Ruijie RG-CS88-08 Series Manuel d'installation et d'exploitation

Ruijie RG-CS88-08 Series Switches

Hardware Installation and Reference Guide

Document Version: V1.1

Date: 2023.06.07

All rights are reserved in this document and this statement.

Any reproduction, excerption, backup, modification, transmission, translation or commercial use of this document

or any portion of this document, in any form or by any means, without the prior written consent of Ruijie Networks

is prohibited.

Trademark and are owned by Ruijie Networks.

All other trademarks or registered trademarks mentioned in this document are owned by their respective owners.

Disclaimer

The products, services, or features you purchase are subject to commercial contracts and terms. Some or all of

the products, services or features described in this document may not be within the scope of your purchase or

use. Unless otherwise agreed in the contract, Ruijie Networks does not make any express or implied statement

or guarantee for the content of this document.

Due to product version upgrades or other reasons, the content of this document will be updated from time to

time. Ruijie Networks reserves the right to modify the content of the document without any notice or prompt.

This manual is for reference only. Ruijie Networks endeavors to ensure content accuracy and will not shoulder

any responsibility for losses and damages caused due to content omissions, inaccuracies or errors.

Preface

Intended Audience

This document is intended for:

Network engineers

Technical support and servicing engineers

Network administrators

Technical Support

Ruijie Networks Website: https://www.ruijienetworks.com/

Technical Support Website: https://ruijienetworks.com/support

Case Portal: https://caseportal.ruijienetworks.com

Community: https://community.ruijienetworks.com

Technical Support Email: s[email protected]

Skype: [email protected]

Conventions

1. Conversions

Convention

Description

Bold font

Commands, command options, and keywords are in bold font.

Italic font

Arguments for which you supply values are in italic font.

[ ]

Elements in square brackets are optional.

{ x | y | z }

Alternative keywords are grouped in braces and separated by

vertical bars.

[ x | y | z ]

Optional alternative keywords are grouped in brackets and

separated by vertical bars.

&<1-n>

The argument before the sign (&) can be input for consecutive 1- n

times.

Double slashes at the beginning of a line of code indicate a

comment line.

2. Signs

The signs used in this document are described as follows:

Warning

An alert that calls attention to important rules and information that if not understood or followed can result in

data loss or equipment damage.

Caution

An alert that calls attention to essential information that if not understood or followed can result in function

failure or performance degradation.

Note

An alert that contains additional or supplementary information that if not understood or followed will not lead to

serious consequences.

Specification

An alert that contains a description of product or version support.

3. Note

The manual offers configuration information (including model, port type and command line interface) for

indicative purpose only. In case of any discrepancy or inconsistency between the manual and the actual version,

the actual version prevails.

Hardware Installation and Reference Guide Product Overview

1 Product Overview

Launched by Ruijie independently, RG-CS88-08 series next generation core switches adopt the Crossbar/FullMesh/Clos

architecture and support dual supervisor modules and power supply redundancy.

Specifications

Model

RG-CS88-08

Module Slot

two supervisor module slots and six service module slots

Supervisor Module

CM88-CM

Supervisor Module

Redundancy

Supported

Service Module

CM88-CM supports the following 4 modules:

CM88-48GT-H

CM88-48SFP-H

CM88-48XS-H

CM88-8CQ-H

Hot Swapping

Supported

Power Supply

Module

RG-PA600I-F: 90-180 V~ power: 600 W;

180-264 V~ power: 600 W

RG-PA1600I-F: 90-180 V~ power: 1200 W;

180-264 V~ power: 1600 W

Power Supply

Redundancy

The power supply redundancy of the same model is supported

Fan Module

M08-FAN

EMC Standards

GB/T 9254.1

Safety Standards

GB 4943.1

Altitude

Long term operation height: 3000m at 50℃. The temperature decreases by 1℃as the altitude

ranging from 3000m to 5000m increases by 200 m.

Operation height: 5000 m max

Storage height: 5000 m max

Operating

Temperature

0°C to 50°C

Storage

Temperature

-40°C to 70°C

Operating Humidity

10% to 90% RH (non-condensing)

MTBF

216,000 hours

Noise

70 dB at normal temperature

Max Noise: 77dB

Weight

Net weight: 35.6 kg

Dimensions

(W x D x H)

442 mm x 465 mm x 441.7 mm (without cable management brackets), 10U

The weight only includes that of the empty chassis and fans. The whole device's weight is subject to that of the

modules selected.

RG-CS88-08 switch is a class A product. In a domestic environment, this product may cause radio interference in

which case the user may be required to take adequate measures.

Product Appearance

The hardware system of the RG-CS88-08 switch is composed of the chassis, the power system, modules and the cooling

system.

The power system provides four power supply slots and supports N+N power redundancy.

The RG-CS88-08 switch provides two supervisor module slots and six service module slots. The supervisor modules

support 1+1 redundancy. Users are recommended to configure redundancy for the supervisor modules. Users may

choose different service modules as needed.

Hardware Installation and Reference Guide Product Overview

The cooling system is composed of the fan trays and air filters. Fan trays are at the back of the chassis. The air filters

are on the right side of the chassis.

Figure 1-1 Appearance of the RG-CS88-08 Switch

Front Panel

The front panel of the RG-CS88-08 switch is shown in Figure 1-2.

Figure 1-2 Front Panel of the RG-CS88-08 Switch

Note:

1. Supervisor module slots

2. Service module slots

3. Cable management bracket

4. Slot for system power supply module

5. Anti-static wrist strap socket

Ensure the supervisor module, service module, and power supply module are removed from the chassis before you

move or transport the RG-CS88-08 chassis.

Back Panel

Hardware Installation and Reference Guide Product Overview

The back panel of the RG-CS88-08 switch is shown in Figure 1-3.

Figure 1-3 Back Panel of the RG-CS88-08 Switch

Note:

1. PoE power supply slots

2. Direction sign for installing air filter

3. Captive screw of the air filter

4. Air filter module

5. Fan Tray

6. Handle of the fan tray

7. Captive screws of the fan tray

Power supply

The RG-CS88-08 switch adopts both AC power supply input.

AC power supply input: The RG-PA1600I-F and the RG-PA600I-F power supply modules are supported. The two

types of power supply modules support power management. The supervisor module of the RG-CS88-08 switch can

read the power supply information and implement flexible and intelligent power management.

The RG-CS88-08 switch supports N+N power supply redundancy to improve the system stability and reliability. We

recommend users to configure N+M redundancy for power supply modules.

Heat Dissipation System

The operating environment temperature of the RG-CS88-08 switch ranges between 0 and 50°C . The thermal design must

satisfy the requirement on the device's reliability in the temperature range while ensuring the device's safety and

maintainability. According to the thermal design of the RG-CS88-08 switch, fans are used to draw air for forced convection

cooling in order to ensure that the device works properly in the specified environment.

Figure 1-4 Ventilation and Heat Dissipation System of the RG-CS88-08 Switch (Air Intakes)

Hardware Installation and Reference Guide Product Overview

Note:

1. Air intakes for PoE power modules

2. Air intakes for service and supervisor modules

3. Air intakes for system power modules

Figure 1-5 Ventilation and Heat Dissipation System of the RG-CS88-08 Switch (Exhaust Vents)

Note:

1. Exhaust vents for PoE power modules

2. Exhaust vents for service and supervisor

modules

3. Exhaust vents for system power modules

For the PoE power supply modules, air flows across the chassis from the back intakes to the front vents.

For the supervisor and service modules, air flows across the chassis from the right intakes to the back vents.

For the power supply modules, air flows in from the front intakes and out from the back vents.

The chassis should be mounted in a place with sufficient space for air circulation. Maintain a minimum clearance of

10cm around the chassis.

Hardware Installation and Reference Guide Module

If any module slot is unoccupied, install a filler panel to ensure proper airflow.

2 Module

The RG-CS88-08 switch adopts the module-based design. Compliant with industry standards, the design divides modules

and integrates module interfaces to ensure the switch system's functioning and independence of various function modules.

The modules of the RG-CS88-08 switch provide 10/100/1000M auto-sensing Ethernet copper ports, 1000 Mbps/100 Mbps

SFP (single-mode/multi-mode) optical fiber interfaces and 10G/40G optical fiber interfaces.

2.1 RGOS12.X Modules

2.1.1 RGOS12.X Supervisor Modules

2.1.1.1 CM88-CM

CM88-CM is the supervisor module of the RG-CS88-08 series switches and is designed with management and switching

functions.

Module Appearance

Figure 2-11 Appearance of the CM88-CM Module

External Port

The CM88-CM module provides three external ports:

Universal Serial Bus (USB) port: By connecting to the USB port, the USB storage devices can store logs, host version,

alarms and other diagnosis information, facilitating online upgrade of switch software and storage of logs.

To secure data and prevent damage to the device, it is recommended to use high-quality flash disks produced by

reliable manufacturers. The USB port is compatible with most USB controllers but may be unable to identify some

USB disk models.

Console port: As a serial communications port, it uses the RS-232 interface level and standard RJ-45 connector. This

port is used to connect the device to serial ports of background terminal computers to perform tasks including system

commissioning, configuration, maintenance, management, and host software loading.

10/100/1000M MGMT port: As the 10/100/1000BASE-T Ethernet port, it uses the RJ-45 connector. This port can be

used to connect the device to the Ethernet port of the background computer to load programs. Use the standard cable

to connect the device to the Ethernet port of the background computer.

Button

The CM88-CM module provides a FUNC button, which is used to reset the system. If the button is held for less than five

seconds, it is a short press; if the button is held for five seconds or longer, it is a long press.

In case of a short press, the Status LED flashes in green, and the device resets within five seconds after the press.

In case of a long press, the Status LED flashes in green and then flashes in red; the device resets within five seconds

after the press.

Press the button, and the system starts to collect information, during which the device will not restart. After the

collection is complete, the device restarts automatically. Hold the button for a while and release it, the device restarts

automatically in five seconds.

LED

Identification

on the panel

Status

Meaning

System LED

Status

Off

The module is powered off.

Solid red

The module is faulty.

Blinking green

Initialization is in progress. Continuous blinking indicates

errors.

Hardware Installation and Reference Guide Module

Solid green

The module is operational.

Active/standby supervisor

module LED

Primary

Off

The module acts as the standby supervisor module.

Solid green

The module acts as the primary supervisor module.

Alarm LED

Alarm

Off

No fault

Solid red

The whole system or a module fails to work. The device

may be damaged if it continues operating.

Solid yellow

The temperature exceeds the threshold but the system

continues operating.

Fan status LED

FAN

Solid green

The fan is operational.

Solid yellow

The fan is NOT in the position.

Solid red

The fan is faulty.

Power status LED

PWR

Off

The power supply module is NOT in the position.

Solid green

The power supply module is operational.

Solid red

The power supply module is faulty.

MGMT port LED

MGMT

Off

The MGMT port is NOT connected.

Green

The MGMT port is connected at 1000Mbps.

Yellow

The MGMT port is connected at 10/100Mbps.

Blinking

The MGMT port is transmitting or receiving data.

Specifications

Model

CM88-CM

CPU

Quad-core CPU, each core with the clock speed of 1.5G

BOOTROM

16 MB

Flash Memory

8 GB

SDRAM

DDR4 4GB

External Port

One Console port

One 10/100/1000M MGMT port

Two USB ports

Button

FUNC button

Power Consumption

< 50 W

Hot Swapping

Supported

Management

Redundancy

Supported

EMC Standards

GB9254-2008 CLASS A

Safety Standards

GB4943-2011

Operating

Temperature

0°C to 50°C

Storage

Temperature

-40°C to 70°C

Operating Humidity

10% to 90% RH (non-condensing)

MTBF

960,000 hours

Weight

Net weight: 2.1 kg

Dimensions

(W x D x H)

438.5 mm x 309.0 mm x 40.1 mm

The CM88-CM adopts the CR2032 lithium battery. The device may explode if a wrong battery model is used. Used

batteries should be properly disposed of.

2.1.2 RGOS12.X Service Modules

2.1.2.1 CM88-48GT-H

Module Appearance

Figure 2-22 Appearance of the CM88-48GT-H

Table des matières

Autres manuels Ruijie Changer

Ruijie

Ruijie RG-NBS3100 Series Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-NIS3100 Series Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-S29 Series Manuel d'installation

Ruijie

Ruijie RG-S6580-48CQ8QC Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-ES05 Series Manuel utilisateur

Ruijie

Ruijie RG-S5750-E Series Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-S6220-H Series Manuel utilisateur

Ruijie

Ruijie RG-CS85 Series Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-SF2920U Series Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-S2928G-E Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-CS86-20XS Series Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-S7600 Series Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-S6110 Series Manuel d'installation et d'exploitation

Ruijie

Ruijie XS-S1960-24GT4SFP-UP-H Series Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-NIS3100 Series Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-S6000C-48GT4XS-E Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-N18000-X Series Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-IF2920U-12GT1XS-DC Series Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-S6120 Series Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-S2600E Series Manuel utilisateur

Ruijie

Ruijie RG-N18000-XH Series Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-S2924GT/8SFP-XS-P Manuel utilisateur

Ruijie

Ruijie Reyee RG-ES105D Series Manuel d'installation et d'exploitation

Ruijie

Ruijie RG-ES100 Series Manuel d'installation et d'exploitation

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Manuel utilisateur