StarTech.com UNI251BMU33 Manuel utilisateur

Manual Revision: 09/26/2014

For the most up-to-date information, please visit: www.startech.com

DE: Bedienungsanleitung - de.startech.com

FR: Guide de l'utilisateur - fr.startech.com

ES: Guía del usuario - es.startech.com

IT: Guida per l'uso - it.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

UNI251BMU33

USB 3.0 SATA/IDE 2.5” Hard Drive Enclosure

*actual product may vary from photos

Instruction Manual

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception, which can

be determined by turning the equipment o and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) This device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may cause undesired operation.

Changes or modications not expressly approved by StarTech.com could void the user’s

authority to operate the equipment.

Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.

CAN ICES-3 (B)/NMB-3(B)

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other

protected names and/or symbols of third-party companies not related in any way to

StarTech.com. Where they occur these references are for illustrative purposes only and do not

represent an endorsement of a product or service by StarTech.com, or an endorsement of the

product(s) to which this manual applies by the third-party company in question. Regardless

of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby

acknowledges that all trademarks, registered trademarks, service marks, and other protected

names and/or symbols contained in this manual and related documents are the property of

their respective holders.

Instruction Manual

Table of Contents

Introduction............................................................................................1

Packaging Contents ................................................................................................................................. 1

System Requirements.............................................................................................................................. 1

Product Diagram ....................................................................................2

Front View .................................................................................................................................................... 2

Hardware Installation............................................................................3

How to Use ..............................................................................................7

Connecting the Hard Drive.................................................................................................................... 7

Powering the Drive Enclosure .............................................................................................................. 7

LED Indicator .............................................................................................................................................. 7

Disconnecting the Hard Drive.............................................................................................................. 7

Initializing the Hard Drive ...................................................................................................................... 8

Specications..........................................................................................9

Technical Support ..................................................................................10

Warranty Information............................................................................10

Instruction Manual

Introduction

Packaging Contents

• 1x USB 3.0 SATA/IDE 2.5” Hard Drive Enclosure

• 1x USB Y Cable

• 4x Installation screws

• 1x Screw driver

• 1x Instruction manual

System Requirements

• Computer system with available USB 3.0 (5 Gbit/s) port or USB 2.0 port (480Mbps)

• 2.5” SATA Solid State Drive (SSD) / Hard Drive (HDD) or 2.5in IDE Hard Drive (HDD)

Instruction Manual

Product Diagram

Front View

1. USB 3.0 Micro Type B port

2. Drive tray screws

Instruction Manual

Hardware Installation

WARNING:

Hard drives and storage enclosures require careful handling, especially when being

transported. If you are not careful with your hard disk, lost data may result. Always

handle your hard drive and storage device with caution. Be sure that you are properly

grounded by wearing an anti-static strap when handling computer components or

discharge yourself of any static electricity build-up by touching a large grounded metal

surface (such as the computer case) for several seconds.

1. Remove the drive screws from the front of the enclosure.

Note: Ensure the screws removed, are the screws on the side with the USB 3.0 port.

2. The front plate will easily be removed to reveal the drive tray. Gently slide the drive

tray out of the enclosure.

Instruction Manual

3. Connect your 2.5” SSD/HDD to the drive tray.

a) If connecting a SATA drive, connect the SATA connector on the drive to the

SATA drive port on the drive tray.

b) If connecting an IDE drive, connect the IDE connector on the drive to the IDE

drive port on the drive tray.

Instruction Manual

4. Secure the drive in place with the 4 provided drive screws.

5. Slide the drive tray back inside the enclosure.

Note: Ensure the USB port is pointing outward.

Instruction Manual

5. Place the front plate back on the enclosure, over the drive tray, and drive each of the

drive tray screws back into place using the included screw driver.

6. To complete installation, connect the included USB Y cable from the USB 3.0 Micro

type B port on the enclosure to any 2 available USB port on your computer system.

Instruction Manual

How to Use

Connecting the Hard Drive

Once the enclosure has been attached to a computer, and the OS has installed the

necessary software, the drive will be accessible as though it were installed within the

system.

Prior to using the drive, it will need to be formatted according to your operating

system requirements. To format your newly attached hard drive, or create partitions,

please see the Initializing the Hard Drive section.

Powering the Drive Enclosure

The hard drive enclosure requires no external power supply, as it is capable of receiving

enough power from the two USB Bus connectors on the USB Y cable.

LED Indicator

The hard drive enclosure oers an LED indicator, to enable you to monitor drive

activity. When the enclosure is powered, the LED will illuminate. While the hard drive

is being accessed, the LED will blink. Do not remove the enclosure from the host

computer while the LED is ashing, as it could damage the drive or the enclosure,

resulting in data loss.

Disconnecting the Hard Drive

Windows

1. Select the “Safely remove Hardware and Eject Media” icon, located in the task bar.

2. Select the storage device from the list that appears.

3. Wait for the message indicating that it is now safe to remove the device.

Note: Removing the connected drive prior to receiving notication that it is safe to

do so, could result in losing or corrupting data stored on the drive. Once the Safe

to Remove Hardware message appears, please disconnect the enclosure from the

computer by removing the USB connection.

Mac OS X

To safely disconnect the attached drive from the host computer, close any windows

listing the contents of the removable drive. Once all windows are closed, click on the

USB storage icon on the desktop, and drag it to the Trash Can icon on the desktop.

Allow 5 seconds before physically removing the enclosure/drive from the computer.

Table des matières

Autres manuels StarTech.com Enceinte

StarTech.com

StarTech.com S2510BU3PW Manuel utilisateur

StarTech.com

StarTech.com InfoSafe IDECASE35U2 Manuel utilisateur

StarTech.com

StarTech.com INFOSAFE SAT3540ER Manuel utilisateur

StarTech.com

StarTech.com M2-USB-C-NVME-SATA Manuel utilisateur

StarTech.com

StarTech.com 8STDRW150SATBK Manuel utilisateur

StarTech.com

StarTech.com SAT2MSAT25 Manuel utilisateur

StarTech.com

StarTech.com ESATCASE2 Manuel utilisateur

StarTech.com

StarTech.com S2510BMU33CB Manuel du système

StarTech.com

StarTech.com SECTBLTPOS2 Manuel utilisateur

StarTech.com

StarTech.com SAT2510BU3 Manuel utilisateur

StarTech.com

StarTech.com S351BMU33ETG Manuel utilisateur

StarTech.com

StarTech.com RK2536BKF Manuel utilisateur

StarTech.com

StarTech.com SAT2510B12U3 Manuel utilisateur

StarTech.com

StarTech.com S2510U2WF Manuel utilisateur

StarTech.com

StarTech.com S355BU33ERM Manuel utilisateur

StarTech.com

StarTech.com SAT3520U2R Manuel utilisateur

StarTech.com

StarTech.com INFOSAFE SAT2510BU2 Manuel utilisateur

StarTech.com

StarTech.com S251BU31C3CB Manuel utilisateur

StarTech.com

StarTech.com DRW115SAT Manuel utilisateur

StarTech.com

StarTech.com RK2620WALHM Manuel utilisateur

StarTech.com

StarTech.com RK1019SIDEM Manuel utilisateur

StarTech.com

StarTech.com SAT2510BU32 Manuel utilisateur

StarTech.com

StarTech.com SAT35401U Manuel du système

StarTech.com

StarTech.com SATSAS225ODD Manuel utilisateur

Manuels Enceinte populaires d'autres marques

SilentiumPC

SilentiumPC Armis AR5 Manuel

Pulsar

Pulsar 17/TRP80/DSPR Manuel utilisateur

Thermaltake

Thermaltake V150 TG Manuel utilisateur

MSI

MSI MPG SEKIRA 500X Manuel utilisateur

Antec

Antec Dark fleet DF-10 Manuel utilisateur

Nexans

Nexans WTC05 Manuel utilisateur

Peavey

Peavey DS 1502 Manuel utilisateur

D-Link

D-Link ShareCenter Pro DNS-1550-04 Manuel utilisateur

Rosewill

Rosewill RX82-U(JBOD) Manuel utilisateur

QNAP

QNAP SAS JBOD CLI 1.0 Manuel utilisateur

GAMDIAS

GAMDIAS Talos P1 Manuel utilisateur

Auvs

Auvs KR615 Manuel utilisateur

Digitus

Digitus DA-71114 Manuel utilisateur

CommScope

CommScope FDH 3000 Manuel utilisateur

FS FHD-FWME4 Manuel utilisateur

JBL

JBL CS1215T Manuel utilisateur

Pulsar

Pulsar ARAD-S4 Manuel utilisateur

Pulsar

Pulsar AWO454 Manuel utilisateur