôleur populaires d'autres marques

AMS

AMS AS7261 Demo Kit Manuel utilisateur

Novatek

Novatek NT6861 Manuel utilisateur

Espressif Systems

Espressif Systems ESP8266 SDK Guide de configuration

Nuvoton

Nuvoton ISD61S00 ChipCorder Mode d’emploi

STMicrolectronics

STMicrolectronics ST7 Assembler Linker Manuel utilisateur

Lantronix

Lantronix Intrinsyc Open-Q 865XR SOM Manuel utilisateur

NEC

NEC 78GK0S/K 1+ Series Instructions d'installation et d'utilisation

Mikroe

Mikroe SEMITECH N-PLC Click Instructions d'installation et d'utilisation

Intel

Intel Agilex Manuel utilisateur

Cypress

Cypress CY4607 HX2VL Manuel utilisateur

DIGITAL-LOGIC

DIGITAL-LOGIC MICROSPACE Manuel utilisateur

CYPRES

CYPRES CY14NVSRAMKIT-001 Manuel utilisateur

Espressif Systems

Espressif Systems ESP8266EX Mode d'emploi

Abov

Abov AC33M8128L Manuel utilisateur

Laird

Laird BL654PA Manuel utilisateur

Silicon Laboratories

Silicon Laboratories C8051F800 Manuel utilisateur

Energy micro

Energy micro EFM32 Giant Gecko Starter Kit Manuel utilisateur

Mikroe

Mikroe click Proximity 2 Manuel utilisateur