Sanus FSF110 Manuel utilisateur
FSF110
INSTRUCTION MANUAL
Our US-based
install experts
are standing
by to help.
Call us at:
888-333-9952
Or, chat at:
SANUS.com/chatSV
Get it right the
first time.
HeightFinder™
shows you
where to drill.
Check it out at:
SANUS.com/1171
Want to watch
a video that
shows how
easy this DIY
project will be?
Watch it now at:
SANUS.com/2772
WE’RE HERE TO HELP
+
4K HDMI
Cable
BONUS!
2
50 lb
(22.67 kg)
IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS – PLEASE READ ENTIRE MANUAL PRIOR TO USE
Before getting started, let’s make sure this mount is perfect for you! Para Español ver página 20
No
—
Perfect!
Yes
—
This mount is NOT compatible. Visit MountFinder.Sanus.com or call
Customer Service to find a compatible mount.
Do you have
all the tools
needed?
1
2
3
4
What is your
wall made of?
Ready to begin?
Does your TV
(including accessories)
weigh more than
50 lb (22.67 kg)?
Drywall with
wood studs?
Solid concrete or
concrete block?
Perfect!
Unsure?
Call Customer Service
Requires Concrete kit CMK1 (not included)
CAUTION:
DO NOT
install into
drywall alone
Wood Stud Install
Concrete Install
Awl
Pencil Level Stud Finder
Screwdriver
Tape
Measure
7/32 in.
(5.5 mm)
Wood
Drill Bit
Electric
Drill Hammer
1/2 in.
(13 mm)
Socket
Wrench Drill Bit
3/8 in.
(10 mm)
Concrete
Please read through these instructions completely to be sure you’re comfortable with this easy install process.
Also check your TV owner’s manual to see if there are any special requirements for mounting your TV.
If you do not understand these instructions or have doubts about the safety of the installation, assembly or use
of this product, contact Customer Service.
CAUTION: Avoid potential personal injury or property damage!
●This product is designed for use in wood stud, solid concrete, and concrete block walls - DO NOT install into drywall alone
●This product is designed for INDOOR USE ONLY
●The wall must be capable of supporting five times the weight of the TV and mount combined
●Do not use this product for any purpose not explicitly specified by manufacturer
●Manufacturer is not responsible for damage or injury caused by incorrect assembly or use
3
Before getting started, let’s make sure this mount is perfect for you!
2.95
[75.0]
3.94
[100.0]
2.95
75.0
3.94
100.0
7.87
200.0
7.87
200.0
10.42
264.8
6.40
162.5
16° 16°
0.86
21.9
OFFSET
3.16
80.3
8.50
215.9
3.03
77.0
3° ROLL LEFT
3° ROLL RIGHT
TV INTERFACE
WALL PLATE
FULLY ASSEMBLED MOUNT
TOP VIEW - EXTENDED
TOP VIEW - RETRACTED
SIDE VIEW - EXTENDED
SIDE VIEW - RETRACTED
3-D
in.
[mm]
Dimensions
4
M4 x 8mm
M4 x 12mm
M6 x 12mm
M4 x 35mm
M6 x 35mm
M8 x 20mm
M4 M6/M8
NOTE: Not all hardware included will be used.
WARNING: This product contains small items that could be a choking hazard if swallowed.
Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to
your dealer; contact Customer Service. Never use damaged parts!
Supplied Parts and Hardware
STEP 1 Parts and Hardware
04
05
06
07
08
x4
x4
x4
x4
x4
TV Screws
Washers
Spacers
09 10
11
x4 x4
x4
22 mm
TV Bracket
Extenders
TV Bracket
TV Bracket
Extender
Screws
02 03 x8
x4
01 x1
5
THIS WAY UP
5/16 x 2 ½ in. 8-32 in.
8-32 x 3⁄8 in.
7/32 in.
5/16 x 2¾ in.
Fischer UX10 x 60R Anchor
STEP 2 Parts and Hardware STEP 3 Hardware
Additional Hardware
Wall Plate
Assembly
Wall Plate Template
12
Lag Bolts
14 x2
x1
13 x1
x1
15 x1
16
Washer
Hex Key
Cable Ties
x1
18
x3
17
Locking Screw
STEP 2B: CONCRETE INSTALLATIONS
Concrete Installation Kit CMK1
[NOT INCLUDED]
Lag Bolt
Concrete Anchor C2 x2
C1 x2
Contact Customer Service to inquire
about the addition hardware.
6
M4/M5 WASHER
Qty 4
M6/M8 WASHER
Qty 4
SPACER
Qty 4
M4 x 12mm SCREW
Qty 4
M8 x 20mm SCREW
Qty 4
M4 x 35mm SCREW
Qty 4
M5 x 12mm SCREW
Qty 4
M5 x 35mm SCREW
Qty 4
M8 x 35mm SCREW
Qty 4
M6 x 12mm SCREW
Qty 4 M6 x 35mm SCREW
Qty 4
M4/M5 M6
M4 x 12mm
M6 x 12mm
M4 x 35mm
M6 x 35mm
M6 x 20mm
M5 x 12mm
M6 x 12mm
M5 x 35mm
M4 x 8mm
M6 x 14mm
1/4 x 2 ½ in.
A
cm
inches
STEP 1 Attach TV Bracket to TV
These smaller hole patterns only use TV bracket 01 .
Do not use the four TV bracket extenders 02 and eight screws 03 .
75 x 75
100 x 100
01
100
75
100
75
1.1 Measure Your TV Hole Pattern 1.2 Assemble Your TV Bracket
Measure the width and height of your TV hole pattern in mm.
Record your measurements:
Determine which TV bracket configuration to use, A, B, or C
based on your TV hole pattern measurements.
75 mm = 7.5 cm = 3 in.
100 mm = 10 cm = 4 in.
200 mm = 20 cm = 7 7/8 in.
cm
inches
xHeight
Width mm mm
inch dimensions approximate
02
03
Dimensions in mm
TV Hole Pattern
Measurement
7
BC
Assemble TV bracket extenders 02 onto TV bracket 01 as illustrated.
Secure using eight screws 03 in the corner holes shown.
Assemble TV bracket extenders 02 onto TV bracket 01 as illustrated.
Secure using eight screws 03 in the corner holes shown.
200 x 200 200 x 100
01
200
200
200
100
01
02
02
02
02
02
02
02
02
03
03
Dimensions in mm Dimensions in mm
TV Hole Pattern
Measurement TV Hole Pattern
Measurement
8
M6 M8
FLAT BACK ROUND BACK CABLES
Too Short
Correct
Too Long
INSET HOLES
M4
1.3 Select TV Screw Diameter 1.4 Select TV Screw Length
If your TV has a flat back, use the shorter screws.
Spacers and longer screws are supplied to accommodate:
●irregular / round back TVs
●TVs with inset mounting holes
●extra space needed for cables
Hand thread screws into the threaded inserts
on the back of your TV to determine which
screw diameter (M4, M6 or M8) to use.
CAUTION:
Verify adequate thread
engagement with the screw or
screw/spacer combination.
-Too short will not hold the TV.
-Too long will damage the TV.
If your TV included
spacers or wall mount
adapters, see
Troubleshooting
on PAGE 19.
9
Flat Back
Round Back / Extra Space
1.5 Attach TV Bracket
Position your TV bracket configuration over your TV hole pattern - making sure the brackets are vertically centered and level.
Install using either the screw/washer (Flat Back) or screw/washer/spacer (Round Back / Extra Space)combination you selected for your TV.
IMPORTANT: Ensure TV bracket is securely fastened before moving on to the next step.
11
02
01
04
07
05
08
06
09
09
10
10
01
NOTE: For 200 x 200 or
200 x 100 hole patterns, you may
need to loosen the screws 03 to
align the bracket extenders 02 .
After bracket extenders 02 are
secured to the back of your TV,
re-tighten screws 03 .
TV Bracket Configurations Band C
(from page 7)
Configuration B Illustrated, with spacers
TV Bracket Configuration A
(from page 6)
Illustrated with spacers
10
1. Locate your stud. Verify and mark the center of the stud by finding the stud edges using an awl, a thin nail, or an edge to edge stud finder.
2. Position the wall plate template 12 at your desired height and line up the holes with your stud center line. Level the template and tape in place.
3. Drill pilot holes using a 7/32 in. (5.5 mm) diameter drill bit. Remove wall plate template 12 .
IMPORTANT: Be sure to drill into the center of the stud.
IMPORTANT: Pilot holes must be drilled to a depth of 2½ in. (63.5 mm).
THIS WAYUP
THIS WAYUP
STEP 2A Attach Wall Plate Wood Stud Installation
THIS WAY UP
THIS WAY UP
2
THIS WAYUP
THIS WAYUP
3
12 12
≤ 16 mm
(5/8 in.)
1
NOTE: TV shifts 21.9 mm (7/8 in.) to the right
or left when in the home position. Consider this when
selecting the location of your wall mount.
CAUTION: Avoid potential personal injury or property damage!
●Drywall covering the wall must not exceed 5/8 in. (16 mm)
●Minimum wood stud size: nominal 2 x 4 in. (51 x 102 mm) actual 1 ½x 3 ½in. (38 x 89 mm)
2½in. (63.5 mm)
7/32 in.
(5.5 mm)
Table des matières
Langues :
Autres manuels Sanus Support et étagère
Sanus
Sanus HTBS Manuel utilisateur
Sanus
Sanus SMF218-B8 Manuel utilisateur
Sanus
Sanus CFR518RR Manuel utilisateur
Sanus
Sanus VST4 Manuel utilisateur
Sanus
Sanus Sanus VisionMount ML22 Manuel utilisateur
Sanus
Sanus VML5 Manuel utilisateur
Sanus
Sanus VisionMount MF202 Manuel utilisateur
Sanus
Sanus BSSATM1 Manuel utilisateur
Sanus
Sanus 6901-170053 Manuel utilisateur
Sanus
Sanus VSL4 Manuel utilisateur
Sanus
Sanus BXF230 Manuel utilisateur
Sanus
Sanus VLL5 Manuel utilisateur
Sanus
Sanus WSS2 Manuel utilisateur
Sanus
Sanus VISIONMOUNT LRF118 Manuel utilisateur
Sanus
Sanus CFR2115 Manuel utilisateur
Sanus
Sanus VLF525 Manuel utilisateur
Sanus
Sanus WSEDM2 Manuel utilisateur
Sanus
Sanus VMF518 Manuel utilisateur
Sanus
Sanus VisionMount ML11 Manuel utilisateur
Sanus
Sanus VMTV Manuel utilisateur
Manuels Support et étagère populaires d'autres marques
Salamander
Salamander Acadia AC/W/L400/WH Manuel utilisateur
Fohhn
Fohhn VAT-09 Guide de l'utilisateur
ricoo
ricoo FS0522 Manuel utilisateur
AMSOIL
AMSOIL BMK-22 Guide rapide
Kargo Master
Kargo Master 48220 Manuel utilisateur
Milestone AV Technologies
Milestone AV Technologies SIMPLICITY SLF2 Manuel utilisateur
