Patton electronics 1058 Manuel utilisateur

USER

MANUAL

MODEL 1058

VDSL Modem

SALES OFFICE

(301) 975-1000

TECHNICAL SUPPORT

(301) 975-1007

Part# 07M1058-A

Doc# 058091UA

Revised 10/12/01

An ISO-9001Certiﬁed

Company

1.0 Warranty Information .................................................................. 3

1.1 Radio and TV Interference............................................................ 3

1.2 CE Notice...................................................................................... 4

1.3 Service.......................................................................................... 4

2.0 General Information..................................................................... 5

2.1 Features........................................................................................ 5

2.2 Description.................................................................................... 5

3.0 Installation.................................................................................... 7

3.1 Connecting the Twisted-Pair Line Interface.................................. 7

3.2 Connecting the 10/100Base-T Ethernet Interface ........................ 9

Connecting the 10/100Base-T Ethernet Port to a Hub ................. 9

Connecting the 10/100Base-T Ethernet Port to a PC (DTE) ...... 10

3.3 Connecting the POTS/ISDN line................................................. 10

3.4 Connecting Power ...................................................................... 11

4.0 Operation.................................................................................... 12

4.1 Power Up .................................................................................... 12

4.2 Front Panel LED Status Monitors ............................................... 12

A Specifications ............................................................................ 14

A.1 LAN Connection ..........................................................................14

A.2 Transmission Line ........................................................................14

A.3 VDSL Line Rate ............................................................................14

A.4 Actual Data Rate ..........................................................................14

A.5 VDSL Distance .............................................................................14

A.6 VDSL Surge Suppressor ..............................................................14

A.7 LED Status Indicators ..................................................................14

A.8 Power Supply ...............................................................................14

A.9 Temperature Range .....................................................................14

A.10 Humidity .......................................................................................14

A.11 Dimensions ..................................................................................14

B Model 1058 Series Factory

Replacement Parts and Accessories....................................... 15

C Model 1058 Series Interface Pin Assignment ......................... 16

C.1 10/100Base-T Interface: ..............................................................16

RJ-45 .......................................................................................... 16

C.2 VDSL Interface: ............................................................................16

RJ-45 .......................................................................................... 16

Terminal Block............................................................................ 16

C.3 POTS/ISDN Interface: ..................................................................16

RJ-45 .......................................................................................... 16

1.0 WARRANTY INFORMATION

Patton Electronics

warrants all Model 1058 components to be free from

defects, and will—at our option—repair or replace the product should it

fail within one year from the ﬁrst date of the shipment.

This warranty is limited to defects in workmanship or materials, and does

not cover customer damage, abuse or unauthorized modiﬁcation. If this

product fails or does not performs as warranted, your sole recourse shall

be repair or replacement as described above. Under no condition shall

Patton Electronics

be liable for any damages incurred by the use of this

product. These damages include, but are not limited to, the following: lost

proﬁts, lost savings and incidental or consequential damages arising

from the use of or inability to use this product.

Patton Electronics

spe-

ciﬁcally disclaims all other warranties, expressed or implied, and the

installation or use of this product shall be deemed an acceptance of

these terms by the user.

1.1 RADIO AND TV INTERFERENCE

The Model 1058 generates and uses radio frequency energy, and if not

installed and used properly-that is, in strict accordance with the manufac-

turer’s instructions-may cause interference to radio and television recep-

tion. The Model 1058 has been tested and found to comply with the limits

for a Class A computing device in accordance with speciﬁcations in Sub-

part B of Part 15 of FCC rules, which are designed to provide reasonable

protection from such interference in a commercial installation. However,

there is no guarantee that interference will not occur in a particular instal-

lation. If the Model 1058 does cause interference to radio or television

reception, which can be determined by disconnecting the unit , the user

is encouraged to try to correct the interference by one or more of the fol-

lowing measures: moving the computing equipment away from the

receiver, re-orienting the receiving antenna and/or plugging the receiving

equipment into a different AC outlet (such that the computing equipment

and receiver are on different branches).

1.2 CE NOTICE

The CE symbol on your Patton Electronics equipment indicates that it is

in compliance with the Electromagnetic Compatibility (EMC) directive

and the Low Voltage Directive (LVD) of the European Union (EU). A Cer-

tiﬁcate of Compliance is available by contacting Technical Support.

Note

The Model 1058DV is currently awaiting Part 68 approval.

1.3 SERVICE

All warranty and nonwarranty repairs must be returned freight prepaid

and insured to Patton Electronics. All returns must have a Return Materi-

als Authorization number on the outside of the shipping container. This

number may be obtained from Patton Electronics Technical Services at:

• Tel:

(301) 975-1007

• Email:

[email protected]

• URL:

http://www.patton.com

Note

Packages received without an RMA number will not be

accepted.

Caution

This device is not intended to be connected to the public

telephone network.

2.0 GENERAL INFORMATION

Thank you for your purchase of this Patton Electronics product. This

product has been thoroughly inspected and tested and is warranted for

one year for parts and labor. If any questions or problems arise during

installation or use of this product, contact Patton Electronics Technical

Support at +1 (301) 975-1007.

2.1 FEATURES

• Easy to install standalone VDSL modems—

no conﬁguration required

• Auto-sensing full or half-duplex Ethernet

• Auto-sensing 10/100Base-T

• Extends network connections up to 4,652 ft (1,418 m) over 2-wire 24-

AWG unconditioned lines

• 12.5 Mbps symmetric line rate; 10 Mbps data rate

• POTS/ISDN splitter on board

• Transparent operation

• LED indicators for Power, Ethernet Link & Activity, VDSL Link & Error

• Surge supression up to 20 kA (8120

• Available in rack-mount or standalone conﬁgurations

• Made in the USA

2.2 DESCRIPTION

The Patton Electronics Model 1058/CO* and 1058/CP VDSL* modems

provide high-speed LAN connections between peered Ethernet LANs,

remote PC’s, or any other network enabled 10/100Base-T device.

Operating in pairs with a Model 1058/CO (central ofﬁce) located at one

end of the LAN extension and a Model 1058/CP (customer premise) at the

other end, these units can automatically forward LAN broadcasts, multi-

casts, and frames across a 2-wire twisted pair link. The data is passed

transparently (that is, unmodiﬁed) through the 1058s. What’s more, the

1058s automatically add and delete MAC addresses, only passing packets

across the VDSL link that are meant for the remote peered LAN.

* Only Models 1058DV/CO and 1058DV/CP have POTS/ISDN split-

ters on board.

Figure 1.

Typical application

The 1058DV/CO and 1058DV/CP work together to create a transparent

extension between two peered Ethernet LANs. POTS/ISDN calls can be

made over the VDSL link without interfering with the data. Figure 1 shows

a typical point-to-point application.

3.0 INSTALLATION

Because the Model 1058 requires no conﬁguration, it can be installed

and made operational quickly. Installation takes place as follows:

1. Connecting the line interface between the units (refer to section 3.1,

“Connecting the Twisted-Pair Line Interface” on page 7)

Note

See Figure 2 for the rear panel arrangements.

2. Connecing the Ethernet interface (refer to section 3.2, “Connecting

the 10/100Base-T Ethernet Interface” on page 9).

3. Connecting the power plug (refer to section 3.4, “Connecting Power”

on page 11).

Figure 2.

Model 1058 standalone rear panel

3.1 CONNECTING THE TWISTED-PAIR LINE INTERFACE

The Model 1058 supports communication between two peer Ethernet

LAN sites over a distance of up to 4,652 ft (1,418 m) over 24 AWG (0.5

mm) twisted-pair wire.

Note

Actual distance and link performance may vary depending on

the environment and type/guage of wire used.

Ethernet VDSL Link

Power

Made in the USA

POTS/ISDN

twisted-pair

terminal block

interface

Power

jack

Ethernet VDSL Link

Power

Madein the USA

Ethernet

port

VDSL twisted-pair

terminal block

interface

VDSL twisted-pair

RJ-45 interface

POTS/ISDN

1058DV

1058D

Follow the steps below to connect the Model 1058 VDSL Interfaces.

Note

The Model 1058 units work in pairs. One of the units must be a

Model 1058/CO (Central Ofﬁce), and the other unit must be a

Model 1058/CP (Customer Premise). It does not matter which

end is the 1058/CO and which is the 1058/CP. The link is always

initiated by the 1058/CP. As long as the 1058/CO is powered on,

the 1058/CP can establish a link by being powered on or by hav-

ing its power reset.

1. To function properly, the two Model 1058's must be connected

together using twisted-pair, unconditioned, dry, metal wire, between

19 (0.9mm) and 26 AWG (0.4mm). Leased circuits that run through

signal equalization equipment are not acceptable.

2. The Model 1058 is equipped with two interface jacks that can be used

on the VDSL interface, an RJ-45 or a terminal block. These VDSL

interfaces are a two-wire interface. Observe the signal/pin relation-

ships on the Model 1058's VDSL interface jacks.

The RJ-45 connector on the Model 1058's twisted pair interface is polar-

ity insensitive and is wired for a two-wire interface. The signal/pin rela-

tionship is shown in Figure 3.

Figure 3.

Model 1058 (RJ-45) twisted pair line interface.

The terminal block connector on the Model 1058's twisted pair interface

is polarity insensitive and is wired for a two-wire interface. The signal/pin

relationships is shown in Figure 4.

1 (no connection)

2 (no connection)

3 (no connection)

4 (2-Wire RING)

5 (2-Wire TIP)

6 (no connection)

7 (no connection)

8 (no connection)

Figure 4.

Model 1058D (Terminal Block) twisted pair line interface.

3.2 CONNECTING THE 10/100BASE-T ETHERNET INTERFACE

The shielded RJ-45 port labeled

Ethernet

is the 10/100Base-T interface.

This port is designed to connect directly to a 10/100Base-T network.

Figure 5 shows the signal/pin relationships on this interface. You may

connect this port to another Ethernet device via a Type 4 or Type 5 cable

that is up to 328 ft long.

Figure 5.

Model 1058 10/100Base-T RJ-45 Connector Pinout.

Connecting the 10/100Base-T Ethernet Port to a Hub

The Model 1058 10/100Base-T interface is conﬁgured as DTE (Data Ter-

minal Equipment), just like a 10/100Base-T network interface card in a

PC. Therefore, it "expects" to connect to a 10/100Base-T Hub using a

Ethernet VDSLLink

Power

Made in the USA

RING TIP

1 TX+ (data output from 1058)

2 TX- (data output from 1058)

3 RX+ (data input to 1058)

4 (no connection)

5 (no connection)

6 RX- (data input to 1058)

7 (no connection)

8 (no connection)

straight-through RJ-45 cable. Figure 6 diagrams the cable wiring for con-

necting the Model 1058 to a 10/100Base-T hub.

Figure 6.

Wiring diagram for connecting the Model 1058 to a 10/100Base-T hub

Connecting the 10/100Base-T Ethernet Port to a PC (DTE)

The Model 1058 10/100Base-T interface is conﬁgured as DTE (Data Ter-

minal Equipment). If you wish to connect the 1058 to another DTE

devices such as 10/100Base-T network interface card in a PC (or 1058s

in a back-to-back arrangement), you must construct a 10/100Base-T

crossover cable as shown in Figure 7.

Figure 7.

10/100Base-T crossover cable

3.3 CONNECTING THE POTS/ISDN LINE

The RJ-45 port labeled “POTS/ISDN”is the POTS/ISDN interface. A tele-

phone or an ISDN device may be connected to this port and carried over

the VDSL line. The units do not need power for the POTS interface to

1058 10/100Base-T Port

RJ-45 Pin No.

10/100Base-T Hub

RJ-45 Pin No.

1 (TX+)--------------------------------------------------1 (RX+)

2 (TX-)---------------------------------------------------2 (RX-)

3 (RX+)--------------------------------------------------3 (TX+)

6 (RX-)---------------------------------------------------6 (TX-)

1058 10/100Base-T Port

RJ-45 Pin No.

1 (TX+) 1 (TX+)

2 (TX-) 2 (TX-)

3 (RX+) 3 (RX+)

6 (RX-) 6 (RX-)

10/100Base-T DTE

RJ-45 Pin No.

Autres manuels pour 1058

Table des matières

Autres manuels Patton electronics Modem

Patton electronics

Patton electronics 1009 Manuel utilisateur

Patton electronics

Patton electronics 1205 Manuel utilisateur

Patton electronics

Patton electronics 1140 Manuel utilisateur

Patton electronics

Patton electronics Kilolight 1184 Manuel utilisateur

Patton electronics

Patton electronics 1068 Manuel utilisateur

Patton electronics

Patton electronics 1006 Manuel utilisateur

Patton electronics

Patton electronics 1140RC Manuel utilisateur

Patton electronics

Patton electronics 1050patton Manuel utilisateur

Patton electronics

Patton electronics 1088/K Manuel utilisateur

Patton electronics

Patton electronics 1008 Manuel utilisateur

Patton electronics

Patton electronics 1020 Manuel utilisateur

Patton electronics

Patton electronics OnSite 1052 Series Manuel utilisateur

Patton electronics

Patton electronics 1226 Manuel utilisateur

Patton electronics

Patton electronics 1093 Manuel utilisateur

Patton electronics

Patton electronics 1094 Manuel utilisateur

Patton electronics

Patton electronics 1004 Manuel utilisateur

Patton electronics

Patton electronics NetLink 1082/I Manuel utilisateur

Patton electronics

Patton electronics ParaLink 1225 Manuel utilisateur

Patton electronics

Patton electronics 1205P Manuel utilisateur

Patton electronics

Patton electronics 1089/C Manuel utilisateur

Patton electronics

Patton electronics NetLink 1082 Manuel utilisateur

Patton electronics

Patton electronics DIAMONDLINK 3201 Manuel utilisateur

Patton electronics

Patton electronics DIAMONDLINK 3201 Manuel utilisateur

Patton electronics

Patton electronics 1092 Manuel utilisateur

Manuels Modem populaires d'autres marques

Davicom

Davicom DM562AP Manuel utilisateur

EpiValley

EpiValley TATA indicom SXC-1080 Manuel utilisateur

Zte

Zte WiMAX Manuel utilisateur

Intelimax

Intelimax MA-2060 Manuel utilisateur

SMC Networks

SMC Networks D3CM1604V Manuel d'utilisation et d'entretien

Telstra

Telstra Wi-Fi 4G Advanced Pro X Manuel utilisateur

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Manuel utilisateur

Samsung

Samsung AceLink SAM-335A Manuel utilisateur

Enfora

Enfora Enabler-G Guide de configuration rapide

iRZ

iRZ ATM2-232 Manuel utilisateur

Zhone

Zhone 6310 Manuel utilisateur

Paradyne

Paradyne Hotwire 7976 Manuel utilisateur

US Robotics

US Robotics 3453C Manuel utilisateur

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Manuel utilisateur

Zte

Zte MF823 Manuel utilisateur

Four-Faith

Four-Faith F1403 Manuel utilisateur

Sierra Wireless

Sierra Wireless AIRLINK MP595W Manuel utilisateur

Gemtek

Gemtek WiMAX WIXFBR-103 Manuel utilisateur