Pickering 4 890 Series Manuel utilisateur

pickeringtest.com Issue D, November 2023

PXI/PXIe Flexible Microwave Module

PRELIMINARYPRELIMINARY

4x-890 User Manual

Page (ii)

No part of this publication may be reproduced, transmitted, transcribed, translated or stored in any form, or by any

means without the written permission of Pickering Interfaces.

Technical details contained within this publication are subject to change without notice.

FM38792

Page (iii)

Worldwide Technical Support and Product Information

Pickering Interfaces Headquarters

Stephenson Road, Clacton-on-Sea, CO15 4NL United Kingdom

Tel: +44 (0)1255-687900

e-mail: [email protected]

USA

Tel: (West) +1 541 471 0700

Tel: (East) +1 781 897 1710

e-mail: ussales@pickeringtest.com

France

Tel +33 9 72 58 77 00

e-mail: [email protected]

Germany

Tel: +49 89 125 953 160

e-mail: [email protected]

Sweden

Tel: +46 340-69 06 69

e-mail: [email protected]

Czech Republic

Tel: +420 558 987 613

e-mail: [email protected]

China

Tel: +86 4008 799 765

e-mail: [email protected]

Technical Support

For Technical Support please contact Pickering Interfaces either by phone, the website or via e-mail.

Warranty

All products manufactured by Pickering Interfaces are warranted against defective materials and workmanship for a period

of three years, excluding programmable power supplies, from the date of delivery to the original purchaser. Any product

found to be defective within this period will, at the discretion of Pickering Interfaces be repaired or replaced.

Products serviced and repaired outside of the warranty period are warranted for ninety days.

Extended warranty and service are available. Please contact Pickering Interfaces by phone, the website or via e-mail.

Environmental Policy

Pickering Interfaces operates under an environmental management system similar to ISO 14001.

Pickering Interfaces strives to fulﬁl all relevant environmental laws and regulations and reduce wastes and releases to the

environment. Pickering Interfaces aims to design and operate products in a way that protects the environment and the health

and safety of its employees, customers and the public. Pickering Interfaces endeavours to develop and manufacture products

that can be produced, distributed, used and recycled, or disposed of, in a safe and environmentally friendly manner.

Page (iv)

Meaning/Description Symbol

PROTECTIVE EARTH (GROUND)

To identify any terminal which is intended for connection to an

external conductor for protection against electric shock in case of a

fault, or the terminal of a protective earth (ground) electrode.

DANGEROUS VOLTAGE

To indicate hazards arising from dangerous voltages.

WARNING/CAUTION

An appropriate safety instruction should be followed or caution to a

potential hazard exists.

Refer to the relevant instructions detailed within the product

manual.

HEAVY

If this product is heavy reference should be made to the safety

instructions for provisions of lifting and moving.

STATIC SENSITIVE

To indicate that static sensitive devices are present and handling

precautions should be followed.

Safety Symbols

The following safety symbols may be used on the product and throughout the product documentation.

Product Safety

Page (v)

Contents

Copyright Statement........................................................................................................................................................(ii)

Technical Support and Warranty...................................................................................................................................(iii)

Product Safety...................................................................................................................................................................(iv)

Contents (this page).........................................................................................................................................................(v)

Warnings and Cautions...................................................................................................................................................(vi)

Section 1

Technical Speciﬁcation....................................................................................................................................................1.1

Drive Current...............................................................................................................................................................1.15

Usable Panel Area......................................................................................................................................................1.15

Section 2

Technical Description ......................................................................................................................................................2.1

Functional Description...............................................................................................................................................2.1

Section 3

Installation.........................................................................................................................................................................3.1

Pre Operation Checks ................................................................................................................................................3.1

Hardware Installation................................................................................................................................................3.2

Software Installation..................................................................................................................................................3.2

Testing Operation........................................................................................................................................................3.3

Section 4

Programming Guide.........................................................................................................................................................4.1

Programming Options for Pickering PXI/PXIe Modules......................................................................................4.1

Module Architecture...................................................................................................................................................4.2

Programming the Switches ......................................................................................................................................4.3

Using Pickering Drivers in LabVIEW.......................................................................................................................4.6

Section 5

Switch Dimensions............................................................................................................................................................5.1

Section 6

Trouble Shooting..............................................................................................................................................................6.1

Section 7

Maintenance Information................................................................................................................................................7.1

Page (vi)

WARNING - Hazardous Environments Symbol

This product is not speciﬁcally designed for use in hazardous environments, for example in explosive

atmospheres. If the product is to be used in hazardous environments we recommend that the user ensures

suitable protective measures are taken.

CAUTION - Handling of Electrostatic-Sensitive Devices Symbol

Certain semiconductor devices used in this equipment are liable to damage due to static voltage. Observe the

following precautions when handling these devices in their unterminated state, or sub-assemblies containing

these devices:

• Persons removing sub-assemblies from equipment using these devices must be earthed by a wrist strap

and a resistor at the point provided on the equipment.

• Soldering irons used during the repair operations must be low voltage types with earthed tips and isolated

from the mains voltage by a double insulated transformer.

• Outer clothing worn must be unable to generate static charges.

• Printed Circuit Boards (PCBs) ﬁtted with these devices must be stored and transported in anti-static bags.

Warnings & Cautions

WARNING - Danger of Electric Shock Symbol

This module may contain hazardous voltages. Before removing the module from the rack remove all supplies

and disconnect user I/O signals.

Unused slots in the PXI/PXIe/LXI chassis are populated with blanking plates to prevent access to user I/O

signals that may be present. Blanking panels are available to order from Pickering in a variety of slot widths.

If the product is not used in this manner for example by using an extender card then additional care must be

taken to avoid contact with exposed signals.

CAUTION - Product Documentation Symbol

Suitably qualiﬁed & trained users should ensure that the accompanying documentation is fully read and

understood before attempting to install or operate the product.

Safety Instructions

All cleaning and servicing requires the equipment to be isolated and disconnected from the power source and user I/O signals

(refer to the Maintenance Section).

• Appropriate manual handling procedures should be followed as dictated by the weight of the individual module or the

combined weight of the modules & chassis.

• Should a fault occur with the module or chassis, immediately isolate and disconnect the incoming power to the chassis and

the user I/O signals.

• Ensure the equipment is installed, operated and maintained by trained and authorised personnel.

• For suitably equipped products in the event of an emergency press the red “emergency stop” button situated on the front of

the unit.

WARNING

Only the correct connector series should be mated with these modules. The modules in the 4x-890 range using SMA

connectors should only be mated with the correct SMA type, failure to do so may result in damage to the connector.

Also, it is important that the connector’s nut is properly tightened to the correct torque. For SMA connectors, this

should be with a 5/16 inch wrench and be 3-5 in·lbs (0.3 to 0.6 N·m) for brass, or 7-10 in·lbs (0.8–1.1 N·m) for

stainless steel. For N-type connectors, this should be with an 18mm wrench and be 15 in·lbs (1.7 N·m).

Page 1.1 pickeringtest.com

Section 1 - Technical Speciﬁcation

yAvailable as a PXI or PXIe Module

yMay be Speciﬁed With a Mix of High Performance

Microwave Relays up to 110 GHz Bandwidth & a

Range of Connector Types

yOptions Available in 50 Ω or 75 Ω Impedance

yAvailable Relays Include Transfer, SPDT, SP4T, SP6T,

SP8T, SP10T & SP12T in Unterminated & Terminated

Versions

yFlexibility in Topology & Speciﬁcation

yDeﬁne the Panel layout with Microwave Switch

Design Tool Application

yLED Indication (Conﬁguration Dependant)

yExcellent RF & Repeatability Characteristics

yRelay Cycle Counting Included

yDrivers Supplied for Windows & Linux, Plus

Support for Real-time Systems

yPXI Versions Supported by PXI or LXI Chassis

yPXIe Versions Supported by PXI Hybrid or PXIe Chassis

y3 Year Warranty (110 GHz Options, 1 Year Warranty)

The 40-890 (PXI) and 42-890 (PXIe) range of PXI microwave

modules allows users to specify the mix of relay types,

frequencies and quantities based on the application

requirements within the capabilities of the module driver

card. Choose from the extensive relay selection already

available in the Pickering microwave range to create a

ﬂexible solution.

Switch Type Termination

Bandwidth & Connector Type

2.5 GHz

DIN 1.6/5.6

(75 Ω)

3 GHz

SMA

(50 Ω)

6 GHz

SMA

(50 Ω)

8 GHz

N-Type

(50 Ω)

12.4 GHz

N-Type

(50 Ω)

18 GHz

SMA

(50 Ω)

22 GHz

SMA

(50 Ω)

26.5 GHz

SMA

(50 Ω)

40 GHz

SMA 2.9

(50 Ω)

50 GHz

SMA 2.4

(50 Ω)

67 GHz

SMA 1.85

(50 Ω)

110 GHz

SMA 1.0

(50 Ω)

Transfer (DPDT)

Unterminated

✔ ✔ ✔ ✔ ✔ ✔

SPDT ✔ ✔ ✔ ✔ ✔ ✔ ✔

SP4T ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔

SP6T ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔

SP8T ✔ ✔ ✔

SP10T ✔ ✔ ✔

SP12T ✔ ✔

SPDT

Terminated

✔ ✔ ✔ ✔ ✔

SP4T ✔ ✔ ✔ ✔ ✔ ✔

SP6T ✔ ✔ ✔ ✔ ✔ ✔

SP8T ✔ ✔

SP10T ✔ ✔

SP12T ✔

An example conﬁguration could include a combination of two

SP6T plus one SPDT relay that can be externally cabled to create

a SP12T multiplexer for frequency ranges where a dedicated

12:1 multiplexer is not available.

Flexible solutions can also reduce the chassis slot count by

permitting different relay types to be ﬁtted in a single module.

Each ﬂexible build will be assigned a speciﬁc part number in the

4x-890 series to provide traceability and to ease the reordering

process.

Microwave Switch Design Tool (MSDT)

The MSDT is an on-line application accessed via the Pickering

interfaces website that can be used to generate front panel

solutions for ﬂexible products. Users can select from the

full range of microwave relays then add LED indicators and

graphical features such as components identiﬁers / logos to

create a panel layout suited to the application.

Representative Images

of Microwave Modules

pickeringtest.com

4x-890

PXI/PXIe Flexible Microwave Module

PRELIMINARY DATA

Issue E November 2023

Page 1.2 pickeringtest.com

Section 1 - Technical Speciﬁcation

LED Energised Path Indicators

Space permitting, each microwave relay ﬁtted to a 4x-890

module has associated frontpanel LED indicators to show the

current energised path through the relay, as illustrated in the

ﬁgure above. This signal path indication greatly simpliﬁes the

debug of test application software.

Manual Control

The 4x-890 is supplied with soft front panels for each of the

ﬁtted relays, as shown here. These enable graphical manual

control of the switches to simplify application software

development and debug.

Easy Repair

To facilitate fast in-ﬁeld repair, wherever possible we ﬁt relay

types that may be quickly replaced by simply withdrawing

them through the front panel.

Conﬁguration Restrictions

Whilst offering a high degree of ﬂexibility in relay population

there are some restrictions applicable to the ﬂexible

conﬁgurations.

Mechanical - the maximum number of chassis slots occupied by

a single module is six. The relay physical sizes varies between

switch types, for details refer to the user manual. Alternately, to

assist with visualising the panel layout Pickering’s Microwave

Switch Design Tool (MSDT) online application can be used to

deﬁne the relay quantities, types and positions.

Electrical - the driver card has twenty-four control lines,

grouped both in banks of six or individually with each relay

coil typically requiring a single control line. Each SPDT or

transfer switches is controlled by an individual drive line.

For multiplexers, a single six channel bank is required for

SP4T and SP6T multiplexers with higher channel count

multiplexers controlled via multiple banks.

Due to the ﬂexible nature of the product range it is

recommended that your local sales ofﬁce is contacted to

review your requirements as this will allow for the most

efﬁcient relay loading to be determined.

Relay Cycle Counting

To aid with module “health” monitoring all versions are

provided with a relay cycle counting cycle feature. The

number of operations per contact are stored on the module

and can be used to determine if a relay is approaching EOL.

This information could allow system connections to be

revised so that signals applied to heavily used contacts are

swapped with lightly used contacts to prolong the working

life of the relay(s).

4x-890

pickeringtest.com Page 2

PRELIMINARY DATA

PXI/PXIe Flexible Microwave Module

Page 1.3 pickeringtest.com

Section 1 - Technical Speciﬁcation

off

Terminated SP6T Switch

off

Terminated SP4T Switch

SP6T Switch

off

SP4T Switch

Internally Terminated

SPDT Switch

Transfer Switch

B B

Position A: 1 to 2, 3 to 4

Position B: 1 to 3, 2 to 4

Terminated SP12T Switch

off

Terminated SP10T Switch

off

Terminated SP8T Switch

SP10T Switch

off

SP12T Switch

off

SP8T Switch

off

Externally Terminated

SPDT Switch

Available Switch Types

4x-890

pickeringtest.com Page 3

PRELIMINARY DATA

PXI/PXIe Flexible Microwave Module

Page 1.4 pickeringtest.com

Section 1 - Technical Speciﬁcation

Speciﬁcations - Transfer Switches

Bandwidth 2.5 GHz 3 GHz 18 GHz 26.5 GHz 40 GHz 50 GHz

Characteristic

Impedance 75 Ω 50 Ω 50 Ω 50 Ω 50 Ω 50 Ω

Connector Type 1.6/5.6 SMA SMA SMA SMA-2.9 SMA-2.4

Operate Time 15 ms 15 ms 15 ms 15 ms 15 ms 15 ms

Insertion Loss

0.2 dB - 1 GHz

0.3 dB - 2.5 GHz

0.2 dB - 3 GHz 0.2 dB - 3 GHz

0.3 dB - 8 GHz

0.4 dB - 12.4 GHz

0.5 dB - 18 GHz

0.2 dB - 3 GHz

0.3 dB - 8 GHz

0.4 dB - 12.4 GHz

0.5 dB - 18 GHz

0.7 dB - 26.5 GHz

0.3 dB - 6 GHz

0.4 dB - 12.4 GHz

0.5 dB - 18G Hz

0.7 dB - 26.5 GHz

0.8 dB - 40 GHz

0.3 dB - 6 GHz

0.4 dB - 12.4 GHz

0.5 dB - 18 GHz

0.7 dB - 26.5 GHz

0.8 dB - 40 GHz

1.1 dB - 50 GHz

Isolation

80 dB - 1 GHz

70 dB - 2.5 GHz

80 dB - 3 GHz 80 dB - 3 GHz

70 dB - 8 GHz

65 dB - 12.4 GHz

60 dB - 18 GHz

80 dB - 3 GHz

70 dB - 8 GHz

65 dB - 12.4 GHz

60 dB - 18 GHz

50 dB - 26.5 GHz

70 dB - 6 GHz

60 dB - 12.4 GHz

60 dB - 18 GHz

55 dB - 26.5 GHz

50 dB - 40 GHz

70 dB - 6 GHz

60 dB - 12.4 GHz

60 dB - 18 GHz

55 dB - 26.5 GHz

50 dB - 40 GHz

50 dB - 50 GHz

VSWR

1.2:1 - 1 GHz

1.3:1 - 2.5 GHz

1.2:1 - 3 GHz 1.2:1 - 3 GHz

1.3:1 - 8 GHz

1.4:1 - 12.4 GHz

1.5:1 - 18 GHz

1.2:1 - 3 GHz

1.3:1 - 8 GHz

1.4:1 - 12.4 GHz

1.5:1 - 18 GHz

1.7:1 - 26.5 GHz

1.3:1 - 6 GHz

1.4:1 - 12.4 GHz

1.5:1 - 18 GHz

1.7:1 - 26.5 GHz

1.9:1 - 40 GHz

1.3:1 - 6 GHz

1.4:1 - 12.4 GHz

1.5:1 - 18 GHz

1.7:1 - 26.5 GHz

1.9:1 - 40 GHz

2.0:1 - 50 GHz

RF Average

Carry Power

at 25 °C

400 W - 1 GHz

240 W - 2.5 GHz

240 W - 3 GHz 240 W - 3 GHz

150 W - 8 GHz

120 W - 12.4 GHz

100 W - 18 GHz

240 W - 3 GHz

150 W - 8 GHz

120 W - 12.4 GHz

100 W - 18 GHz

40 W - 26.5 GHz

80 W - 6 GHz

60 W - 12.4 GHz

50 W - 18 GHz

20 W - 26.5 GHz

10 W - 40 GHz

40 W - 6 GHz

30 W - 12.4 GHz

25 W - 18 GHz

15 W - 26.5 GHz

5 W - 40 GHz

3 W - 50 GHz

Expected Life

(operations) 2.5 million 2.5 million 2.5 million 2.5 million 2.5 million 2.5 million

off

Terminated SP6T Switch

off

Terminated SP4T Switch

SP6T Switch

off

SP4T Switch

Internally Terminated

SPDT Switch

Transfer Switch

B B

Position A: 1 to 2, 3 to 4

Position B: 1 to 3, 2 to 4

Terminated SP12T Switch

off

Terminated SP10T Switch

off

Terminated SP8T Switch

SP10T Switch

off

SP12T Switch

off

SP8T Switch

off

Externally Terminated

SPDT Switch

4x-890

pickeringtest.com Page 4

PRELIMINARY DATA

Speciﬁcations

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Pickering Unité de contrôle

Pickering

Pickering 40-533B Manuel utilisateur

Pickering

Pickering PXI BRIC 40-560A Manuel utilisateur

Pickering

Pickering 40-559 Manuel utilisateur

Pickering

Pickering 40-587B Manuel utilisateur

Pickering

Pickering 60-553 Manuel utilisateur

Pickering

Pickering 40-529A Manuel utilisateur

Pickering

Pickering 45-542 Manuel utilisateur

Pickering

Pickering Pxi 41-750 Manuel utilisateur

Pickering

Pickering PXI BRIC 40-562A Manuel utilisateur

Pickering

Pickering 40-656A Manuel utilisateur

Pickering

Pickering 40-565A Manuel utilisateur

Pickering

Pickering 40-781 Manuel utilisateur

Pickering

Pickering PXI 40-664A Manuel utilisateur

Pickering

Pickering PXI 40-535 Manuel utilisateur

Pickering

Pickering 41-760 Manuel utilisateur

Pickering

Pickering 40-519B Manuel utilisateur

Pickering

Pickering 40-584 Manuel utilisateur

Pickering

Pickering PXI 40-510 Manuel utilisateur

Pickering

Pickering PXI 40-855 Manuel utilisateur

Pickering

Pickering PXI 41-181 Manuel utilisateur

Pickering

Pickering 40-262 Manuel utilisateur

Pickering

Pickering PXi 41-720 Manuel utilisateur

Pickering

Pickering 40-265 Manuel utilisateur

Pickering

Pickering PXI BRIC 40-569 Manuel utilisateur

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur