Ruijie RG-IS2712G Manuel d'installation et d'exploitation

RG-IS2700G Series Switch

Hardware Installation and Reference Guide V1.12

Ruijie Networks reserves all copyrights of this document. Any reproduction, excerption, backup, modification,

transmission, translation or commercial use of this document or any portion of this document, in any form or by any means,

without the prior written consent of Ruijie Networks is prohibited.

Exemption Statement

This document is provided “as is”. The contents of this document are subject to change without any notice. Please obtain

the latest information through the Ruijie Networks website. Ruijie Networks endeavors to ensure content accuracy and will

not shoulder any responsibility for losses and damages caused due to content omissions, inaccuracies or errors.

Preface

Thank you for using our products. This manual will guide you through the installation of the device.

This manual describes the functional and physical features and provides the device installation steps, hardware

troubleshooting, module technical specifications, and specifications and usage guidelines for cables and connectors.

Audience

It is intended for the users who have some experience in installing and maintaining network hardware. At the same time, it

is assumed that the users are already familiar with the related terms and concepts.

Obtaining Technical Assistance

Ruijie Networks Website: http://www.ruijienetworks.com/

Service Email: [email protected]

Technical Support: http://www.ruijienetworks.com/service.aspx

Technical Support Hotline: +86-4008-111-000

Related Documents

Documents

Description

Configuration Guide

Describes network protocols and related mechanisms that supported by the

product, with configuration examples.

Command Reference

Describes the related configuration commands, including command modes,

parameter descriptions, usage guides, and related examples.

Symbol Conventions

Means reader take note. Notes contain helpful suggestions or references.

Means reader be careful. In this situation, you might do something that could result in equipment damage or loss of

data.

RG-IS2700G Series Switch Hardware Installation and Reference Guide

1 Product Overview

The RG-IS2700G series switches are the next generation layer-2 switches launched by Ruijie Networks. Integrated with

high performance, high security and multiple services, the RG-IS2700G series switches are mainly deployed in the

scenario of outdoor weak batter cases or on the wall with the DIN rail mounted to provide full line-rate layer-2 switching

and complete QoS policies, and to ensure the undelayed transmission of key data by applying different traffic

classification rules to different applications. RG-IS2700G is shipped with brackets for wall mounting.

Table 1-1 RG-IS2700G series

Model

10/100/1000Base-T adaptive

Ethernet port

1000Base-X SFP

port

Console port

RG-IS2712G

RG-IS2706G

1.1 RG-IS2712G

Technical Specifications

Table 1-2 Technical specifications of the RG-IS2712G Switches

Model

RG-IS2712G

Module Type

Gigabit Ethernet:

MINI-GBIC-SX-MM850

MINI-GBIC-LX-SM1310

MINI-GBIC-LH40-SM1310

MINI-GBIC-ZX50-SM1550

MINI-GBIC-ZX80-SM1550

MINI-GBIC-ZX100-SM1550

GE-SFP-LX20-SM1310-BIDI

GE-SFP-LX20-SM1550-BIDI

GE-SFP-LH40-SM1310-BIDI

GE-SFP-LH40-SM1550-BIDI

1000Base-T:

Mini-GBIC-GT

SFP module, supporting 2.5Gbps bandwidth and VSU deployment:

GE-SFP-STACK1.6M

The supported module type may change at any time. Contact us for the detailed

change information.

BIDI optic modules must be used in pairs. If GE-SFP-LX20-SM1310-BIDI is used at

one end, then GE-SFP-LX20-SM1550-BIDI must be applied to the other end. Please

RG-IS2700G Series Switch Hardware Installation and Reference Guide

refer to AppendixB for BIDI optic module details.

SFP Port

Supporting 1000Base-X;

Supporting 2.5Gbps bandwidth, and VSU deployment

Power Supply

AC input:

Rated voltage range: 100VAC to 240VAC

Maximum voltage range: 85VAC to 265VAC

Frequency: 50Hz to 60Hz

Rated current: 0.4A

HVDC input:

Rated voltage range: 140VDC to 340VDC

Maximum voltage range: 130VDC to 370VDC

Rated current: 0.4A

Power Consumption

Max.12 W

Operating Temperature

-40ºC to 85ºC

Storage Temperature

-40ºC to 85ºC

Operating Humidity

10% to 90% RH (non condensing)

Storage Humidity

10% to 90% RH (non condensing)

Fan

Fanless

Temperature Warning

Support

IP Rating

IP40

EMI

GB 9254-2008,FCC Part 15, CISPR (EN55022) class A,

EMS

IEC/EN 61000-4-2 ESD

Contact Discharge: 8 kV

Air Discharge: 15 kV

IEC/EN 61000-4-3 RS

80-1,000 MHz 10V/m

1,400-2,000 MHz 3V/m

2,000-2,700 MHz 1V/m

IEC/EN 61000-4-4 EFT

Power cable 2 kV

Data cable 1 kV

RG-IS2700G Series Switch Hardware Installation and Reference Guide

IEC/EN 61000-4-6 CS

15kHz-80 MHz 10V

IEC/EN 61000-4-8 PFMF

50Hz 30A/m

IEC/EN 61000-4-5 Surge

Power cable, L/N 2kV

Power cable, L-PE/N-PE 6kV

Data cable 6kV

IEC/EN 61000-4-11 DIP

AC220V CLASS 3

AC110V CLASS 3

Security Compliance

GB4943-2001

Dimensions (W x D x H)

160 mm x 115 mm x 52 mm

Weight

1 kg

RG-IS2712G switch is a class A product. In a domestic environment, this product may cause radio interference in

which case the user may be required to take adequate measures.

Product Appearance

The front panel of the RG-IS2712G Ethernet switch provides eight 10/100/1000Base-T Ethernet ports, four Gigabit SFP

fiber ports and one Console port. The back panel provides AC power input ports. Figure 1-1 shows the appearance of the

RG-IS2712G.

Figure 1-1 Appearance of the RG-IS2712G

RG-IS2700G Series Switch Hardware Installation and Reference Guide

Front Panel

Figure 1-2 RG-IS2712G Front Panel

RG-IS2700G Series Switch Hardware Installation and Reference Guide

Note

1. Switch status indicator

2. Reset button

3. Console port

4. 10/100/1000Base-T adaptive Ethernet

port indicator

5. 10/100/1000Base-T adaptive Ethernet port

6. 1000Base-X SFP port/2.5 G stack port

7. 1000Base-X SFP port indicator

8. Power interface

Side panel

Figure 1-3 RG-IS2712G Side Panel

Note

1. 6-pin AC power connector

2. Grounding pole

3. Warning Label for high temperature and electric shock

Back panel

Figure 1-4 RG-IS2712G Back Panel

RG-IS2700G Series Switch Hardware Installation and Reference Guide

Note

1. Product information label

2. Device bar code

3. DIN slot

4. Network access license of the device

5. MAC address of the device

6. Tips for software preinstallation

Power Supply

The RG-IS2712G switch adopts the AC power input.

AC input:

Rated voltage range: 100 VAC to 240 VAC

Maximum voltage range: 85 VAC to 265 VAC

Frequency: 50 Hz to 60 Hz

RG-IS2700G Series Switch Hardware Installation and Reference Guide

Rated current: 0.4 A

Power cord specification: 10 A power cord

Heat Dissipation

The RG-IS2712G switch is designed with no fans. To ensure good dissipation, sufficient ventilation space (10 cm distance

from both sides and the back panel of the chassis) should be reserved to avoid the air inlet of the chassis from being

blocked; otherwise, the dissipation might be affected.

LED Indicators

Indicator

Faceplate

Marker

Status

Meaning

Status indicator

Status

Off

The switch is not powered on.

Blinking green

The switch is being initialized. If the blinking

persists, however, it indicates that an

abnormality occurs.

Solid green

The switch is operational.

Solid yellow

It indicates a warning on the switch temperature.

Check the working environment of the switch

immediately.

Solid red

Indicates a fault on the switch. For details, refer

to Section of Troubleshooting Common

Faults.

RJ-45 port indicator

1~8

Off

No link, or port was administratively shut down.

Solid green

Link present.

Blinking green

Activity. The port is receiving or sending data.

SFP port indicator

9F-12F

Off

No link, or port was administratively shut down.

Solid green

Link present.

Blinking green

Activity. The port is receiving or sending data.

1.2 RG-IS2706G

Technical specifications

Table 1-3 Technical specifications of the RG-IS2706G Switches

Model

RG-IS2706G

Module Type

Gigabit Ethernet:

MINI-GBIC-SX-MM850

MINI-GBIC-LX-SM1310

MINI-GBIC-LH40-SM1310

MINI-GBIC-ZX50-SM1550

MINI-GBIC-ZX80-SM1550

MINI-GBIC-ZX100-SM1550

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Ruijie Changer

Ruijie

Ruijie RG-S5750-H Series Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-S6580-24DC8QC Manuel d'installation et d'exploitation

Ruijie

Ruijie S5750 Series Manuel utilisateur

Ruijie

Ruijie RG-S3760E Series Manuel utilisateur

Ruijie

Ruijie Reyee RG-ES106D-P V2 Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-S6510-4C Series Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-S2928G-E Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-S5000-24GT4MS-E Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-ES200 Series Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-S6000C-48GT4XS-E-AC DCN Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-IS2700-P Series Manuel d'installation

Ruijie

Ruijie XS-S1930J Series Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-ES100 Series Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-S6150-X Series Comment utiliser

Ruijie

Ruijie RG-S6930-2C Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-NBS3200 Series Manuel d'installation et d'exploitation

Ruijie

Ruijie HS2310-16GH2GT1XS Manuel d'installation et d'exploitation

Ruijie

Ruijie Reyee RG-NIS Series Manuel utilisateur

Ruijie

Ruijie RG-S2900 Series Manuel utilisateur

Ruijie

Ruijie RG-NBS1805C-P Manuel utilisateur

Ruijie

Ruijie RG-S6580-48CQ8QC Manuel d'installation et d'exploitation

Ruijie

Ruijie Reyee RG-NBS6002 Manuel d'installation et d'exploitation

Ruijie

Ruijie RGOS 11.X Manuel utilisateur

Ruijie

Ruijie RG-S6110 Series Manuel d'installation et d'exploitation

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Manuel utilisateur