Rigol DS6000 Series Instructions d'installation et d'utilisation

RIGOL TECHNOLOGIES USA INC

877-4-RIGOL-1 How-To Guide

info@rigol.com

www.rigolna.com

Rigol DS6000

Application Note

Application Notes

Comparison Guides

FAQs

How-To Guides

Programming Manuals

Quick Start Guides

Support Information

User’s Guides

RIGOL TECHNOLOGIES USA INC

877-4-RIGOL-1 How-To Guide

[email protected]

www.rigolna.com

Measuring Video Signals with the DS6000:

Video signals naturally are challenging to properly display on a digital storage

oscilloscope’s screen. This makes such signals a perfect example for the

purpose of demonstrating the capabilities of the Rigol DS6000.

In this section we are going to demonstrate the rich features and capabilities

of the DS6000 by analyzing with it an NTSC video signal.

1- Connect the NTSC video signal to channel 1 of the DS6000. Ensure that

the video signal is ON and then press the green “Auto” button. The

resultant signal waveform will appear as below:

RIGOL TECHNOLOGIES USA INC

877-4-RIGOL-1 How-To Guide

[email protected]

www.rigolna.com

2- Then press the horizontal scale button in order to enable delayed sweep

feature of the DS6000. One can notice the extensive level of detail of the

captured signal by increasing the signal zoom by turning the horizontal

scale knob.

RIGOL TECHNOLOGIES USA INC

877-4-RIGOL-1 How-To Guide

[email protected]

www.rigolna.com

RIGOL TECHNOLOGIES USA INC

877-4-RIGOL-1 How-To Guide

[email protected]

www.rigolna.com

RIGOL TECHNOLOGIES USA INC

877-4-RIGOL-1 How-To Guide

[email protected]

www.rigolna.com

RIGOL TECHNOLOGIES USA INC

877-4-RIGOL-1 How-To Guide

[email protected]

www.rigolna.com

Capturing Signal Glitches using the DS6000:

The Rigol DS6000 series family features a 120,000 waveforms a second

update rate. This is a serious advantage when examining signals for absolute

integrity.

Determining a signal’s lack of anomalies is not always an easy task. Especially

if an anomaly like a glitch for instance occurs within a very short time period

and is beyond the equipment’s capability to be captured; for this purpose,

this Glitch capturing experiment is a very good demonstration of the

performance capabilities of the DS6000 series.

For the purpose of the demonstration, we will input a square wave signal into

the DS6000 input, however a glitch signal will be introduced randomly as well.

The glitch lasts less than 30ns on the input side.

RIGOL TECHNOLOGIES USA INC

877-4-RIGOL-1 How-To Guide

[email protected]

www.rigolna.com

The image below is of the square wave signal described above:

The glitch signal is intermittent and appears for much less than a second on

the screen before it disappears. For the purpose of making it more visible in

this tutorial, we will turn display persistence on. To accomplish that, press

“Display” button, in the display menu, then set “Persis.Time” to 200ms

Additionally, to display all of the measurable wave characteristics, we press

the “MEAS” button, and then press the “Display All” soft button on the

MEASURE right hand side menu. Also for the purpose of measuring the

wave’s frequency, the frequency-counter is enabled.

RIGOL TECHNOLOGIES USA INC

877-4-RIGOL-1 How-To Guide

[email protected]

www.rigolna.com

As we can observe from the snapshot above, the DS6000 proves capable of

capturing the signal glitch due to its high waveform update rate and its high

resolution capabilities are reflected in the accuracy of the signal –glitch

capture as observed.

RIGOL TECHNOLOGIES USA INC

877-4-RIGOL-1 How-To Guide

[email protected]

www.rigolna.com

Capturing Amplitude Modulation Glitch using the DS6000:

In this experiment we use the D6000 to measure an amplitude modulated

signal as seen below:

However, deep within this signal is a glitch. The glitch is very hard to find and

can only be spotted utilizing the DS6000 UltraVision zoom technology.

Connect the Channel 1 to the AM pin and Channel 2 to the Sync pin.

Press the “AUTO” button. Remove Channel 2 from the screen by pressing

“CH2” button repetitively.

We then proceed to show the envelope of the wave by adjusting the

Autres manuels pour DS6000 Series

Table des matières

Autres manuels Rigol Instrument de mesure

Rigol

Rigol RSA5065 Manuel utilisateur

Rigol

Rigol RSA5065N-OCXO Manuel utilisateur

Rigol

Rigol PLA2216 Manuel utilisateur

Rigol

Rigol DSG3030-IQ Manuel utilisateur

Rigol

Rigol RP1003C Manuel utilisateur

Rigol

Rigol PHA2150 Manuel utilisateur

Rigol

Rigol DS1000E Series, DS1000D Series Mode d'emploi

Rigol

Rigol DSA1030A series Manuel utilisateur

Rigol

Rigol DM3058 Manuel utilisateur

Rigol

Rigol DS1000CA series Manuel utilisateur

Rigol

Rigol DSA1000A Series Mode d'emploi

Rigol

Rigol DSA1000 Series Mode d'emploi

Rigol

Rigol DS1000U Series Manuel utilisateur

Rigol

Rigol DSA800 Series Manuel utilisateur

Rigol

Rigol RSA3000 Series Manuel d'installation et d'exploitation

Rigol

Rigol RSA3030 Manuel utilisateur

Rigol

Rigol DSA700 series Manuel utilisateur

Rigol

Rigol DP821A Manuel utilisateur

Rigol

Rigol DSA1000 Series Manuel utilisateur

Rigol

Rigol M300 Series Manuel utilisateur

Rigol

Rigol RP1002C Manuel utilisateur

Rigol

Rigol RP1003C Manuel utilisateur

Rigol

Rigol DSA1000 Series Manuel d'installation et d'exploitation

Rigol

Rigol DSA800 Series Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur