StarTech.com SAT1810U2 Manuel utilisateur
SATA Hard Drive Enclosure
1.8” USB 2.0 to Micro SATA
External Hard Drive Enclosure
SAT1810U2
Instruction Manual
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.•
Increase the separation between the equipment and receiver.•
Connect the equipment into an outlet on a circuit different from that to which the•
receiver
is connected.
Consult the dealer or an experienced radio/TV technician for help.•
Use of Trademarks, Registered Trademarks, and other Protected Names and
Symbols
This manual may make reference to trademarks, registered trademarks, and other
protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes
only and do not represent an endorsement of a product or service by StarTech.
com, or an endorsement of the product(s) to which this manual applies by the
third-party company in question. Regardless of any direct acknowledgement
elsewhere in the body of this document, StarTech.com hereby acknowledges that
all trademarks, registered trademarks, service marks, and other protected names
and/or symbols contained in this manual and related documents are the property
of their respective holders.
i
Table of Contents
Introduction ............................................................... 1
Packaging Contents.............................................................. 1
System Requirements .......................................................... 1
Installation................................................................. 2
Hardware Installation............................................................ 2
Driver Installation.................................................................. 3
Using the Enclosure ................................................. 4
Specifications............................................................ 6
Technical Support..................................................... 7
Warranty Information ................................................ 7
1
Introduction
The StarTech.com 1.8” USB 2.0 to Micro SATA external hard drive
enclosure allows you to turn a 1.8” Micro SATA hard drive or SSD into a
portable external storage solution. Connected through USB 2.0, this sturdy
yet lightweight enclosure offers a cost-effective way to create an ultra
portable storage solution that is powered by USB, eliminating the need for
additional power adapters.
Packaging Contents
1 x SAT1810U2 enclosure•
1 x USB cable•
2 x Foam Pads for 5mm drives•
1 x Carrying Pouch•
1 x Instruction Manual•
System Requirements
USB enabled computer system with available USB port•
USB enabled operating system•
1.8” Micro SATA hard drive/SSD (5mm or 8mm height)•
2
Installation
WARNING: Hard drives require careful handling, especially when being
transported. If you are not careful with your hard disk, lost data may result.
Always handle your hard drive and storage device with caution.
Hardware Installation
Remove the small screw from the rear panel of the enclosure.1.
Open the top panel of the enclosure by pulling the plastic pull tab.2.
Pull Tab
Screw Driver
(not included)
Rear Panel screw
Power/Activity LED
USB mini-B
connector
3
If using a 5mm drive, place the two foam pads on the bottom of the drive3.
tray. The foam pads are not required if using an 8mm drive.
Place the drive into the tray and then slide the drive onto the connector.4.
Replace the top cover. The plastic pull tab may be removed, if desired.5.
Replace the screw in the rear panel.6.
Connect the USB cable from the enclosure to the computer system.7.
Driver Installation
No driver installation is required for any operating system that supports
USB, as this enclosure uses native drivers that are already installed.
Pull Tab
Foam Pads
4
Using the Enclosure
Windows 2000/XP/Server 2003Vista/Server 2008 R2/7
If you are using a brand new hard drive that does not contain any data,
then you will first need to prepare the hard drive for use. From the main
desktop, right-click on “My Computer” (“Computer” in Vista/7), then
select Manage. In the new Computer Management window, select Disk
Management from the left window panel.
Locate the Disk that says it is “Unallocated” (check hard drive capacity to
confirm it’s the correct hard drive) and then right-click in the section that
says “Unallocated” and select “New Partition”.
5
The New Partition Wizard will appear. Follow the instructions in the wizard
to complete setting up the drive. Once complete, the Disk should show up
as “Healthy” with a drive letter assigned (i.e. E:). This drive letter should
now appear within My Computer.
If you are installing a hard drive that already has data on it, then after
plugging it in, the drive should automatically show up with a drive letter
assigned within My Computer.
6
Specications
Bus Interface USB 2.0
Chipset ID Sunplus SPIF301
Connectors 1 x USB mini-B
LEDs 1 x Power/Activity
Maximum Data Transfer Rate USB 2.0: 480Mbps
Hard Drive Compatibility 1.8” Micro SATA HDD/SSD, with
height up to 8mm
Operating Temperature 0°C ~ 60°C (32°F ~ 140°F)
Storage Temperature -20°C ~ 85°C (-4°F ~ 185°F)
Humidity 5 ~ 90% RH
Dimensions (LxWxH) 96.0mm x 60.0mm x 12.0mm
Weight 30g
7
Technical Support
StarTech.com’s lifetime technical support is an integral part of our
commitment to provide industry-leading solutions. If you ever need
help with your product, visit www.startech.com/support and access
our comprehensive selection of online tools, documentation, and
downloads.
Warranty Information
This product is backed by a one year warranty.
In addition, StarTech.com warrants its products against defects in
materials and workmanship for the periods noted, following the initial
date of purchase. During this period, the products may be returned
for repair, or replacement with equivalent products at our discretion.
The warranty covers parts and labor costs only. StarTech.com does
not warrant its products from defects or damages arising from misuse,
abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.
com USA LLP (or their officers, directors, employees or agents) for
any damages (whether direct or indirect, special, punitive, incidental,
consequential, or otherwise), loss of profits, loss of business, or any
pecuniary loss, arising out of or related to the use of the product exceed
the actual price paid for the product. Some states do not allow the
exclusion or limitation of incidental or consequential damages. If such
laws apply, the limitations or exclusions contained in this statement
may not apply to you.
Autres manuels pour SAT1810U2
1
Table des matières
Autres manuels StarTech.com Enceinte
StarTech.com
StarTech.com RK1232WALHM Manuel utilisateur
StarTech.com
StarTech.com SW-3023 Manuel utilisateur
StarTech.com
StarTech.com DRW115SAT Manuel utilisateur
StarTech.com
StarTech.com S351BMU33ET Manuel utilisateur
StarTech.com
StarTech.com SATSASBAY425 Manuel utilisateur
StarTech.com
StarTech.com RK1219WALL Manuel utilisateur
StarTech.com
StarTech.com InfoSafe SAT2510BU2B Manuel utilisateur
StarTech.com
StarTech.com S252SMTB3 Manuel utilisateur
StarTech.com
StarTech.com HSB320SATBK Manuel utilisateur
StarTech.com
StarTech.com S352U2RER Manuel utilisateur
StarTech.com
StarTech.com SAT3520UERGB Manuel utilisateur
StarTech.com
StarTech.com SAT3540U2E Manuel utilisateur
StarTech.com
StarTech.com UNI3510U2 Manuel utilisateur
StarTech.com
StarTech.com S251BPU313 Manuel utilisateur
StarTech.com
StarTech.com SAT2510BU32 Manuel utilisateur
StarTech.com
StarTech.com SAT3520U3R Manuel utilisateur
StarTech.com
StarTech.com SAT2510U2E Manuel utilisateur
StarTech.com
StarTech.com SAT3510U2V Manuel utilisateur
StarTech.com
StarTech.com SAT3540U3ER Manuel utilisateur
StarTech.com
StarTech.com S3520BU33ER Manuel du système
