Sanus VMF518 Manuel utilisateur
VMF
518
INSTRUCTION MANUAL
Scan for easy install video
http://san.us/406
We’ll Make It Stress-Free
If you have any questions along the way, just give us a call.
1-800-359-5520. We’re ready to help!
2
IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS – PLEASE READ ENTIRE MANUAL PRIOR TO USE
Does your TV weigh more than 75 lb (34 kg) including accessories?
No
—
Perfect!
Yes
—
This mount is NOT compatible. Visit MountFinder.Sanus.com or call 1-800-359-5520 (UK: 0800-056-2853) to find a compatible mount.
Ready to begin?
Please read through these instructions completely to be sure you’re comfortable with this easy install process. Also check your TV
owner’s manual to see if there are any special requirements for mounting your TV.
If you do not understand these instructions or have doubts about the safety of the installation, assembly or use of this product, contact
Customer Service at 1-800-359-5520 (UK: 0800-056-2853).
Do you have all of the tools needed?
Before getting started, let’s make sure this mount is perfect for you!
1
2
3
4
What is your wall made of?
Perfect! Perfect! Call 1-800-359-5520 (UK: 0800-056-2853)
Unsure?
?
Drywall with
wood studs
Solid concrete or
concrete block
5.5 mm
(7/32 in.)
Wood
10 mm
(3/8 in.)
Concrete
75 lb
(34 kg)
1/2 in.
(13 mm)
3
M6x35 mm M8x35 mm
M4x35 mm M5x35 mm
Spacer
STEP 1 Attach Bracket to TV
Horizontal TV Bracket
Vertical
TV Bracket
04
06
09
x4
x4
x4
03
05
07 08
x4 x4
x4
x4
01 x2
02 x1
NOTE: Not all hardware included will be used.
WARNING: This product contains small items that could be a choking hazard if swallowed.
Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged
item to your dealer; contact Customer Service. Never use damaged parts!
Parts and Hardware for STEP 1
TV Screws
TV Washers
4
1-1 Select TV Screws
Hand thread screws into the threaded inserts on the back of your TV
to determine which screw diameter (M4, M5, M6, or M8) to use.
1-2 Spacers
Mount the spacers 09
above the TV bracket,
so the TV bracket sits
close to the TV surface
for Flat Back Panels.
CAUTION: Verify adequate thread engagment of the screw/
spacer combination on your TV.
Too short will not hold the TV and too long will damage the TV.
M4 M6 M8
M5
Too Short Correct Too Long
Mount the spacers 09
under the TV bracket to
create extra space needed
for irregular shape TV
backs or large cables.
Spacers and screws are supplied to install your TV bracket.
Determine your preference for spacer configuration when
attaching your TV bracket.
Round Back CablesInset HolesFlat Back
TV Bracket
TV Bracket
09
09
ab
5
1-3 Attach Horizontal Bracket
1 2
01
01
02
01
01
02
1. Slide the horizontal TV brackets 01 over the ends of the vertical TV bracket 02 .
NOTE: The horizontal and vertical TV brackets must be oriented in the positions shown.
2. Position TV bracket assembly over your TV hole pattern, center horizontally and loosely install
using the spacer, screw and washer combination you selected for your TV.
Pin
aSpacer, screw and washer
bSpacer, screw and washer
09
09
03
03
04
04
05
05
06
06
07
07
08
08
6
1-4 Attach Vertical Bracket
3 6
4
5
02
Screws
01
01
01
3. Vertically center the vertical TV bracket 02 .
4. Visually line up the locator hole in the bottom horizontal TV bracket 01 with a hole in the vertical TV bracket 02 .
5. Press and turn a spring screw to secure the vertical TV bracket 02 in place. Push and tighten the remaining three spring screws.
NOTE: You may need to slide the vertical TV bracket 02 up or down while pressing in the spring screw to find the first mounting hole.
6. Tighten the 4 screws (PAGE 5) on the horizontal TV brackets 01 .
01
Spring
Screw
Spring Screw
Locator Hole
TV Bracket
Hole
02
02
7
STEP 2 Attach Arm Assembly/Wall Plate to Wall
Parts and Hardware for STEP 2
For wood stud installations, follow STEP 2A on PAGE 8
For concrete installations, follow STEP 2B on PAGE 12
NOTE: Not all hardware included will be used.
WARNING: This product contains small items that could be a choking hazard if swallowed.
Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged
item to your dealer; contact Customer Service. Never use damaged parts!
5⁄16 x 3 ½ in.
Sanus Magnetic Stud Finder
13 x2
10 x1 11 x1
12 x1
14 x2
Arm Assembly/Wall Plate
Wall Plate
Template
Lag Bolts
Concrete Anchors
8
1
2
3
CAUTION: Avoid potential personal injuries and property damage!
●Drywall covering the wall must not exceed
16 mm (5/8 in.)
●Minimum wood stud size: common 51 x 102 mm (2 x 4 in.) nominal
38 x 89 mm (1½ x 3½ in.)
●Stud center must be verified
NOTE: See Introducing Sanus Magnetic Stud Finder*located
in your Welcome folder for more detailed operation of stud finder.
1. Locate a nail/screw in the stud using the Sanus magnetic stud finder
12 provided.
2. Find the edges of the stud using the probe
of the stud finder 12 .
3. Mark the center of the stud with pencil.
*WARNING:This product contains a magnet. If an implanted medical device such as a pacemaker or implantable cardioverter defibrillator (ICD)
is in use, magnetic fields may aect the operation of those devices, resulting in serious injury or death. If you have an implanted medical device, keep at
least 13 cm (5 in.) between your device and the magnet. Please consult with your physician or medical professional prior to using this product.
Min. 38 mm
(1 1/2 in.)
12
STEP 2A Wood Stud Option
Min. 89 mm
(3 1/2 in.)
Max. 16 mm
(5/8 in.)
9
4 5 6
89 mm
(3½ in.)
5.5 mm
(7/32 in.)
4. Place the wall plate template 10 at your desired height and position the slotted holes over your stud center line. Level the wall plate
template 10 and tape in place.
NOTE: For assistance in determining wall plate location, see HeightFinder at sanus.com.
IMPORTANT: Be sure you mark and drill into the center of the stud.
5. Drill the two pilot holes using a 5.5 mm (7/32 in.) diameter drill bit.
IMPORTANT: Pilot holes must be drilled to a depth of 89 mm (3 ½ in.).
6. Partially install the top lag bolt 13 ,leaving about 13 mm (1/2 in.) space from the wall.
NOTE: This space allows you to remove the wall plate template 10 and hang the wall plate 11 onto the top lag bolt 13 .
10
10
≈ 13 mm
(1/2 in.)
10
13
10
7. Remove the wall plate template 10 .
8. Remove the covers on the arm assembly/wall plate 11 .
9. Hang the arm assembly/wall plate 11 on the top lag bolt 13 .
7 8 9
Cover
Cover
11
11
10
13
Autres manuels pour VMF518
2
Table des matières
Autres manuels Sanus Support et étagère
Sanus
Sanus VML5 Manuel utilisateur
Sanus
Sanus SAN18B Manuel utilisateur
Sanus
Sanus Sonos Beam WSSBM1-B2 Manuel utilisateur
Sanus
Sanus SA405 Manuel utilisateur
Sanus
Sanus VSL4 Manuel utilisateur
Sanus
Sanus VM300 Manuel utilisateur
Sanus
Sanus A701 Manuel utilisateur
Sanus
Sanus VisionMount VMF220 Manuel utilisateur
Sanus
Sanus WSS22 Manuel utilisateur
Sanus
Sanus VLL10 Manuel utilisateur
Sanus
Sanus OLF24-B2 Manuel utilisateur
Sanus
Sanus VF3012 Manuel utilisateur
Sanus
Sanus Trillium 53 Manuel utilisateur
Sanus
Sanus VisionMount VMPR1 Manuel utilisateur
Sanus
Sanus SASB1 Manuel utilisateur
Sanus
Sanus VISIONMOUNT LRF118 Manuel utilisateur
Sanus
Sanus SLT3 Manuel utilisateur
Sanus
Sanus ALF109 Manuel utilisateur
Sanus
Sanus LL22 Manuel utilisateur
Sanus
Sanus WSSMM1 Manuel utilisateur
Manuels Support et étagère populaires d'autres marques
Salamander
Salamander Acadia AC/W/L400/WH Manuel utilisateur
Fohhn
Fohhn VAT-09 Guide de l'utilisateur
ricoo
ricoo FS0522 Manuel utilisateur
AMSOIL
AMSOIL BMK-22 Guide rapide
Kargo Master
Kargo Master 48220 Manuel utilisateur
Milestone AV Technologies
Milestone AV Technologies SIMPLICITY SLF2 Manuel utilisateur
