Sony CCB-WD1 Guide de référence

Help Guide

Camera Control Box

CCB-WD1

This “Help Guide” explains how to operate the product or a camera connected to the product from a web browser on

your computer.

When the product is connected to a camera, you can turn the camera on/off or shoot images with the camera through

operations in the web browser. Connecting multiple cameras to multiple camera control boxes allows you to shoot

images simultaneously with multiple cameras or apply camera settings to multiple cameras at once.

Refer to the instruction manual for how to connect the product to a camera or a computer.

Operating the camera from the computer

Screen layout

Camera information area

Control area

Trademarks

Help Guide

Camera Control Box

CCB-WD1

Operating the camera from the computer

You can operate the camera from a web browser on the computer by connecting the product to the camera and the

computer.

Recommended computer environment

OS:

Windows 7/Windows 8.1/Windows 10

Mac OS X 10.11/macOS 10.12 - 10.13

Web browser:

Google Chrome/Internet Explorer*/Safari

Version 11.0 or later (as of December 2017)

Launch a web browser on the computer, and then enter the following URL into the address bar.

URL:

http://169.254.200.200/

The URL can also be found on the bottom of the product.

The screen for operating the camera will appear on the web browser.

Turn the camera on.

Make sure that the battery inside the camera is sufficiently charged.

You can also turn the camera on from the web browser.

Help Guide

Camera Control Box

CCB-WD1

Screen layout

This section explains the screen layout of the web browser when operating the product or camera.

Explanation of the screen

(A): Camera information area

The live views and shooting information for each connected camera are displayed here.

Select target cameras in this area before controlling them from the control area.

(B): Control area

In the “Camera” tab, you can perform operations on the cameras selected in the camera information area, such as

shooting images or changing the settings.

In the “Box” tab, you can set the synchronization signals for the products or initialize the products.

Hint

If a camera is turned on and connected to the product, but no live view or information for that camera is displayed on the screen,

refresh the web browser by pressing the F5 key on the keyboard.

Note

Do not use the “Back/Forward” buttons on the web browser.

Do not click the “Close” button on the web browser, except when you are done operating the cameras or the camera control

boxes.

Do not perform operations using multiple web browsers. The products may not work properly.

Related Topic

Camera information area

Control area

Help Guide

Camera Control Box

CCB-WD1

Camera information area

The live views and shooting information for each connected camera are displayed.

Camera information

(A): Camera control box information

A temporarily assigned number indicating the product’s position in the series, a checkbox to select the camera, the

camera label for the connected camera, and the software version of the product are displayed.

Checkbox

You can switch the selection status by clicking the checkbox.

Connected cameras are unselected initially. Make sure that the checkboxes for the target cameras are checked before

you operate or set up the cameras.

Camera label

You can edit the camera label by clicking it.

The camera’s model name and camera ID are displayed as the camera label initially.

(B): Live view

The live view for the camera is displayed.

Live-view frame rate

You can switch between “Low” and “Standard” as the live-view frame rate by double-clicking the live view. The current

frame rate of the live view is displayed below the live view.

Focus button

If you move the cursor over the live view, the “Focus” button will appear.

You can adjust the focus by clicking the “Focus” button (only in the manual focus mode).

Adjust the focus using .

(C): Shooting information

The shooting information for the camera is displayed.

Toolbar

You can use the toolbar to display grid lines over the live view or rotate the live view.

(Rotate/Reset Rotation)

Rotates the live view of the selected cameras. The rotation can be reset by clicking .

(Grid Line)

Displays grid lines over the live view. The type of grid lines changes each time you click this button.

(Select All/Cancel All)

Selects all the cameras. / Unselects all the cameras.

(Ascending Sort/Descending Sort)

Sorts the camera information by camera label in ascending order ( ) or in descending order ( ).

(Zoom Out/Zoom In)

Increases or decreases the magnification of the live view.

(Index Display/Main Information Display/Details Display)

Switches the method in which the camera information is displayed.

Hint

You can change the ordering of the camera information by dragging and dropping.

Note

When you change the combination of a camera control box and camera, any edited camera label is deleted. The model name

and camera ID of the connected camera are displayed as the camera label.

Setting the frame rate of the live view to “Standard” for multiple cameras may slow down the computer.

Related Topic

Control area

Help Guide

Camera Control Box

CCB-WD1

Control area

You can operate and configure the camera and the product.

“Camera” tab

You can perform shooting operations and change the settings for selected cameras using the “Camera” tab.

Shooting buttons

AF/AE ON

Performs auto-focusing and locks the exposure.

During execution of “AF/AE ON,” the message “Executing AF/AE...” appears in the shooting information field (camera

information area). You cannot change the settings for the camera while this message is displayed.

AF/AE OFF

Cancels auto-focusing and exposure locking.

AEL ON

Locks the exposure.

AEL OFF

Cancels exposure locking.

Shoots a still image.

This button works only when the camera is set to the still-image shooting mode.

Continuous shooting cannot be performed even if you press and hold this button. Use the “Cont. Shooting” buttons to

perform continuous shooting.

Starts movie recording.

This button works only when the camera is set to the movie recording mode.

Stops movie recording.

Cont. Shooting (Continuous shooting)

These buttons work only when the camera is set to the still-image shooting mode and the drive mode is set to the

continuous shooting mode.

Start

Starts continuous shooting.

During continuous shooting, the message “Executing Cont. Shooting...” appears in the shooting information field

(camera information area). You cannot change the settings for the camera while this message is displayed.

Stop

Stops continuous shooting.

HFR (High-Frame-Rate shooting)

These buttons work only when the camera is set to the HFR mode.

Standby

Switches the camera to the shooting standby screen.

Setting

Switches the camera to the shooting setting screen.

REC

Starts HFR shooting.

If the timing of recording is set to the start-trigger mode in the camera’s HFR shooting settings, capturing (shooting) will

start.

If the timing of recording is set to the end-trigger mode, capturing will end and the camera will start recording the movie

to the memory card.

Stop

If the timing of recording is set to the start-trigger mode in the camera’s HFR shooting settings, the camera will stop any

HFR shooting in progress.

Cancel

Cancels recording to the memory card.

(Power)

Autres manuels pour CCB-WD1

Table des matières

Autres manuels Sony Unité de contrôle

Sony

Sony MSU-900 Manuel utilisateur

Sony

Sony HDCU2080 Manuel utilisateur

Sony

Sony CBK-UPG01 Manuel utilisateur

Sony

Sony DTP-T1000 A Manuel utilisateur

Sony

Sony HXCU-FB80 4K/HD Manuel utilisateur

Sony

Sony MVS-6000 Manuel utilisateur

Sony

Sony PWS-100 Manuel utilisateur

Sony

Sony BKM-16R Manuel utilisateur

Sony

Sony DCU-8000 Manuel utilisateur

Sony

Sony DNUR-SY3 Manuel utilisateur

Sony

Sony BKMA-7045 Manuel utilisateur

Sony

Sony HDCU3100 Manuel utilisateur

Sony

Sony SVRM-911 Manuel utilisateur

Sony

Sony PVE-500 Manuel utilisateur

Sony

Sony FCB-ER8550 Manuel utilisateur

Sony

Sony PWS-110PR1 Manuel utilisateur

Sony

Sony Clie Gear PEGA-MSB1 Manuel utilisateur

Sony

Sony FCB-CX20DP Manuel utilisateur

Sony

Sony MB0402C2 Manuel utilisateur

Sony

Sony HDCU1000 Manuel utilisateur

Sony

Sony HDCU3100 Manuel utilisateur

Sony

Sony HKCU-FP2 Manuel utilisateur

Sony

Sony CCU-50P Manuel utilisateur

Sony

Sony HDCU2000 Manuel utilisateur

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur

Flyron

Flyron FN-BC04 Manuel utilisateur