Rigol DS Series Guide de démarrage rapide

DS Series products Firmware Upgrade Procedure

Date: 11.26.2013

Solution:

System requirements:

IBM compatible PC

WINRAR software

An SB (flash) drive

Important

- If you choose to perform an upgrade and your unit is damaged, Rigol is not responsible

for the repair or shipping costs. The ser assumes all responsibility.

- Before the upgrade, please contact RIGOL Technical and Support Department to confirm

whether the current firmware version can be upgraded to the target version.

- There is no firmware upgrade available if you current firmware version is below 02.04.

Doing an update despite you have a lower version will damage your Scope seriously.

Pre-requisites

Verify the SB (flash) drive that can be recognized by a Rigol oscilloscope (e.g. DS1102E) as

follows:

• When the oscilloscope is powered up, insert the SB drive (WITHO T update file) into the

SB (Host) port which is located in the front of the oscilloscope.

• When it prompts “ SB device install success”, it indicates the flash drive is recognized by the

scope, as shown in Figure 1.

• Otherwise the SB drive is not compatible with the oscilloscope Note 1.

DS1000 Upgrade Steps

1. With the help of your computer, decompress the upgrade software (RAR) files and place them

in the top directory of the SB drive.

2. Inserts the flash into the SB (Host) port of the oscilloscope, and it will

• Prompt “examine the higher/lower-version software, upgrade or not?”

• Choose “OK” to activate the automatic installment process, as shown in Figure 2.

3. Important

During the installation process, please do not disturb or remove the SB drive, and make sure

the power supply is stable; otherwise, it may corrupt the firmware and cause the oscilloscope to

be unusable, and require factory supportNote 2.

4. When the upgrade is completed, the machine will automatically restart, please perform the

self-calibration. (Please refer to the user manual for the self-calibration procedure).

NOTE:

1. Brand, and memory size dependent, not all SB drives in the market are compatible with

Rigol products.

2. Service charges may be required, regardless of validity of warranty, if upgrade is not an

necessity of bugs, application failure, system feature malfunctioning.

Headquarters

RIGOL TECHNOLOGIES, INC.

No.156,Cai He Village,

Sha He Town,

Chang Ping District, Beijing,

102206 P.R.China

Tel:+86-10-80706688

Fax:+86-10-80705070

Email: [email protected]

USA

RIGOL TECHNOLOGIES, SA INC.

7401 First Place, Suite N

Oakwood Village

OH 44164, SA

Toll free: 877-4-RIGOL-1

Office: (440) 232-4488

Fax: (216)-754-8107

Email: [email protected]

EUROPE

RIGOL TECHNOLOGIES GmbH

Lindbergh str. 4

82178 Puchheim

Germany

Tel: 0049- 89/89418950

Email: [email protected]

Table des matières

Autres manuels Rigol Instrument de mesure

Rigol

Rigol RSA5000 Series Manuel d'installation et d'exploitation

Rigol

Rigol DS1000CA series Manuel utilisateur

Rigol

Rigol MSO1000Z series Manuel utilisateur

Rigol

Rigol DSA700 series Manuel utilisateur

Rigol

Rigol DSA800 Series Manuel utilisateur

Rigol

Rigol RP1002C Manuel utilisateur

Rigol

Rigol DS1102Z-E Manuel utilisateur

Rigol

Rigol DS1000E Series, DS1000D Series Mode d'emploi

Rigol

Rigol MSO8000 Series Manuel utilisateur

Rigol

Rigol DM3058 Manuel utilisateur

Rigol

Rigol DSA700 series Manuel utilisateur

Rigol

Rigol DSA815 Manuel utilisateur

Rigol

Rigol RSA3000 Series Manuel d'installation et d'exploitation

Rigol

Rigol PHA0150 Manuel utilisateur

Rigol

Rigol DS6000 Series Instructions d'installation et d'utilisation

Rigol

Rigol RSA3000E Series Manuel utilisateur

Rigol

Rigol PCA1500 Manuel utilisateur

Rigol

Rigol RSA Series Manuel utilisateur

Rigol

Rigol DL3032 Manuel utilisateur

Rigol

Rigol RSA3030-TG Manuel utilisateur

Rigol

Rigol RPL1116 Manuel utilisateur

Rigol

Rigol DSA800E Series Manuel utilisateur

Rigol

Rigol RSA5000-VNA Manuel utilisateur

Rigol

Rigol DSA1000 Series Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur