StarTech.com S2510BU3ISO Manuel utilisateur

Manual Revision: 02/03/2014

For the most up-to-date information, please visit: www.startech.com

DE: Bedienungsanleitung - de.startech.com

FR: Guide de l'utilisateur - fr.startech.com

ES: Guía del usuario - es.startech.com

IT: Guida per l'uso - it.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

S2510BU3ISO

USB 3.0 to 2.5” SATA HDD Enclosure with ISO

*actual product may vary from photos

Instruction Manual

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there

is no guarantee that interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which can be determined by

turning the equipment o and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver

is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other

protected names and/or symbols of third-party companies not related in any way to

StarTech.com. Where they occur these references are for illustrative purposes only and do not

represent an endorsement of a product or service by StarTech.com, or an endorsement of the

product(s) to which this manual applies by the third-party company in question. Regardless

of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby

acknowledges that all trademarks, registered trademarks, service marks, and other protected

names and/or symbols contained in this manual and related documents are the property of

their respective holders.

Instruction Manual

Table of Contents

Product Diagram ....................................................................................1

Top View ....................................................................................................................................................... 1

Front View .................................................................................................................................................... 1

Introduction............................................................................................2

Packaging Contents ................................................................................................................................. 2

System Requirements.............................................................................................................................. 2

Installation ..............................................................................................3

Hardware Installation .............................................................................................................................. 3

How to Use Virtual iSO ............................................................................................................................ 5

Use as External Hard Drive..................................................................................................................... 6

Disconnecting the Hard Drive ............................................................................................................. 6

Specications..........................................................................................7

Technical Support ..................................................................................8

Warranty Information............................................................................8

Instruction Manual

Product Diagram

Front View

Top View

USB Port

Mode

Button

Operation LEDs

Instruction Manual

Introduction

Packaging Contents

• 1x USB 3.0 to 2.5” SATA HDD enclosure

• 1x Carrying Pouch

• 1x USB 3.0 Cable

• 1x Instruction Manual

System Requirements

• Computer system with available USB 3.0 port (5 Gbit/s) or USB 2.0 port (480Mbps)

• 2.5” SATA hard drive or solid state drive (9.5mm height)

• Microsoft® Windows® 2000/XP/Server 2003/Vista/Server 2008 R2/7/8 (32/64-bit), or

Apple® Mac® OS 9.x/10, or Linux®

NOTE: For ISO functionality The File System on the Hard Drive must be NTFS. ISO

function is supported on Mac and Linux based operating systems. However, the NTFS

requirement limits the ISO creation to Windows based computer systems.

Instruction Manual

Installation

Hardware Installation

WARNING! Hard drives and storage enclosures require careful handling,

especially when being transported. If you are not careful with your hard disk, lost

data may result. Always handle your hard drive and storage device with caution.

Be sure that you are properly grounded by wearing an anti-static strap when

handling computer components or discharge yourself of any static electricity

build-up by touching a large grounded metal surface (such as the computer case)

for several seconds.

1. Open the enclosure by locating the thumb ridges. Pressing down slightly, slide the

back pane away from the top edge.

2. Connect the 2.5” SATA Hard Drive

Instruction Manual

3. Slide the back pane back into place.

4. With the enclosure fully assembled, connect the USB 3.0 cable from the enclosure to

a USB port on the host computer system using the included cable.

Instruction Manual

How to Use Virtual iSO

Initial Setup

NOTE: For ISO functionality The File System on the Hard Drive must be NTFS. ISO

function is supported on Mac and Linux based operating systems. However, the NTFS

requirement limits the ISO creation to Windows based computer systems.

1. Connect the enclosure to a host computer using the included USB 3.0 cable. The

native external Hard Drive drivers will be automatically installed.

2. Press the “<Mode” button to toggle and light the LED next to HDD.

3. Once the system has completed hard drive installation, Open Windows Explorer and

access the Root Directory on the External Hard Drive.

Click Start -> Computer -> Select Hard Drive

4. On the main directory of the Hard Drive, create 1 new folder for each ISO le you

would like to add (up to 3).

Right click on the Windows Explorer background -> New Folder

Name the folders as follows:

_iso1

_iso2

_iso3

NOTE: While the names are not case sensitive, the characters must be listed exactly as

above including the underscore (_) at the beginning.

Instruction Manual

5. Save the desired ISO le(s) in the directory of your choice. One le per folder.

6. Press the “<Mode” button to toggle to and light the LED next to the ISO le you wish

to work as a virtual BR/DVD/CD-ROM.

iSO_1 = _iso1

iSO_2 = _iso2

iSO_3 = _iso3

7. The selected iSO le will now function as a virtual BR/DVD/CD-ROM.

Use as External Hard Drive

Initial Setup

1. Press the “Mode” button to toggle and light the LED next to HDD.

2. The enclosure will now function as an external HDD.

Disconnecting the Hard Drive

Windows

1. Select the “Safely remove Hardware and Eject Media” icon, located in the task bar.

2. Select “Eject iSO M3” from the list that appears.

3. Wait for the message indicating that it is now safe to remove the device.

NOTE: Removing the connected drive prior to receiving notication that it is safe

to do so, could result in losing or corrupting data stored on the drive. Once the Safe

to Remove Hardware message appears, please disconnect the enclosure from the

computer by removing the USB connection.

Mac OS 9/10

To safely disconnect the attached drive from the host computer, close any windows

listing the contents of the removable drive. Once all windows are closed, click on the

USB storage icon on the desktop, and drag it to the Trash Can icon on the desktop.

Allow 5 seconds before physically removing the enclosure/drive from the computer.

Instruction Manual

Specications

Host Interface USB 3.0

External Connectors 1 x USB 3.0 female

Maximum Data Transfer Rate USB 3.0: 5 Gbit/s

Chipset ID Fujitsu MB86C311

Encryption Type AES-256bit

Power Adapter USB Powered

Enclosure Material Plastic

Operating Temperature 0°C ~ 60°C (32°F ~ 140°F)

Storage Temperature -20°C ~ 60°C (-4°F ~ 76°F)

Dimensions 135mmx78mmx16mm

Weight 75g

Compatible Operating Systems

Windows 2000/XP/Server 2003/Vista/

Server 2008 R2/7/8 (32/64-bit), Mac OS

9/10, Linux

Table des matières

Autres manuels StarTech.com Enceinte

StarTech.com

StarTech.com SAT1810U2 Manuel utilisateur

StarTech.com

StarTech.com SMS1BMU313 Manuel utilisateur

StarTech.com

StarTech.com S2510U33RUSM Manuel utilisateur

StarTech.com

StarTech.com RK920WALM Manuel utilisateur

StarTech.com

StarTech.com ESATCASE2 Manuel utilisateur

StarTech.com

StarTech.com RK616WALM Manuel utilisateur

StarTech.com

StarTech.com SATCASE25OTG Manuel utilisateur

StarTech.com

StarTech.com S2510BMU33CB Manuel du système

StarTech.com

StarTech.com IDECASE18U2B Manuel utilisateur

StarTech.com

StarTech.com S252BU313R Manuel utilisateur

StarTech.com

StarTech.com DRW115SAT Manuel utilisateur

StarTech.com

StarTech.com SAT3520U3SR Manuel du système

StarTech.com

StarTech.com 2TBT3-PCIE-ENCLOSURE Manuel utilisateur

StarTech.com

StarTech.com SAT3520U2R Manuel utilisateur

StarTech.com

StarTech.com S2510BMU33 Manuel du système

StarTech.com

StarTech.com S354UFER Manuel utilisateur

StarTech.com

StarTech.com SAT1810U2 Manuel utilisateur

StarTech.com

StarTech.com S354UFER Manuel utilisateur

StarTech.com

StarTech.com RK123WALHM Manuel utilisateur

StarTech.com

StarTech.com S352BU313R Manuel utilisateur

StarTech.com

StarTech.com SAT3540U2E Manuel utilisateur

StarTech.com

StarTech.com ATXFULL635V Manuel

StarTech.com

StarTech.com SM21BMU31C3 Manuel utilisateur

StarTech.com

StarTech.com S251BPU31C3 Manuel utilisateur

Manuels Enceinte populaires d'autres marques

SilentiumPC

SilentiumPC Armis AR5 Manuel

Pulsar

Pulsar 17/TRP80/DSPR Manuel utilisateur

Thermaltake

Thermaltake V150 TG Manuel utilisateur

MSI

MSI MPG SEKIRA 500X Manuel utilisateur

Antec

Antec Dark fleet DF-10 Manuel utilisateur

Nexans

Nexans WTC05 Manuel utilisateur

Peavey

Peavey DS 1502 Manuel utilisateur

D-Link

D-Link ShareCenter Pro DNS-1550-04 Manuel utilisateur

Rosewill

Rosewill RX82-U(JBOD) Manuel utilisateur

QNAP

QNAP SAS JBOD CLI 1.0 Manuel utilisateur

GAMDIAS

GAMDIAS Talos P1 Manuel utilisateur

Auvs

Auvs KR615 Manuel utilisateur

Digitus

Digitus DA-71114 Manuel utilisateur

CommScope

CommScope FDH 3000 Manuel utilisateur

FS FHD-FWME4 Manuel utilisateur

JBL

JBL CS1215T Manuel utilisateur

Pulsar

Pulsar ARAD-S4 Manuel utilisateur

Pulsar

Pulsar AWO454 Manuel utilisateur