StarTech.com S252BU313R Manuel utilisateur
i
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Compliance Statements
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment o and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
• Reorientorrelocatethereceivingantenna
• Increasetheseparationbetweentheequipmentandreceiver
• Connecttheequipmentintoanoutletonacircuitdierentfromthatto
whichthereceiverisconnected
• Consultthedealeroranexperiencedradio/TVtechnicianforhelp
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du
Canada.
CAN ICES-3 (B)/NMB-3(B)
ii
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Use of Trademarks, Registered Trademarks, and other
Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and
other protected names and/or symbols of third-party companies not related in
any way to StarTech.com. Where they occur these references are for illustrative
purposes only and do not represent an endorsement of a product or service
by StarTech.com, or an endorsement of the product(s) to which this manual
applies by the third-party company in question. Regardless of any direct
acknowledgement elsewhere in the body of this document, StarTech.com
hereby acknowledges that all trademarks, registered trademarks, service marks,
and other protected names and/or symbols contained in this manual and
related documents are the property of their respective holders.
iii
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Safety Statements
Safety Measures
• Wiringterminationsshouldnotbemadewiththeproductand/or
electriclinesunderpower.
• Cables(includingpowerandchargingcables)shouldbeplacedand
routedtoavoidcreatingelectric,trippingorsafetyhazards.
Mesures de sécurité
• Lesterminaisonsdecâblâgenedoiventpasêtreeectuéeslorsquele
produitet/oulescâblesélectriquessontsoustension.
• Lescâbles(ycomprislescâblesd’alimentationetdechargement)
doiventêtreplacésetacheminésdefaçonàévitertoutrisque
électrique,dechuteoudesécurité
安全対策
• • 電源が入っている状態の製品または電線の終端処理を行わないでく
ださい。
• • ケーブル（電源ケーブルと充電ケーブルを含む）は、適切な配置と引
き回しを行い、電気障害やつまづきの危険性など、安全上のリスクを回避す
るようにしてください。
Misure di sicurezza
• Iterminialideilielettricinondevonoessererealizzateconilprodotto
e/olelineeelettrichesottotensione.
• Icavi(inclusiicavidialimentazioneediricarica)devonoessere
posizionatiestesiinmododaevitarepericolidiinciampo,rischidi
scosseelettricheopericoliperlasicurezza.
Säkerhetsåtgärder
• Monteringavkabelavslutningarfårintegörasnärproduktenoch/eller
elledningarnaärströmförda.
• Kablar(inklusiveelkablarochladdningskablar)skadrasochplaceraspå
såsättattriskförsnubblingsolyckorochandraolyckorkanundvikas.
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Table of Contents
Compliance Statements........................................................................i
Safety Statements..................................................................................iii
Product Diagram....................................................................................1
Front View.................................................................................................................................................... 1
Open View................................................................................................................................................... 2
Rear View...................................................................................................................................................... 3
Product Information..............................................................................4
Package Contents ..................................................................................................................................... 4
Requirements ............................................................................................................................................. 4
Install the Hard Drives ............................................................................................................................. 4
Set the RAID Dip Switches ..................................................................................................................... 5
Connect Power and Data Cables ........................................................................................................ 6
Power on the Drive Enclosure .............................................................................................................. 6
Format and Prepare the Drives ............................................................................................................ 6
Operation ................................................................................................6
LED Indicators............................................................................................................................................. 6
Warranty Information............................................................................11
1
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Product Diagram
Front View
Components Function
1Removable
Screws
• Secure the Front Panel to the Drive
Enclosure
2Power LED
Indicator
• Solid Blue: The Universal Power
Adapter is connected to a Power
Source
3Drive LED
Indicators
• Solid or ashing Blue and Red
• See LED Indicators (Page 7) section
for more details
2 3
1
4
2
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Open View
Components Function
1Drive Trays • Each Drive Tray holds a 2.5” HDD
or SSD
2Front Panel • Covers the Drive Bay during
Operation
1
2
3
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Rear View
Components Function
1Power Switch • Power the Drive Enclosure On (Ι) or
O (O)
2USB 3.1 Gen 2
Port
• Connect the Drive Enclosure to the
Host Computer
3DC +12V Port • Connect the Drive Enclosure to a
Power Source
4SET Button • Press and hold for 10 seconds to set
the RAID Mode
5RAID Switches • Congure the RAID Mode
6Fan Speed
Control Switch
• Set the fan speed to OFF,25%,50%,
or 100%
235
61
4
4
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Product Information
Package Contents
• USB 3.1 to SATA Drive Enclosure x 1
• USB C to Micro B Cable - 40.25 Inches x 1
• USB 3.0 A to Micro B Cable - 40.25 Inches x 1
• Universal Power Adapter (NA,EU,UK,ANZ)
- 70 inches (Cable) x 1
• Drive Trays x 2
• Allen Keys x 2
• User Manual x 1
Requirements
For the latest requirements please visit:
www.startech.com/S252BU313R.
• HDDs or SSDs x 2
• Host Computer
Installation
Install the Hard Drives
1. Use one of the included Hex Keys to remove the four
Removable Screws in the Front Panel of the Drive
Enclosure.
2. Remove the Front Panel from the Drive Enclosure.
3. Remove the Drive Trays.
4. With the SATA Connector facing outwards, carefully install
one side of the HDD or SSD into the Drive Tray.
5
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
5. Snap the HDD or SSD down into the other side of the tray.
Make sure that the SATA Connector on the HDD or SSD
lines up with the SATA Port in the Drive Bay.
6. Slide the Drive Tray into the Drive Enclosure.
7. Repeat steps 3 - 4 to install a second Drive.
8. Use the Hex Key and the four Removable Screws that were
removed in step 1 to reattach the Front Panel to the Drive
Enclosure.
Set the RAID Dip Switches
To set the RAID Conguration, use the table below and set the
Raid Switches located on the back of the Drive Enclosure.
RAID
Mode
Description Switch
1
Switch
2
GUI Allows access to both
Drives individually.
(Enabled Software-Based
Raid and Clear Hardware
Raid)
O O
RAID 0 Striping: Improves Drive
performance
O On
RAID 1 Mirror: Creates a duplicate
Drive on the second Drive
On O
SPAN Creates a large Single
Drive Volume that consists
of both Drives
On On
Autres manuels pour S252BU313R
1
Table des matières
Autres manuels StarTech.com Enceinte
StarTech.com
StarTech.com SATCASE25OTG Manuel utilisateur
StarTech.com
StarTech.com SAT3520U3R Manuel utilisateur
StarTech.com
StarTech.com SAT2510U3REM Manuel du système
StarTech.com
StarTech.com S2510BPU33 Manuel utilisateur
StarTech.com
StarTech.com INFOSAFE SAT3540ER Manuel utilisateur
StarTech.com
StarTech.com SAT3520U2R Manuel utilisateur
StarTech.com
StarTech.com S2510PESAT Manuel utilisateur
StarTech.com
StarTech.com S3520BU33ER Manuel utilisateur
StarTech.com
StarTech.com S252BU313R Manuel utilisateur
StarTech.com
StarTech.com S251BU31315 Manuel utilisateur
StarTech.com
StarTech.com SAT3540U3ER Manuel du système
StarTech.com
StarTech.com SAT3520UERGB Manuel utilisateur
StarTech.com
StarTech.com SAT3510U3VP Manuel utilisateur
StarTech.com
StarTech.com SAT2510BU2E Manuel utilisateur
StarTech.com
StarTech.com SATBP125VP Manuel utilisateur
StarTech.com
StarTech.com SAT3520U3SR Manuel du système
StarTech.com
StarTech.com RK1219WALH Manuel utilisateur
StarTech.com
StarTech.com S2510BMU33 Manuel du système
StarTech.com
StarTech.com SAT3510U2V Manuel utilisateur
StarTech.com
StarTech.com 2636CABINET Manuel utilisateur
