Sanus MMF12b Manuel utilisateur
MMF12b Instruction Manual
2
Does your TV weigh more than 60 lb (27 kg) including accessories?
No
—
Perfect!
Yes
—
This mount is NOT compatible. Visit MountFinder.Sanus.com or call 1-800-359-5520 (UK: 0800-056-2853) to find a compatible mount.
IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS – PLEASE READ ENTIRE MANUAL PRIOR TO USE
Before getting started, let’s make sure this mount is perfect for you!
60 lb
(27 kg)
Ready to begin?
Please read through these instructions completely to be sure you’re comfortable with this easy install process. Also check your TV
owner’s manual to see if there are any special requirements for mounting your TV.
If you do not understand these instructions or have doubts about the safety of the installation, assembly or use of this product, contact
Customer Service at 1-800-359-5520 (UK: 0800-056-2853).
CAUTION: Avoid potential personal injuries and property damage!
ƕThis product is designed for use in wood stud, solid concrete, and concrete block walls - DO NOT install into drywall alone
ƕThe wall must be capable of supporting five times the weight of the TV and mount combined
ƕDo not use this product for any purpose not explicitly specified by manufacturer
ƕManufacturer is not responsible for damage or injury caused by incorrect assembly or use
1
2
3
4
What is your wall made of?
?
Solid concrete or
concrete block? Perfect! Unsure? Call 1-800-359-5520
(UK: 0800-056-2853)
Drywall with
wood studs? Perfect!
3/8 in.
(10 mm)
Do you have all of the tools needed?
7/32 in.
(5.5 mm) 1/2 in.
(13 mm)
Stud Finder Awl Pencil Level Phillips
Screwdriver Tape
Measure Wood
Drill Bit Masonry
Drill Bit
Drill Hammer Socket
3
Dimensions
in.
[mm]
16.54
[420.0]
8.25
209.6
15.77
[400.6]
3.93 to 16.54
[100 to 420]
18.70
[455.0]
5.00
[127.0]
12.02
[
305.4
]
3.02
[76.8]
15° 15°
4
Parts and Hardware
WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts
are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service.
Never use damaged parts!
Parts and Hardware for STEP 1
NOTE: Not all hardware included will be used.
M4 x 12mm
M5 x 12mm
M6 x 12mm M6 x 35mm
M5 x 35mm
M4 x 35mm
M6 x 20mm
M8 x 16mm M8 x 35mm
M8 x 20mm
TV Interface Brackets
Right Left
01 x1 02 x1
03 x4 09 x4
04 x4 10 x4
05 x4 07 x4 11 x4
06 x4 08 x4 12 x4
13 x4 14 x4
15 x4
TV Screws
Washers
Spacers
M
4
/
M
5
M
6
/
M
8
5
8-32 x 3/8 in.
3/16 in. 5/32 in.
8-32 x 9/16 in.
Horizontal TV Interface Brackets
16 x1 17 x1
Parts and Hardware for STEP 2
5⁄16 in. x 2¾ in.
Horizontal Bracket
Interface Screws
18 x4
Parts and Hardware for STEP 1 Continued
Additional Hardware
Wall Plate/Arm Lag Bolts Locking Screw
Hex
Keys
Anchors
Washers
21 x2
22 x2
23 x1 24 x1
25 x1 26 x1
x1
19
20 x2
Top Bottom
6
STEP 1 Attach Brackets to TV
FLAT BACK ROUND BACK CABLESINSET HOLES
1-1 Select TV
Screw Diameter
1-2 Select TV
Screw Length
Hand thread screws into the threaded inserts
on the back of your TV to determine which
screw diameter (M4, M5, M6, or M8) to use.
ab
If your TV has a flat back AND you want your TV closer to
the wall, use the shorter screws (a).
Use the spacers and longer screws (b) to accommodate:
• Round/irregular back TVs
• TVs with inset mounting holes
• Extra space needed for cables
Too Short
Too Long
CAUTION:
Verify adequate thread
engagment with the screw or
screw/spacer combination.
-Too short will not hold the TV.
-Too long will damage the TV.
Correct
Standard configurations
are shown. For special
applications, or if you
are uncertain about your
hardware selection,
contact Customer Service
at 1-800-359-5520.
M6M5M4 M8
7
1-3 Attach L/R TV Interface Brackets
Ensure that your brackets are centered and level on the back of the TV. Secure brackets using your screw/washer (Flat Back) or screw/washer/
spacer (Round Back / Extra Space) selection.
aFlat Back
bRound Back / Extra Space
02
01
03
09
04
10
05
11 12
06 07
13
13
15
14
14
08
8
1-4 Attach Horizontal TV Interface Brackets
Ensure horizontal brackets 16 17 are centered and screws 18 are securely fastened.
02 02
01 01
16
16
17
17
18
18
16
02
9
STEP 2 Attach Wall Plate to Wall Wood Stud Option
CAUTION: Avoid potential personal injuries and property damage!
ƕDrywall covering the wall must not exceed 5/8 in. (16 mm)
ƕMinimum wood stud size: common 2 x 4 in. (51 x 102 mm) nominal 1½ x 3½ in. (38 x 89 mm)
1. Locate your stud. Verify and mark the center of the stud by finding the stud edges using an awl, a thin nail, or an edge to edge stud finder.
2. Level the wall plate 19 and mark your hole locations.
2
19
1Max. 5/8 in.
(16 mm)
10
4
33 in.
(75 mm)
19
3. Drill pilot holes using a 7/32 in. (5.5 mm) diameter drill bit.
IMPORTANT: Be sure to drill into the center of the stud.
IMPORTANT: Pilot holes must be drilled to a depth of 3 in. (75 mm).
4. Install wall plate 19 using two lag bolts 20 and two washers 21 . Tighten the lag bolts only until they are pulled firmly against the wall
plate.
CAUTION: Avoid potential personal injury or property damage! Both lag bolts 20 MUST BE firmly tightened to prevent unwanted
movement of the wall plate 19 . Ensure the wall plate is securely fastened to the wall before continuing on to the next step.
7/32 in.
(5.5 mm) 19 18 19
Table des matières
Langues :
Autres manuels Sanus Support TV
Sanus
Sanus SAN12 Manuel utilisateur
Sanus
Sanus Premium VLT5B1 Manuel utilisateur
Sanus
Sanus VLF320 Manuel utilisateur
Sanus
Sanus SLT4 Manuel utilisateur
Sanus
Sanus VLT5 Manuel utilisateur
Sanus
Sanus Classic MMT15 Manuel utilisateur
Sanus
Sanus VisionMount VLF210 Manuel utilisateur
Sanus
Sanus SLF226-B8 Manuel utilisateur
Sanus
Sanus 6901-170131 Manuel utilisateur
Sanus
Sanus VLT7-B2 Manuel utilisateur
Sanus
Sanus VSF415 Manuel utilisateur
Sanus
Sanus VMT5 Manuel utilisateur
Sanus
Sanus XF228 Manuel utilisateur
Sanus
Sanus New VisionMount LF228-B1 Manuel utilisateur
Sanus
Sanus CLASSIC MSF07c Manuel utilisateur
Sanus
Sanus 65PFL5604/F7 Manuel utilisateur
Sanus
Sanus HMF115 Manuel utilisateur
Sanus
Sanus F180c Manuel utilisateur
Sanus
Sanus New VisionMount VST15-B1 Manuel utilisateur
Sanus
Sanus VisionMount MC1A Manuel utilisateur
