StarTech.com P2DD46A22-KVM-SWITCH Manuel utilisateur
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
October 4, 2023 9:58 AM
2-Port Dual Monitor KVM Switch - DisplayPort - 4K 60Hz - Serial Control
Product IDs
P2DD46A22-KVM-SWITCH
Product Information
For the latest software, manuals, product information, technical specications, and declarations of conformance, please visit:
www.StarTech.com/P2DD46A22-KVM-SWITCH
Hotkey Commands
Hotkey commands are keystroke sequences that initiate computer/device functions and can be used to initiate KVM Switch
functions. A hotkey command sequence must be initiated by the HK_LCode (HotKey Leading Code), followed by 1-2 additional
keystrokes. Successful hotkey command inputs result in a high-pitched beep. Unsuccessful hotkey command inputs result in a
low-pitched beep.
Notes:
- All keystroke combinations must be entered in rapid succession.
- Press and release the indicated keys, unless otherwise specied.
HK_LCode
Option 1.1
• Scr Lck + Scr Lck
Option 1.2
To change the HK_LCode:
• HK_LCode + H + CapsLk, NumLk, Left Ctrl or Right Ctrl
• Alternatively, press and hold the front Host Selection Button for PC2, until 2 beeps are emitted, then press the desired leading
hotkey of CapsLk, NumLk, Left Ctrl or Right Ctrl
Hotkey Command Chart
Hotkey Command Function
HK_LCode + Space • Bring up the On Screen Display (OSD) Menu.
HK_LCode + 1 ~ 2
or
HK_LCode + F1 ~ F2
• Select PC 1 or PC 2.
HK_LCode + W
• Disable the binding between PC (USB/Video) and Audio
when switching between PC 1 or PC 2.
• Allows switching of PC Ports USB and Video functions,
while Audio does not switch.
HK_LCode + Q
• Enable the binding of PC (USB/Video) and Audio
switching. (Enabled by default)
• Audio will switch with the PC Ports USB and Video
functions.
HK_LCode + F5 ~ F6
• Audio Unbound: Selects only the audio and mic source
between PC 1 or PC 2, does not switch USB and Video.
• Audio Bound: Select PC 1 or PC 2 and their respective
USB/Video/Audio Ports.
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
October 4, 2023 9:58 AM
HK_LCode + V
• Disable the binding between PC (USB/Video) and Serial
when switching between PC 1 or PC 2.
• Allows switching of PC Ports USB and Video functions,
while Serial does not switch.
HK_LCode + C
• Enable the binding of PC (USB/Video) and Serial
switching. (Enabled by default)
• Serial will switch with the PC Ports USB and Video
functions.
HK_LCode + F9~F10
• Serial Unbound: Selects only the Serial source between
PC 1 or PC 2, does not switch USB and Video.
• Serial Bound: Select PC 1 or PC 2 and their respective
USB/Video/Serial Ports.
HK_LCode + Up Arrow
Key
or
HK_LCode + Down
Arrow Key
• Select the next/previous PC Port.
• If Audio is unbound, the audio will not switch
• If Serial is unbound, the serial ports will not switch
HK_LCode + B • Enable or Disable the Beep that indicates HotKey Com-
mand Inputs. (Enabled by default)
HK_LCode + H + 0~9
• Start Autoscan and set time delay.
• “x” = 1 - 10sec, 2 - 20sec, 3 - 30sec, 4 - 40sec, 5
- 50sec, 6 - 60sec, 7 - 70sec, 8 - 80sec, 9 - 90sec, 0 -
100sec
• Press any key to stop Autoscan
HK_LCode + R • Reset all Hotkey Commands to factory defaults
Serial Commands
The following Serial Commands are intended to be used with the KVM Serial Connection Port, allowing control over the function
of the KVM Switch. The Host Device that controls the KVM Switch requires the following parameters:
Baudrate: 115200bps
Parity: None
Data Bits: 8
Stop Bits: 1
Serial Command Function
sw 1~2 • Switch the active PC Port
audio 1~2 • Switch the active Audio Port
com 1~2 • Switch the active RS232 Port
bind 2~3
• Bind selected peripheral with the active PC Port
• 2 = Audio
• 3 = RS232
unbind 2~3
• Unbind selected peripheral from the active PC Port
• 2 = Audio
• 3 = RS232
hotkey 0~4
• Change the hotkey prex
• 0 = ScrLk
• 1 = CapsLk
• 2 = NumLk
• 3 = Left Ctrl
• 4 = Right Ctrl
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
October 4, 2023 9:58 AM
osdtime 1~7
• Set the OSD displayed time
• 1 = 10
• 2 = 20
• 3 = 30
• 4 = 40
• 5 = 50
• 6 = 60
• 7 = Manual
titletime 0~7
• Set the title bar timeout duration
• 0 = o
• 1 = 5
• 2 = 10
• 3 = 15
• 4 = 20
• 5 = 25
• 6 = 30
• 7 = Always On
setname 1~2 [name] • Set the PC Port name
• Max of 16 characters
version • Show the Firmware version
help [command] • Show the format of the command
list • List all available commands
default • Set the KVM to factory defaults
Onscreen Display Menu
Bring up the Onscreen Display (OSD) by using the keyboard shortcut HK_LCode + Space. The OSD provides the ability to modify
settings, switch host ports, and perform other actions.
OSD Main Menu
The Main Menu of the OSD displays the names of the connected Computers, along with the status of Audio and RS232 (COM)
binding. Settings and device information are accessible from this menu.
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
October 4, 2023 9:58 AM
OSD Settings Menu
The OSD Settings enable the modication of the primary hotkey, OSD timeout, titlebar timeout, or restore the KVM Switch to its
factory default settings.
Example Screenshot
Autres manuels StarTech.com Changer
StarTech.com
StarTech.com SV431DPU3A2 Manuel utilisateur
StarTech.com
StarTech.com ST124WGB Manuel utilisateur
StarTech.com
StarTech.com MSTCDP123DP Manuel utilisateur
StarTech.com
StarTech.com HB30C3A1CST Manuel utilisateur
StarTech.com
StarTech.com SV431DD2DU3A Manuel utilisateur
StarTech.com
StarTech.com MSTMDP122DP Manuel utilisateur
StarTech.com
StarTech.com D86A2-2-PORT-8K-KVM Manuel utilisateur
StarTech.com
StarTech.com MSTDP122DP Manuel utilisateur
StarTech.com
StarTech.com HB30C5A2CST Manuel utilisateur
StarTech.com
StarTech.com VS221DP Manuel utilisateur
StarTech.com
StarTech.com VS221HDQ Manuel utilisateur
StarTech.com
StarTech.com SV431USBDDM Manuel utilisateur
StarTech.com
StarTech.com DS52000 Manuel utilisateur
StarTech.com
StarTech.com SV211HDUA4K Manuel utilisateur
StarTech.com
StarTech.com SV431HDU3A2 Manuel utilisateur
StarTech.com
StarTech.com STARVIEW SV1631DUSB Manuel utilisateur
StarTech.com
StarTech.com SV431HU34K6 Manuel utilisateur
StarTech.com
StarTech.com SV831DVIU Manuel utilisateur
StarTech.com
StarTech.com VS123HD Manuel utilisateur
StarTech.com
StarTech.com PDU08C13GB Manuel utilisateur
