Sanus F215 Manuel utilisateur

Our US-based

install experts

are standing

by to help.

Call us at:

888-333-9952

Or, chat at:

SANUS.com/chatSV

Get it right the

ﬁrst time.

HeightFinder™

shows you

where to drill.

Check it out at:

SANUS.com/1171

Want to watch

a video that

shows how

easy this DIY

project will be?

Watch it now at:

SANUS.com/2773

Recommended placement

WE’RE HERE TO HELP

215

INSTRUCTION MANUAL

Para Español ver página 22

BONUS!

Two 10"

Cable

Tunnels

4K HDMI

Cable

IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS – PLEASE READ ENTIRE MANUAL PRIOR TO USE

Before getting started, let’s make sure this mount is perfect for you!

—

Perfect!

Yes

—

This mount is NOT compatible. Visit MountFinder.sanus.com or call

1-888-333-9952 to ﬁnd a compatible mount.

Do you have

all the tools

needed?

What is your

wall made of?

50 lbs.

(22.6 kg)

Ready to begin?

Does your TV

(including accessories)

weigh more than

50 lbs. (22.6 kg)?

Drywall with

wood studs?

Solid concrete or

concrete block?

Perfect!

Wood Stud Install

Concrete Install

Awl

Pencil Level Stud Finder

Screwdriver

Tape

Measure

7/32 in.

(5.5 mm)

Wood

Drill Bit

Electric

Drill Hammer

1/2 in.

(13 mm)

Socket

Wrench Drill Bit

3/8 in.

(10 mm)

Concrete

Unsure?

Call Customer Service: 1-888-333-9952

Concrete kit CMK1 (not included)

CAUTION:

DO NOT

install into

drywall alone

Please read through these instructions completely to be sure you’re comfortable with this easy install process.

Also check your TV owner’s manual to see if there are any special requirements for mounting your TV.

If you do not understand these instructions or have doubts about the safety of the installation, assembly or use

of this product, contact Customer Service at 1-888-333-9952.

CAUTION: Avoid potential personal injury or property damage!

●This product is designed for use in wood stud, solid concrete, and concrete block walls - DO NOT install into drywall alone

●This product is designed for INDOOR USE ONLY

●The wall must be capable of supporting ﬁve times the weight of the TV and mount combined

●Do not use this product for any purpose not explicitly speciﬁed by manufacturer

●Manufacturer is not responsible for damage or injury caused by incorrect assembly or use

Dimensions

7.87in

200mm

3.94in

100mm

15.75in

400mm

11.81in

300mm

.34in

8.7mm

4.02in

102mm

.99in

25.2mm

45deg 45deg

5deg

15deg

15.0in

381mm

9.06in

230mm

8.27in

210mm

2.91in

74mm

.33in

8.4mm

3.1in

78mm

2.8in

71mm

WITHOUT EXTENSION

BRACKETS

17.07in

433.7mm

17.07in

433.7mm

6deg

TV INTERFACE

WALL PLATE

ROLL CONTROL

TOP VIEW - EXTENDED

TOP VIEW - RETRACTED

SIDE VIEW - EXTENDED

SIDE VIEW - RETRACTED

3-D

Before getting started, let’s make sure this mount is perfect for you!

M4 x 12mm

M6 x 12mm M6 x 35mm

M4 x 35mm

M6 x 20mm

M8 x 16mm

M8 x 12mm M8 x 35mm

5/16 x 2¾ in.

2.5mm 22mm

M8 x 25mm M8 x 50mm

WELCOME! THANKS FOR

CHOOSING SANUS VUEPOINT.

THIS IS GOING TO BE EASY!

LET’S GET STARTED.

STEP 1

Attach TV brackets to back of TV.

STEP 2

Attach wall plate to wall using

provided hardware.

STEP 3

Hang TV on arm.

Our live, US-based install

experts are standing by to help.

Call us at:

Or,chat at:

Get it right the rst time!

HeightFinder

™

shows you

where to drill.

Use it now at:

Want to watch a video that

shows how easy this is?

Watch it now at:

M5 x 6mm

5/16 x 2¾ in.

Fischer UX10 x 60R Anchor

NOTE: Not all hardware included will be used.

WARNING: This product contains small items that could be a choking hazard if swallowed.

Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to

your dealer; contact Customer Service. Never use damaged parts!

Supplied Parts and Hardware

STEP 1 Parts and Hardware

Faceplate

TV Screws

Washers Spacers

TV Bracket

Extender

TV Bracket

Screw

08 x4 09 x4

12 x4

11 x4

10 x4

13 x4 14 x4

16 x4

15 x4

04 x4 05 x4 06 x4 07 x4

03 x8

02 x4

M4 x 12mm

M6 x 12mm M6 x 35mm

M4 x 35mm

M6 x 20mm

M8 x 16mm

M8 x 12mm M8 x 35mm

5/16 x 2¾ in.

2.5mm 22mm

M8 x 25mm M8 x 50mm

WELCOME! THANKS FOR

CHOOSING SANUS VUEPOINT.

THIS IS GOING TO BE EASY!

LET’S GET STARTED.

STEP 1

Attach TV brackets to back of TV.

STEP 2

Attach wall plate to wall using

provided hardware.

STEP 3

Hang TV on arm.

Our live, US-based install

experts are standing by to help.

Call us at:

Or,chat at:

Get it right the rst time!

HeightFinder

™

shows you

where to drill.

Use it now at:

Want to watch a video that

shows how easy this is?

Watch it now at:

M5 x 6mm

5/16 x 2¾ in.

Fischer UX10 x 60R Anchor

STEP 2B: Concrete Installation Kit CMK1 [NOT INCLUDED]

STEP 2 Parts and Hardware

STEP 3 Parts and Hardware

Nut Cap

17 x1 18 x1

Full Motion Arm

Wall Plate

Template

Lag Bolt

Concrete Anchor

19 x2

21 x1

20 x1 22 x1

Washer Clip Long Clip Cabel

Tunnel

Contact Customer Service at 1-888-333-9952 to have these

additional pieces shipped directly to you.

Locking Screw

Cable Tunnel Kit

23 x1

24 x2

10 in.

(25.4 cm)

2.5 in.

(6.3 cm)

inches

inch dimensions are approximate

inches cm mm

3 7.5 75

4 10 100

7 ⅞ 20 200

11 ¾ 30 300

15 ¾ 40 400

STEP 1 Attach Faceplate to TV

1.1 Measure Your TV Hole Pattern 1.2 Assemble Your Faceplate

Measure the width and height of your TV

hole pattern in mm.

Record your measurements:

Width_______mm x Height_______mm

Based on your TV hole pattern measurements

(Wmm x Hmm), determine your Faceplate

configuration: A, B, C, D or E.

200

[7 ⅞ in.]

200

[7 ⅞ in.]

400

[15¾ in.]

400

[15¾ in.]

These smaller hole patterns only use

Faceplate 01 . Do not use the four TV

brackets 02 and eight screws 03 .

100

[4 in.]

100

[4 in.]

Assemble TV brackets 02 onto Faceplate

01 and secure using eight screws 03 in

the corner holes indicated.

300

[11 ¾ in.]

300

[11 ¾ in.]

100 x 100

200 x 100

200 x 200

For TV Hole Pattern

Measurements

(Dimensions in mm)

300 x 300

400 x 400

For TV Hole Pattern

Measurements

(Dimensions in mm)

D E

200

[7 ⅞ in.]

200

[7 ⅞ in.]

Assemble TV brackets 02 onto Faceplate

01 and secure using eight screws 03 in

the corner holes indicated.

Assemble TV brackets 02 onto Faceplate

01 and secure using eight screws 03 in

the corner holes indicated.

Assemble TV brackets 02 onto Faceplate

01 and secure using eight screws 03 in

the corner holes indicated.

400

[15¾ in.]

400

[15 ¾ in.]

400

[15¾ in.]

300

[11 ¾ in.]

300

[11 ¾ in.]

300

[11 ¾ in.]

400 x 300

For TV Hole Pattern

Measurements

(Dimensions in mm)

300 x 200

400 x 200

For TV Hole Pattern

Measurements

(Dimensions in mm) 200 x 300

200 x 400

For TV Hole Pattern

Measurements

(Dimensions in mm)

Too Long

Too Short

Correct

1.3 Select TV Screw Diameter 1.4 Select TV Screw Length

Standard configurations

are shown. For special

applications, or if you

are uncertain about your

hardware selection, contact

Customer Service.

CAUTION:

Verify adequate thread

engagement with your screw/

washer/spacer combination

AND TV bracket.

–Too short will not hold the TV.

–Too long will damage the TV.

a:For flat-back TVs,

no spacers 06 or

07 required.

b:Spacers 06 or 07 supplied for:

●Round (irregular) back TVs

●Extra space needed (for cables

or inset mounting holes)

FLAT BACK ROUND BACK CABLES INSET HOLES

Test the four TV screw diameters (M4,

M6, and M8) in the threaded inserts on

the back of your TV to determine which

screw diameter fits your TV.

06 07

1.5 Attach TV Bracket

TV Bracket Conﬁguration B

Illustrated (with spacers) 0406 0507

04 05

a: Flat Back

b: Round Back / Extra Space

TV Bracket Conﬁguration A

Illustrated (with spacers)

Position your TV bracket configuration (A, B, C, D or E) onto your TV, making sure the bracket is both centered and level over your TV hole pattern.

NOTE: The hanging tab Hon faceplate 01 must be oriented toward the top of the TV.

Secure the TV bracket using your selection: (a) screw/washer or (b) screw/washer/spacer.

CAUTION: Avoid potential personal injuries and property damage! DO NOT use power tools for this step. Tighten the screws only enough to

secure the TV bracket to the TV. DO NOT overtighten the screws.

1. Locate your stud. Verify and mark the center of the stud by finding the stud edges using an awl, a thin nail, or an edge to edge stud finder.

2. Position the template 17 at your desired height and line up the holes with your stud center line. Level the template and tape in place.

WELCOME! THANKS FOR

CHOOSING SANUS VUEPOINT.

THIS IS GOING TO BE EASY!

LET’S GET STARTED.

STEP 1

Attach TV brackets to back of TV.

STEP 2

Attach wall plate to wall using

provided hardware.

STEP 3

Hang TV on arm.

Our live, US-based install

experts are standing by to help.

Call us at:

Or, chat at:

Get it right the rst time!

HeightFinder

™

shows you

where to drill.

Use it now at:

Want to watch a video that

shows how easy this is?

Watch it now at:

WELCOME! THANKS FOR

CHOOSING SANUS VUEPOINT.

THIS IS GOING TO BE EASY!

LET’S GET STARTED.

STEP 1

Attach TV brackets to back of TV.

STEP 2

Attach wall plate to wall using

provided hardware.

STEP 3

Hang TV on arm.

Our live, US-based install

experts are standing by to help.

Call us at:

Or, chat at:

Get it right the rst time!

HeightFinder

™

shows you

where to drill.

Use it now at:

Want to watch a video that

shows how easy this is?

Watch it now at:

WELCOME! THANKS FOR

CHOOSING SANUS VUEPOINT.

THIS IS GOING TO BE EASY!

LET’S GET STARTED.

STEP 1

Attach TV brackets to back of TV.

STEP 2

Attach wall plate to wall using

provided hardware.

STEP 3

Hang TV on arm.

Our live, US-based install

experts are standing by to help.

Call us at:

Or, chat at:

Get it right the rst time!

HeightFinder

™

shows you

where to drill.

Use it now at:

Want to watch a video that

shows how easy this is?

Watch it now at:

WELCOME! THANKS FOR

CHOOSING SANUS VUEPOINT.

THIS IS GOING TO BE EASY!

LET’S GET STARTED.

STEP 1

Attach TV brackets to back of TV.

STEP 2

Attach wall plate to wall using

provided hardware.

STEP 3

Hang TV on arm.

Our live, US-based install

experts are standing by to help.

Call us at:

Or, chat at:

Get it right the rst time!

HeightFinder

™

shows you

where to drill.

Use it now at:

Want to watch a video that

shows how easy this is?

Watch it now at:

≤ 5/8 in.

(16 mm)

STEP 2A Attach Wall Plate to Wall Wood Stud Installation

CAUTION: Avoid potential personal injury or property damage!

●Drywall covering the wall must not exceed 5/8 in. (16 mm)

●Minimum wood stud size: nominal 2 x 4 in. (51 x 102 mm) actual 1 ½x 3 ½in. (38 x 89 mm)

Table des matières

Autres manuels Sanus Support et étagère

Sanus

Sanus VTVS1 Manuel utilisateur

Sanus

Sanus VisionMount MT25 Manuel utilisateur

Sanus

Sanus SSASB2 Manuel utilisateur

Sanus

Sanus VISIONMOUNT LRF118 Manuel utilisateur

Sanus

Sanus OLF22-B2 Manuel utilisateur

Sanus

Sanus OLF24-B2 Manuel utilisateur

Sanus

Sanus A701 Manuel utilisateur

Sanus

Sanus VLT16 Manuel utilisateur

Sanus

Sanus Sanus VisionMount ML22 Manuel utilisateur

Sanus

Sanus VLT35-B1 Manuel utilisateur

Sanus

Sanus HTB4B Manuel utilisateur

Sanus

Sanus VMD1 Manuel utilisateur

Sanus

Sanus F11C Manuel utilisateur

Sanus

Sanus VisionMount VMPl50A Manuel utilisateur

Sanus

Sanus BXT3 Manuel utilisateur

Sanus

Sanus VML41 Manuel utilisateur

Sanus

Sanus SLT2 Manuel utilisateur

Sanus

Sanus WSEDM1-B2 Manuel utilisateur

Sanus

Sanus VMF518 Manuel utilisateur

Sanus

Sanus FSF110 Manuel utilisateur

Sanus

Sanus WSS21 Manuel utilisateur

Sanus

Sanus VisionMount VMF220 Manuel utilisateur

Sanus

Sanus LR1A Manuel utilisateur

Sanus

Sanus VM300 Manuel utilisateur

Manuels Support et étagère populaires d'autres marques

Salamander

Salamander Acadia AC/W/L400/WH Manuel utilisateur

Fohhn

Fohhn VAT-09 Guide de l'utilisateur

ricoo

ricoo FS0522 Manuel utilisateur

AMSOIL

AMSOIL BMK-22 Guide rapide

Kargo Master

Kargo Master 48220 Manuel utilisateur

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manuel utilisateur

ricoo

ricoo S1222 Manuel utilisateur

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manuel utilisateur

VidaBox

VidaBox VB MNT FFS2 Manuel utilisateur

Welch Allyn

Welch Allyn 48960 Manuel utilisateur

Arkon

Arkon CM035-ST-2 Manuel utilisateur

PROEL

PROEL PLWIN60C Manuel utilisateur

Agilent Technologies

Agilent Technologies E2609B Manuel utilisateur

Mustang

Mustang MV-ARM4 Manuel utilisateur

Mounting Solutions

Mounting Solutions WRM-320 Manuel utilisateur

Pyle

Pyle PMKSPAD1 Manuel utilisateur

ShelterIt

ShelterIt 21208 Manuel utilisateur

SPL

SPL RackPack?4 1040 Manuel utilisateur