Patton electronics 1058 Manuel utilisateur

USER

MANUAL

VLINK MODEM

Model 1058 & 1068

SALES OFFICE

(301) 975-1000

TECHNICAL SUPPORT

(301) 975-1007

Part# 07MVLINK Rev.A

Doc# 058091U Rev. C

Revised 3/20/03

An ISO-9001Certiﬁed

Company

CONTENTS

1.0 Warranty Information ................................................................. 4

1.1 Radio and TV Interference............................................................ 4

1.2 CE Notice...................................................................................... 4

1.3 FCC Part 68 (DV Version Only).................................................... 5

1.4 Industry Canada Notice................................................................ 6

1.5 Service.......................................................................................... 6

2.0 General Information.................................................................... 7

2.1 Features........................................................................................ 7

2.2 Description.................................................................................... 7

3.0 Installation................................................................................... 9

3.1 Standalone unit installation........................................................... 9

3.2 Rack card installation.................................................................. 10

3.3 Connecting the Twisted-Pair Line Interface................................ 11

3.4 Connecting the 10/100Base-T Ethernet Interface ...................... 12

Connecting the 10/100Base-T Ethernet Port to a Hub............... 13

Connecting the 10/100Base-T Ethernet Port to a PC (DTE)...... 13

3.5 Connecting the POTS/ISDN line................................................. 13

3.6 Connecting Power ...................................................................... 14

4.0 Configuration (Model 1068 Only) ............................................ 15

4.1 Configuring the hardware DIP switches...................................... 15

4.2 Configuring DIP Switch S1 ......................................................... 17

Switch S1-1: Ethernet Auto Sense............................................. 17

Switches S1-2 and S1-4: Data Rate........................................... 17

5.0 Operation................................................................................... 19

5.1 Power Up.................................................................................... 19

5.2 Front Panel LED Status Monitors............................................... 19

A Specifications ........................................................................... 22

A.1 LAN Connection .......................................................................... 22

A.2 Transmission Line ....................................................................... 22

A.3 VDSL Line Rate ........................................................................... 22

A.4 VDSL Distance ............................................................................ 22

A.5 VDSL Surge Suppressor ............................................................. 22

A.6 LED Status Indicators ................................................................. 22

A.7 Power Supply .............................................................................. 22

A.8 Temperature Range .................................................................... 23

A.9 Humidity ...................................................................................... 23

A.10 Dimensions ................................................................................. 23

B Model 1058 Series Factory

Replacement Parts and Accessories...................................... 24

C MODEL 1068 series Factory

Replacement Parts and Accessories...................................... 25

D VLINK Series Interface Pin Assignment................................. 26

D.1 10/100Base-T Interface .............................................................. 26

RJ-45.......................................................................................... 26

D.2 VDSL Interface ............................................................................ 26

RJ-45.......................................................................................... 26

Terminal Block............................................................................ 26

D.3 POTS/ISDN Interface .................................................................. 26

RJ-45.......................................................................................... 26

E Distance Chart, Based on 24 AWG (0.5 MM).......................... 27

1.0 WARRANTY INFORMATION

Patton Electronics

warrants all VLINK modem components to be free

from defects, and will—at our option—repair or replace the product

should it fail within one year from the ﬁrst date of the shipment.

This warranty is limited to defects in workmanship or materials, and does

not cover customer damage, abuse or unauthorized modiﬁcation. If this

product fails or does not performs as warranted, your sole recourse shall

be repair or replacement as described above. Under no condition shall

Patton Electronics

be liable for any damages incurred by the use of this

product.These damages include, but are not limited to, the following: lost

proﬁts, lost savings and incidental or consequential damages arising

from the use of or inability to use this product.

Patton Electronics

spe-

ciﬁcally disclaims all other warranties, expressed or implied, and the

installation or use of this product shall be deemed an acceptance of

these terms by the user.

Note

Conformity documents of all Patton products can be viewed

online at www.patton.com under the appropriate product page.

1.1 RADIO AND TV INTERFERENCE

The VLINK modem generates and uses radio frequency energy, and if

not installed and used properly-that is, in strict accordance with the man-

ufacturer’s instructions-may cause interference to radio and television

reception.The VLINK modem has been tested and found to comply with

the limits for a Class A computing device in accordance with speciﬁca-

tions in Subpart B of Part 15 of FCC rules, which are designed to provide

reasonable protection from such interference in a commercial installa-

tion. However, there is no guarantee that interference will not occur in a

particular installation. If the VLINK modem does cause interference to

radio or television reception, which can be determined by disconnecting

the unit, the user is encouraged to try to correct the interference by one

or more of the following measures: moving the computing equipment

away from the receiver, re-orienting the receiving antenna and/or plug-

ging the receiving equipment into a different AC outlet (such that the

computing equipment and receiver are on different branches).

1.2 CE NOTICE

The CE symbol on your Patton Electronics equipment indicates that it is

in compliance with the Electromagnetic Compatibility (EMC) directive

and the Low Voltage Directive (LVD) of the European Union (EU). A Cer-

tiﬁcate of Compliance is available by contacting Technical Support.

1.3 FCC PART 68 (DV VERSION ONLY)

This equipment complies with Part 68 of the FCC Rules.Please note the

following:

This equipment complies with Part 68 of FCC rules and the requirements

adopted by ACTA.On the, bottom side of this equipment is a label that

contains, among other information, a product identiﬁer in the format US:

AAAEQ##TXXXX. If requested, this number must be provided to the

telephone company.

• Universal Service Order code (USOC) jack: RJ-11C

• Facility Interface Code: 02LS2

• Service Order Code (SOC): 9.0F

• REN No.: 0.2

A plug and jack used to connect this equipment to the premises wiring

and telephone network must comply with the applicable FCC Part 68

rules and requirements adopted by the ACTA.

The REN is used to determine the number of devices that may be con-

nected to a telephone line.Excessive RENs on a telephone line may

result in the devices not ringing in response to an incoming call.In most

but not all areas, the sum of RENs should not exceed ﬁve (5.0).To be

certain of the number of devices that may be connected to a line, as

determined by the total RENs, contact the local telephone company.The

REN for this product is part of the product identiﬁer that has the format

US:AAAEQ##TXXXX.The digits represented by ## are the REN without

a decimal point (e.g., 03 is a REN of 0.3).

Caution

The Model 1058/1068D is not intended to be connected

to the public telephone network.

Caution

The VLINK modem port is not intended to be connected

to the public telephone network. The 1058/1068DV con-

tains a POTS/ISDN connection that can be connected to

the public telephone network.

If this equipment causes harm to the telephone network, the telephone

company will notify you in advance that temporary discontinuance of ser-

vice may be required. But if advance notice isn't practical, the telephone

company will notify the customer as soon as possible.Also, you will be

advised of your right to ﬁle a complaint with the FCC if you believe it is

necessary.

The telephone company may make changes in its facilities, equipment,

operations or procedures that could affect the operation of the equip-

ment.If this happens the telephone company will provide advance notice

in order for you to make necessary modiﬁcations to maintain uninter-

rupted service.

If trouble is experienced with this equipment, for repair or warranty infor-

mation, please contact our company.If the equipment is causing harm to

the telephone network, the telephone company may request that you dis-

connect the equipment until the problem is resolved.

Connection to party line service is subject to state tariffs. Contact the

state public utility commission, public service commission or corporation

commission for information.

1.4 INDUSTRY CANADA NOTICE

NOTICE:This equipment meets the applicable Industry CanadaTerminal

Equipment Technical Speciﬁcations.This is conﬁrmed by the registration

number.The abbreviation

before the registration number signiﬁes that

registration was performed based on a Declaration of conformity indicat-

ing that Industry Canada technical speciﬁcations were met.It does not

imply that Industry Canada approved the equipment.

1.5 SERVICE

All warranty and non-warranty repairs must be returned freight prepaid

and insured to Patton Electronics.All returns must have a Return Materi-

als Authorization number on the outside of the shipping container.This

number may be obtained from Patton Electronics Technical Services at:

• Tel:

(301) 975-1007

• Email:

[email protected]

• URL:

http://www.patton.com

Note

Packages received without an RMA number will not be

accepted.

2.0 GENERAL INFORMATION

Thank you for your purchase of this Patton Electronics product.This

product has been thoroughly inspected and tested and is warranted for

one year for parts and labor.If any questions or problems arise during

installation or use of this product, contact Patton Electronics Technical

Support at +1 (301) 975-1007.

2.1 FEATURES

• Easy to install standalone VLINK modems (no conﬁguration required)

• Auto-sensing full or half-duplex Ethernet

• Auto-sensing 10/100Base-T

• Extends network connections up to 6,000 ft (1.83 km) over 2-wire 24-

AWG unconditioned lines

• Switch selectable line rates up to 16.67 Mbps (Model 1068 only)

• 7 symmetric or asymmetric settings via DIP switch (Model 1068 only)

• POTS/ISDN splitter on board

• Transparent operation

• LED indicators for Power, Ethernet Link & Activity, VLINK link & Quality of

Line (QOL)

• Surge suppression up to 20 kA (8/20

• Available in rack-mount or standalone conﬁgurations

• Made in the USA

2.2 DESCRIPTION

The Patton Electronics VLINK/CO* and VLINK/CP VDSL* modems pro-

vide high-speed LAN connections between peered Ethernet LANs,

remote PCs, or any other network enabled 10/100Base-T device.

Operating in pairs, a VLINK/CO (central ofﬁce) located at one end of the

LAN extension and a VLINK/CP (customer premise) at the other end,

these units can automatically forward LAN broadcasts, multicasts, and

frames across a 2-wire voice-grade twisted-pair link.The data is passed

* Only Models 1058/1068DV/CO and 1058/1068DV/CP have

POTS/ISDN splitters on board.

transparently (unmodiﬁed) through theVLINK modems.TheVLINK

modems automatically add and delete MAC addresses, only passing

packets across the VDSL link that are meant for the remote peered LAN.

Figure 1.

Typical application

The VLINK/CO modem and VLINK/CP modem work together to create a

transparent extension between two peered Ethernet LANs.POTS/ISDN

calls can be made over a VDSL link without interfering with the data.

Figure 1 shows a typical point-to-point application.

3.0 INSTALLATION

Because theVLINK modem requires no conﬁguration, it can be installed

quickly. If you are installing a standalone unit, refer to section 3.1 “Standal-

one unit installation”.Otherwise, refer to section 3.2 “Rack card installation”.

Note

If asymmetric transmission or line rates other than 12.5 Mbps

are required (Model 1068 only), refer to section 4.0, “Conﬁgura-

tion (Model 1068 Only)” on page 15.

3.1 STANDALONE UNIT INSTALLATION

Do the following:

1. Connect the line interface between the units (refer to section 3.3,

“Connecting the Twisted-Pair Line Interface” on page 11)

Note

See Figure 2 for the standalone unit’s rear panel arrangements.

2. Connect the Ethernet interface (refer to section 3.4,“Connecting the

10/100Base-T Ethernet Interface” on page 12).

3. Connect the power plug (refer to section 3.6, “Connecting Power” on

page 14).

Figure 2.

VLINK modem standalone rear panel

3.2 RACK CARD INSTALLATION

The VLINK modem rack card comprised a front card and a rear card.Do

the following to install the cards into the rack chassis:

1. Slide the rear card into the back of the chassis along the metal rails.

2. Secure the rear card using the supplied metal screws.

3. Slide the front card into the chassis until you feel resistance as the

front card engages the rear card.When that happens,

gently

push

the front card forward until it is fully seated in the card-edge recepta-

cle of the rear card (it should

click

into place).

4. Secure the front card using the captive fasteners.

Note

The Model 1001R14 chassis supports “hot swapping” of cards,

so it is not necessary to power down the rack when you install or

remove a VLINK modem rack card.

Figure 3.

VLINK modem rack cards

5. Connect the line interface between the units (refer to section 3.3,

“Connecting the Twisted-Pair Line Interface” on page 11)

Note

See Figure 3 for the rack card’s panel arrangements.

Autres manuels pour 1058

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Patton electronics Modem

Patton electronics

Patton electronics OnSite 1052 Series Manuel utilisateur

Patton electronics

Patton electronics 1080A Manuel utilisateur

Patton electronics

Patton electronics 1110ARC Manuel utilisateur

Patton electronics

Patton electronics 2703-X21 Manuel utilisateur

Patton electronics

Patton electronics 1206P Manuel utilisateur

Patton electronics

Patton electronics 1004A Manuel utilisateur

Patton electronics

Patton electronics 1140ARC Manuel utilisateur

Patton electronics

Patton electronics 1140A Manuel utilisateur

Patton electronics

Patton electronics 1088/K Manuel utilisateur

Patton electronics

Patton electronics 1060 Manuel utilisateur

Patton electronics

Patton electronics 1089/I Manuel utilisateur

Patton electronics

Patton electronics 1088/K Manuel utilisateur

Patton electronics

Patton electronics 1094 Manuel utilisateur

Patton electronics

Patton electronics 1025 Manuel utilisateur

Patton electronics

Patton electronics 1082/F Manuel utilisateur

Patton electronics

Patton electronics 1010A Manuel utilisateur

Patton electronics

Patton electronics 1186 Manuel utilisateur

Patton electronics

Patton electronics Kilolight 1184 Manuel utilisateur

Patton electronics

Patton electronics NetLink 1082 Manuel utilisateur

Patton electronics

Patton electronics 1180 Manuel utilisateur

Patton electronics

Patton electronics MODEL 1012AR Manuel utilisateur

Patton electronics

Patton electronics 1070RC Manuel utilisateur

Patton electronics

Patton electronics RocketLink-G 3088 Series Manuel utilisateur

Patton electronics

Patton electronics 1080A Manuel utilisateur

Manuels Modem populaires d'autres marques

Davicom

Davicom DM562AP Manuel utilisateur

EpiValley

EpiValley TATA indicom SXC-1080 Manuel utilisateur

Zte

Zte WiMAX Manuel utilisateur

Intelimax

Intelimax MA-2060 Manuel utilisateur

SMC Networks

SMC Networks D3CM1604V Manuel d'utilisation et d'entretien

Telstra

Telstra Wi-Fi 4G Advanced Pro X Manuel utilisateur

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Manuel utilisateur

Samsung

Samsung AceLink SAM-335A Manuel utilisateur

Enfora

Enfora Enabler-G Guide de configuration rapide

iRZ

iRZ ATM2-232 Manuel utilisateur

Zhone

Zhone 6310 Manuel utilisateur

Paradyne

Paradyne Hotwire 7976 Manuel utilisateur

US Robotics

US Robotics 3453C Manuel utilisateur

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Manuel utilisateur

Zte

Zte MF823 Manuel utilisateur

Four-Faith

Four-Faith F1403 Manuel utilisateur

Sierra Wireless

Sierra Wireless AIRLINK MP595W Manuel utilisateur

Gemtek

Gemtek WiMAX WIXFBR-103 Manuel utilisateur