Sanus SOA-AVS1 Manuel utilisateur
SOA-AVS1 INSTRUCTION MANUAL
We’ll Make It Stress-Free
If you have any questions along the way, just give us a call.
1-800-359-5520. We’re ready to help!
2
IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ ENTIRE MANUAL PRIOR TO USE – SAVE THESE INSTRUCTIONS
Before You Begin
Please check the following items:
Any accessories you plan to use do not exceed the specified weight limit.
The wall you chose to mount your shelf is wood stud, drywall, solid concrete, or concrete block.
You read and understand these directions.
You have the tools needed for installation.
If you do not understand these instructions, or have doubts about the safety of the installation, assembly or use of this product, contact
Customer Service or call a qualified contractor.
CAUTION: Avoid potential personal injuries and property damage!
●Do not use this product for any purpose not explicitly specified by manufacturer.
●Do not place objects heavier than 15 lb (6.8 kg) on shelf.
●Do not place a TV on shelf.
●Do not allow children to climb or hang on shelf.
●Manufacturer is not responsible for damage or injury caused by incorrect assembly or use.
●This product is designed for use in wood stud, drywall, solid concrete and concrete block walls.
Para instrucciones en Español, ver páginas 16-19
If you have any questions,
please contact
Customer Service:
1-800-359-5520
3
Tools NeededWeight Limit
15 lb (6.8 kg)
DO NOT EXCEED!
Awl
Pencil Level
Stud Finder
Stud Finder
Screwdriver
Tape
Measure
1/8 in.
3 mm)
Wood
Drill Bit
Drill Bit
Electric Drill
Hammer
Hammer
7/16 in.
(11 mm)
Socket
Wrench
Drill Bit
3/8 in.
(10 mm)
Concrete
3/8 in.
(10 mm)
Drywall
Installations
Installations
Installations
Wood Stud
Concrete
Drywall
Features
Can be mounted to drywall,
wood stud, or concrete.
Stackable to accommodate
multiple components
—DO NOT exceed 15 lb (6.8 kg)
on each shelf.
4
NOTE: Not all hardware included will be used.
Supplied Parts and Hardware
WARNING: This product contains small items that could be a choking hazard if swallowed.
Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to
your dealer; contact Customer Service. Never use damaged parts!
Parts and Hardware for STEP 1 Parts and Hardware for STEP 2
For concrete installations ONLY
Lag Bolt
Wall Screws
Washer
Glass Shelf
Plate
Hex Key
Shelf Screw
M5:
KEY:
DRYWALL ANCHOR:
LAG SCREW:
Plate Screw
Wall Plate
Drywall Wall
Anchors
02
04 05
06
09
10 11
03
x1 x1
x1 x1
x1
x1
x1
x2
x2
x3
x3
01
07
08
1/4 x 2 ½ in.
#8 x 2 in. M5 x 20 M5 x 6
M3
Anchor (Concrete) Ux10x60R
CAUTION: Do not use in drywall or wood
5
Dimension Specifications in. [mm]
1.11
28.1
6.3
159.9
12.50
317.5
17.00
431.8
1.11
28.1
5.11
129.8
6.3
159.9
12.50
317.5
17.00
431.8
Single shelf configuration Stacked configuration
6
1 2
≤ 16 mm
(5/8 in.)
STEP 1A
01
CAUTION: Avoid potential personal injuries and property damage!
●Drywall covering the wall must not exceed 16 mm (5/8 in.).
●Minimum wood stud size: common 51 x 102 mm (2 x 4 in.) nominal 38 x 89 mm (1½ x 3½ in.).
1. Locate your stud(s). Verify the center of the stud using an awl, a thin nail, or an edge to edge stud finder.
2. Remove the front (F) and top (T) covers from the wall plate 01 .
(F)
(T)
Attach the Wall Plate to the Wall
Wood Stud Installation
IMPORTANT: For multiple-shelf stacking configurations, stack from the top down.
7
3
01
4 5
STEP 1A
02
03
01
04
3. Level the wall plate 01 and mark the two middle hole locations.
4. Drill pilot holes using a 3 mm (1/8 in.) diameter drill bit.
IMPORTANT: Pilot holes must be drilled to a depth of 63.5 mm (2½ in.).
5. Install using lag bolt 02 and washer 03 in the TOP hole and a wall screw 04 in the BOTTOM hole. Tighten lag bolt 02 and screw 04
only until they are pulled firmly against the wall plate 01 .
CAUTION: Improper use could reduce the holding power of the lag bolt and screw. DO NOT over-tighten the lag bolt and screw.
3 mm
(1/8 in.)
63.5 mm (2½ in.)
8
1
STEP 1B
Solid Concrete or Concrete Block Installation
Attach the Wall Plate to the Wall
1. Level the wall plate 01 and mark the hole locations.
2. Remove the front (F) and top (T) covers from the wall plate 01 .
IMPORTANT: For multiple-shelf stacking configurations, stack from the top down.
2
01
(F)
(T)
CAUTION: Avoid potential personal injuries and property damage!
●Mount the wall plate 01 directly onto the concrete surface
●Minimum solid concrete thickness: 203mm (8 in.)
●Minimum concrete block size: 203 x 203 x 406 mm (8 x 8x 16 in.)
01
9
STEP 1B
3 4 5
06
10 mm
(3/8 in.)
75 mm (3in.)
06
05
02
03
01
04
3. Drill pilot holes using a 10 mm (3/8 in.) diameter drill bit.
IMPORTANT: Pilot holes must be drilled to a depth of 75 mm (3 in.). Never drill into the mortar between blocks.
4. Insert anchor (concrete) 06 in the TOP hole and a dry wall anchor 05 in the BOTTOM hole.
CAUTION: Be sure the anchors are seated flush with the concrete surface.
5. Install using lag bolt 02 and washer 03 (into anchor (concrete) 06 )in the TOP hole, and a wall screw 04 (into dry wall anchor 05 ) in
the BOTTOM hole. Tighten lag bolt 02 and screw 04 only until they are pulled firmly against the wall plate 01 .
CAUTION: Improper use could reduce the holding power of the lag bolt and screw. DO NOT over-tighten the lag bolt and screw.
10
1
STEP 1C
IMPORTANT: For multiple-shelf stacking configurations, stack from the top down.
01
1. Verify a space BETWEEN any studs. Level the wall plate 01 and mark the three hole locations.
2. Remove the front (F) and top (T) covers from the wall plate 01 .
Attach the Wall Plate to the Wall
Drywall Installation
2
01
(F)
(T)
CAUTION:
Avoid potential injuries or property damage!
●Mount the wall plate 01 directly onto the wall.
●Drywall covering the wall must not exceed 13mm (1/2 in.).
●Do not install anchors into the seam between drywall pieces.
Table des matières
Autres manuels Sanus Support TV
Sanus
Sanus VDLT17 Manuel utilisateur
Sanus
Sanus VSF409 Manuel utilisateur
Sanus
Sanus BML1 Manuel utilisateur
Sanus
Sanus Sanus VisionMount LL11-B1 Manuel utilisateur
Sanus
Sanus SLF428-B2 Manuel utilisateur
Sanus
Sanus Classic MLF20 Manuel utilisateur
Sanus
Sanus VISIONMOUNT VMF Manuel utilisateur
Sanus
Sanus VSF415B1 Manuel utilisateur
Sanus
Sanus Classic MLL12 Manuel utilisateur
Sanus
Sanus VMCA10 Manuel utilisateur
Sanus
Sanus VXT7-B2 Manuel utilisateur
Sanus
Sanus VisionMount ML11 Manuel utilisateur
Sanus
Sanus SA809 Manuel utilisateur
Sanus
Sanus VSF409B1 Manuel utilisateur
Sanus
Sanus VisionMount LT25 Manuel utilisateur
Sanus
Sanus MMF12b Manuel utilisateur
Sanus
Sanus VisionMount ML11 Manuel utilisateur
Sanus
Sanus New VisionMount VLL10-B1 Manuel utilisateur
Sanus
Sanus BXL1 Manuel utilisateur
Sanus
Sanus VLL5-B1 Manuel utilisateur
